Pneumax - Hauptkatalog Page 1003
Commercial customer offer**Top sellers from Pneumax GmbH
Rodless cylinders Series 1605 - Ø16 Series 1600, Mechanically coupled cylinders Ø16 General Mechanically coupled cylinder based on the stainless steel strip sealing technology widely used and tested on bigger bore sizes. Available versions: sliding shoe as standard ("MH"). This system ensures high resistance and long life as the carriage which supports the weight is not tied to the piston and therefore the piston only transfers the movement without bearing any force. Air connections: M5 threaded connections. All air connections on one end cap version available. (side-back-bottom side) Mountings: - Foot brackets and intermediate supports if needed (depending on the stroke) - Swivel bracket - Directly in position via the slot on the end caps- in this conditions the air supply can come directly from the mounting plate. Magnetic sensors: sensors series (1590.... , LRS.... and LHS....) can be used directly in the 2 slots on the barrel. Construction characteristics Anodised aluminium Barrel Anodised aluminium Bands Stainless steel External carriage Anodised aluminium Sliding bushes Special technopolymer Piston Acetal resin Cushion bearings Aluminium Piston seals Special NBR Other seals NBR 3 Technical characteristics Fluid Filtered air. No lubrication needed, if applied it shall be continuous. Working pressure 1,5 - 8 bar Working temperature -5°C - +70°C Max. speed 1 m/s (normal working conditions) Max. stroke 2,5 meters Cushioning length 18 mm Please follow the suggestions below to ensure a long life for these cylinders: •use clean and lubricated air •Please adequately evaluate the load involved and its direction, especially in respect to the moving carriage (also see tables for loads and admitted moments). •avoid high speeds together with long strokes and heavy loads: this would produce kinetic energy which the cylinder cannot absorb, especially if used as a limit stop (in this case use mechanical stop device) •evaluate the environmental characteristics of cylinder used (high temperature, hard atmosphere, dust, humidity etc.) Please note: air must be dried for applications with lower temperature. Use hydraulic oils H class (ISO VG32) for correct continued lubrication. Our Technical Department will be glad to help. For applications where a low smooth uniform operations speed is required, you must specify this on your purchase order so that we can use the proper special grease. Use and maintenance This type of cylinder, due to its characteristics, has to be used within certain criteria. Correct use will give long and troublefree operation. Filtered and lubricated compressed air reduce seal wear. Verify that the load will not produce unforeseen stresses. Never combine high speed with heavy load. Always support the long stroke cylinder with intermediate brackets and never exceed the specified working conditions. If maintenance is required, follow the instructions supplied with the repair kit. Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice 3 | 207 Pneumatic actuatiOn End cap
1106 Pages | Valid until 06/2025 | Previous page | Next page
Choose your language
Legal issues
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Request form for special products
The ToolTeam® Procurement Service
Are you looking for products that are shown in the catalogue but cannot be purchased directly online?Our procurement service will be pleased to make you a non-binding and individual offer.