Hymer - Climbing Ladders Page 10
Commercial customer offer**Top sellers from HYMER
EN ISO 14122-4 MAINTENANCE LADDER FOR MACHINE SYSTEMS · The topmost rung must end at the level of the exit area. · From an access height of 10,000 mm, the ladder must be · · installed with offset. The maximum length of a ladder section must not exceed 6,000 mm. The offsets are to be positioned at equal intervals, but can also be planned at different heights on request or by using the online configurator. Distance of the rung-leading-edge of the ladder must be at least 200 mm, but may be reduced to 150 mm in the event of obstacles (e.g. pipes). Exit: · According to EN ISO 14122-4, the exit point must · · meet the highest safety requirements. The exit must be secured with a self-closing safety gate. The gap between ladder and building must not exceed 75 mm. For a standard wall distance between ladder and building of 210 mm, this 75 mm gap is provided by using an exit step. The exit stile must be connected to a guardrail which is 1,500 mm long on both sides of the exit surface. Our supplied guardrail can also be dispensed with if there is an option of connecting to a guardrail provided by the customer. Fastening: The standard wall mounting has a gap of 210 mm from the stile axis to the building. The distance between the individual fastening points must not exceed 2,000 mm. They should preferably be attached below the rungs. · · Safety cage: · Distance from the lowest safety cage clamp to the floor: 2,200 mm to 3,000 mm. · Safety cage required from a height of 3,000 mm. 10 Continuous fall protection on request
40 Pages | Valid until 12/2025 | Previous page | Next page
Choose your language
Legal issues
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Request form for special products
The ToolTeam® Procurement Service
Are you looking for products that are shown in the catalogue but cannot be purchased directly online?Our procurement service will be pleased to make you a non-binding and individual offer.