KS Tools special tools for cars and vans Page 598
Commercial customer offer**Products from catalog page
Silent bearing tool set for Nissan, Renault and Opel front axle • For assembly and disassembly of silent bearings both on and off the vehicle • Removes the removal of the help frame in connection with 700.1290 • Saves a lot of time since the replacement is carried out as it is • Special tool steel consists of: X 700.2377 1 Pressure sleeve interior-Ø 86.0 mm 1,53 700.2374 1 Pressure piece Ø 84.0 mm 0,68 700.2373 1 Pressure piece small Ø 68.0 mm 0,39 700.2376 1 Pressure piece, large Ø 93.5 mm 1,14 700.2394 1 Spindle, 304.0 mm 0,14 Application range: Renault Trafic, Nissan Primaster, Opel Vivaro 2001 – 2013 700.2391 2 Press nut with bearing 0,25 Caution: The spindles must be greased before first use! Overloading leads to unwanted material stresses or breakage Always check the power settings on the drive with a torque wrench Silent bearing tool set for Mercedes • For assembly and disassembly of silent bearings both on and off the vehicle • for replacing the silent bearing from the longitudinal control arm and cross control arm on the front and rear axles • For use alongside mechanical spindle • Saves a lot of time • Special tool steel • In durable plastic storage case Application range: Mercedes W203, W204, W209, W211 and W220 Caution: The spindles must be greased before first use! Overloading leads to unwanted material stresses or breakage Always check the power settings on the drive with a torque wrench Double silent bearing tool set for VAG 700.2180 7 pcs Silent bearing tool set for Nissan, Renault and Opel front axle • For the assembly and disassembly of the double silent bearings on VAG • Enables use directly on the vehicle • Measurement of the axle is not required • Enormous time and cost saving • Secure and easy to use • Special tool steel • In durable plastic storage case 2,42 consists of: 700.2181 Spindle M16 280 700.2182 Press nut M16 151 700.2183 Counter nut M16 51 700.2184 Press sleeve, large 847 700.2185 Pressure plate 330 700.2186 Conical press sleeve 220 700.2187 Press sleeve, small 543 Application range: Volkswagen Caddy 2004–2010, Eos > 2006, Golf V 2003–2009, Scirocco > 2005, Jetta 2005–2010, Passat 2005–2010, Tiguan > 2007, Touran > 2003, Seat Altea > 2004, Leon > 2005, Toledo 2004–2009, Škoda Octavia 2004–2010, Audi A3 > 2005, TT 2006–2010 Silent bearing tool set for rear axle Opel • For the assembly and disassembly of the rear axle silent bearings • Ideal for secure bearings • Saves a lot of time since the replacement is carried out as it is • Secure and easy to use • Ideal for manual use • Special tool steel 150.9780 14 pcs Silent bearing tool set for Mercedes 8,37 consists of: Application range: Opel Astra H (2004 - 2014), Meriva B (>2010), Zafira B (2005 - 2014) Caution: The spindles must be greased before first use! Overloading leads to unwanted material stresses or breakage Always check the power settings on the drive with a torque wrench 150.9783 Pressure plate Ø 84.0 mm 379 150.9781 Drive spindle M14 x 3.0 mm 275 150.9782 Bearing sleeve 379 150.9784 Sleeve with inspection window Ø 81.0 mm 716 150.9785 Pressure piece Ø 69.0 mm 320 150.9786 Pressure piece Ø 82.0 mm, length 35.0 mm 582 150.9787 Pressure piece Ø 82.0 mm, length 33.0 mm 662 150.9788 Collar nut M14 x 3.0 mm 75 150.9789 Pressure piece Ø 82.0 mm, length 36.0 mm 767 150.9790 Pressure piece Ø 69.0 mm, length 30.0 mm 383 150.9791 Sleeve Ø 80.0 mm 632 150.9792 Pressure piece Ø 50.0 mm 174 150.9793 Pre-tensioning tool 449 150.9794 Pressure piece Ø 59.0 mm 314 700.2250 19 pcs Double silent bearing tool set for VAG 8,56 consists of: 700.2251 Spindle installation, M12x1.75 mm 0,35 700.2252 Pressure piece, installation and removal Ø 83 mm 0,87 700.2370 7 pcs 598 Silent bearing tool set for rear axle Opel 5,40 700.2253 Bello, removal Ø 106 mm 1,43 700.2254 Pressure piece, removal Ø 89 mm 0,37 700.2255 Conical ring, installation Ø 106 mm 0,60 700.2256 Pressure piece, installation Ø 82 mm 0,63 700.2257 Mounting holder, 280x22x22 mm 0,92 700.2258 Mounting piece, 22x45.5x31.8 mm 0,20 700.2259 Adjusting holder, 16x49x72 mm 0,25 700.2266 Fixing block, 18x33.7x56 mm 0,18 700.2267 Spindle removal, M16x2.0 to M12x1.75 mm 0,19 700.2268 Nut, M12x1.75 mm 0,04 700.2269 Screw, M6x1.0 mm 0,01 700.2284 Nut with thrust bearing, M12x1.75 mm 0,13 700.2286 Nut with thrust bearing, M16x2.0 mm 0,10
808 Pages | Valid until 07/2024 | Previous page | Next page
Choose your language
Legal issues
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Request form for special products
The ToolTeam® Procurement Service
Are you looking for products that are shown in the catalogue but cannot be purchased directly online?Our procurement service will be pleased to make you a non-binding and individual offer.