KS Tools special tools for cars and vans Page 595
Commercial customer offer**Products from catalog page
1 Press and pull sleeve set Silent bearing set for BMW and Mini front axle • For the assembly and disassembly of bearings • Ideally for silent bearings, hydro bearings, bushings, ball bearings, simmer rings etc. • Universal use for passenger cars, trucks, communal, agricultural and forest vehicles • Outstanding to use also in connection with workshop press or hollow piston cylinder • According to use application the sheaths individually can be reworked • Pressure bearing protects against increased friction during the process • In durable plastic storage case • For the assembly and disassembly of the front silent bearings (hydro bearing) in the wishbone • Saves a lot of time since the replacement is carried out as it is • Special tool steel Application range: BMW Mini R50 Mini One, One D and Cooper from 2001-2006 and R53 Mini Cooper S from 20022006 Caution: The spindles must be greased before first use! Overloading leads to unwanted material stresses or breakage Always check the power settings on the drive with a torque wrench Attention: the spindles need to be greased with a good lubricant for each application! Do not overload spindles, otherwise the thread lengthens and the pitch of the nut and spindle no longer match. The result: the nuts will seize up. Always check the applied force at the drive with a torque wrench! consists of: 2 700.2146 Spindle M12 x 1.75 mm 143 700.2147 Nut, M12 x 1.75 mm 105 700.2148 Tension wrench with t-handle 687 700.2149 Press piece 1 x 57.0 mm 468 700.2150 Press piece 2 x 45.0 mm 232 700.2151 Press piece 3 x 43.0 mm 194 700.2152 Press piece 4 x 58.0 mm 388 700.2153 Press piece 5 x 58.0 mm 420 700.2154 Press piece 6 x 54.7 mm 240 700.2155 Press piece 7 x 53.9 mm 300 3 4 5 Silent bearing tool set for BMW rear axles • For assembly and disassembly of the front and rear spherical bearings • For all rear axle supports • For assembly in built in condition • With pre-tensioning tool suitable for rubber bearings • For damage-free installation and removal • Special tool steel Maximum permitted torque: Spindle M10x1,5 60 Nm Spindle M12x1,5 100 Nm Spindle M14x1,5 180 Nm Spindle M16x1,5 250 Nm Application range: BMW E81/E82/E87/E88 and BMW E90/ E91/E92/E93 spherical bearings on the rear axle 6 7 8 9 10 11 12 700.2135 7 pcs 13 Silent bearing set for BMW and Mini 3,40 front axle consists of: 700.1700 36 pcs Press and pull sleeve set 14,80 consists of: 700.1701 Thrust bolt, M10 125 700.1702 Thrust bolt, M12 124 700.1703 Thrust bolt, M14 130 700.1704 Thrust bolt, M16 130 700.1706 Stepped plate, #1 350 700.1707 Stepped plate, #2 390 700.1708 Stepped plate, #3 420 700.1709 Stepped plate, #4 450 700.1710 Spindle, M10, 350 mm 170 700.1711 Spindle, M12, 350 mm 253 700.1712 Spindle, M14, 350 mm 350 700.1713 Spindle, M16, 350 mm 473 700.1714 Pressure sleeve, internal Ø 34 mm, external Ø 44 mm 250 700.1715 Pressure sleeve, internal Ø 36 mm, external Ø 46 mm 260 700.1716 Pressure sleeve, internal Ø 38 mm, external Ø 48 mm 280 700.1717 Pressure sleeve, internal Ø 40 mm, external Ø 50 mm 290 700.1718 Pressure sleeve, internal Ø 42 mm, external Ø 52 mm 300 700.1719 Pressure sleeve, internal Ø 44 mm, external Ø 54 mm 320 700.1720 Pressure sleeve, internal Ø 46 mm, external Ø 56 mm 330 700.1721 Pressure sleeve, internal Ø 48 mm, external Ø 58 mm 340 700.1722 Pressure sleeve, internal Ø 50 mm, external Ø 60 mm 350 700.1723 Pressure sleeve, internal Ø 52 mm, external Ø 62 mm 370 700.1724 Pressure sleeve, internal Ø 54 mm, external Ø 64 mm 380 700.1725 Pressure sleeve, internal Ø 56 mm, external Ø 66 mm 390 700.1726 Pressure sleeve, internal Ø 58 mm, external Ø 68 mm 410 700.1727 Pressure sleeve, internal Ø 60 mm, external Ø 70 mm 420 700.1728 Pressure sleeve, internal Ø 62 mm, external Ø 72 mm 430 700.1729 Pressure sleeve, internal Ø 64 mm, external Ø 74 mm 440 700.1730 Pressure sleeve, internal Ø 66 mm, external Ø 76 mm 460 700.1731 Pressure sleeve, internal Ø 68 mm, external Ø 78 mm 470 700.1732 Pressure sleeve, internal Ø 70 mm, external Ø 80 mm 480 700.1733 Pressure sleeve, internal Ø 72 mm, external Ø 82 mm 490 14 700.2136 Spindle M14, 205mm 250 700.2137 Nut with bearing 160 700.2138 Pulling sleeve 608 700.2139 Bush with serrated edge 633 700.2140 Disassembly bush with thread 317 700.2141 Assembly bush with thread 391 700.2142 Assembly bush without thread 393 Silent bearing tool set for BMW rear axles • For assembly and disassembly of the lower silent bearings on the rear axle • No removal of the wheel mounts • With pre-tensioning tool suitable for slit silent bearings • For damage-free installation • Special tool steel Application range: BMW E81/E82/E87/E88 and BMW E90/ E91/E92/E93 silent bearings on the rear axle 700.2160 13 pcs Silent bearing tool set for BMW rear axles 15 7,20 16 consists of: X 700.2161 1 Spindle, M16 x 2.0 mm 0,35 700.2162 1 Ring, Ø 32.4 mm 0,03 700.2163 2 Nut, M16 x 2.0 mm 0,07 700.2164 1 Pre-tensioning tool 1,93 700.2165 1 Pressure piece, 58.0 x 38.0 mm 0,22 700.2166 1 Pressure piece, 42.0 x 62.7 mm 0,20 700.2167 1 Pressure piece, 123.0 x 95.0 mm 1,11 700.2168 1 Pressure piece, 128.0 x 100.0 mm 1,19 700.2169 1 Pressure piece, 84.0 mm 0,64 700.2170 1 Pressure piece, 89.0 mm 0,53 700.2171 1 Pressure piece, 87.0 mm 0,42 700.2172 1 Pressure piece, 99.0 mm 0,50 17 18 19 20 21 22 23 24 700.2145 10 pcs Silent bearing tool set for BMW rear axles 25 3,84 595 i
808 Pages | Valid until 07/2024 | Previous page | Next page
Choose your language
Legal issues
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Request form for special products
The ToolTeam® Procurement Service
Are you looking for products that are shown in the catalogue but cannot be purchased directly online?Our procurement service will be pleased to make you a non-binding and individual offer.