KS Tools special tools for cars and vans Page 574
Commercial customer offer**Products from catalog page
consists of: C-clamp and adaptor set, short • Very robust execution • Valuable supplement to the pressure set and hub sheath set 700.1700 • The drive can be used alternatively mechanically or hydraulically • Suitable for impact wrenches • Through use of trapezoid spindle and Impact screw maximum power can be tranferred (Hammer impact effect) • Removeable spindle and clamping device with staged reception plate • Silent bearings, sheaths, bushings etc. lets it incorporated itself in that or expanded condition on and compressed • Trapezoid thread spindle Tr.27 with ball stored pressure tip • Special tool steel Carrier joint tool set for Volkswagen 700.2306 Pressure sleeve for installation 1.54 700.2307 Pressure sleeve for removal, Ø 60 mm 1.64 700.2308 Pressure sleeve for removal, Ø 62 mm 1.40 700.2309 Press sleeve for installation and removal 0.42 accessories: 700.2310 • For the dismantling and assembly of upper carrier joints without removing the wishbone • Hardened spindle with ball lock for pressure sleeves • 3 pressure sleeves adaptor for spindle • 2 forks for installation with locking mechanism for basic unit • Colour coding in dismantling and/or assembly tools • In durable plastic storage case Application range: Volkswagen T4 bus / Multivan / California / pickup etc. Pressure sleeve for removal on models after 2007 1,46 Pressure sleeve set for Mercedes ball joint • Quick and problem-free assembly and disassembly of the ball joint • For use alongside C frame 700.1780 • Special tool steel Application range: Mercedes W211 and W220 700.1780 4 pcs 170,0 65,0 320,0 150,0 6,42 consists of: 700.1781 Uni C-clamp 5,50 700.1782 Spindle with trapazoid thread Tr.27 0,90 700.1783 C attachment set for stepped puller, 2 pcs 0,02 C-clamp and adaptor set, long • Very robust execution • Valuable supplement to the pressure set and hub sheath set 700.1700 • The drive can be used alternatively mechanically or hydraulically • Suitable for impact wrenches • Through use of trapezoid spindle and Impact screw maximum power can be tranferred (Hammer impact effect) • Removeable spindle and clamping device with staged reception plate • Silent bearings, sheaths, bushings etc. lets it incorporated itself in that or expanded condition on and compressed • Trapezoid thread spindle Tr.27 with ball stored pressure tip • Special tool steel 700.1620 4 pcs Pressure sleeve set for Mercedes ball joint 1,42 consists of: 700.1640 6 pcs 700.1621 Pressure sleeve, 57 mm 45.0 400 700.1622 Pressure sleeve, 51 mm 75.0 390 700.1623 Pressure sleeve, 60 mm 90.0 470 700.1624 Pressure sleeve, 33 mm 41.0 150 Pressure sleeve set for Mercedes torsion bar joint • Quick and problem-free assembly and disassembly of the torsion bar joint • For use alongside C frame 700.1755 • Special tool steel Carrier joint tool set for Volkswagen 3,82 consists of: 700.1641 Basic unit with window H=135mm 1,93 700.1642 Spindle TR24, 24mm, L=110mm 0,35 700.1643 Thrust sleeve installation, gold, Ø52xH41mm Thrust sleeve removal no.1, black, Ø40x700.1644 H30mm Thrust sleeve removal no.2, black, 700.1645 Ø40xH30mm 700.1646 Fork removal, black, 55.5mm 0,26 0,19 0,20 0,10 700.1647 Fork installation, gold, 51mm 0,12 700.1648 Retaining ring for spindle 0,00 Application range: Mercedes W211 and W220 700.1755 5 pcs 245,0 95,0 Hinge set for Volvo 380,0 180,0 7,82 • For the assembly and disassembly of the ball joint (ball pins) on the lower front-axle • Can be used directly on the vehicle • Saves a lot of time • Special tool steel consists of: 700.1754 Threaded adaptor+ Ext.1.1/2”x16G 0,60 700.1756 Uni C-clamp 7,00 700.1757 Spindle with trapazoid thread Tr.27 2,00 700.1758 Spindle reception adaptor f.staged discs 0,80 700.1759 C-Clamp reception adaptor f.staged discs 0,60 Application range: Volvo S60 (2000 - 2009), S80 (1998 - 2006), V70 (1999 - 2007), XC70 (1999 - 2007) and XC90 (2002 - 2014) 700.1625 3 pcs Pressure sleeve set Volkswagen and Mercedes • For the assembly and disassembly of the ball joint (ball pins) Ø 45 mm • Can be used directly on the vehicle • Saves a lot of time • For use with the universal press frame 700.1751 and spindle • Special tool steel Pressure sleeve set for Mercedes torsion bar joint 900 consists of: 700.1626 Pressure sleeve, 34 mm 86.0 700.1627 Pressure sleeve, 48 mm 78.5 300 420 700.1628 Pressure sleeve, 37 mm 39.0 180 Application range: Mercedes Sprinter from 1996-2007, Volkswagen LT and Crafter from 1996-2007 700.2305 4 pcs 574 Pressure sleeve set Volkswagen and 5,70 Mercedes 700.1615 6 pcs Hinge set for Volvo 2,73
808 Pages | Valid until 07/2024 | Previous page | Next page
Choose your language
Legal issues
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Request form for special products
The ToolTeam® Procurement Service
Are you looking for products that are shown in the catalogue but cannot be purchased directly online?Our procurement service will be pleased to make you a non-binding and individual offer.