KS Tools special tools for cars and vans Page 567
Commercial customer offer**Products from catalog page
1 MEAWZL MECHANICAL AXLE TOOLS - STEERING consists of: Multilink wheel alignment auxiliary bridge set for VAG 2 • Ideally suited to front track centring • Also suitable for installation • Includes six adapter pairs • Can also be used on lowered vehicles • Sturdy design • Aluminium bridge • Adapter made from special steel 3 X Locking screw to the gear rack centring for VAG • Ideally suited to the correct gear rack centre positioning of the steering in order to also carry out the camber initial installation • Insert screws after ensuring floor consistency of the steering with the housing boreholes • Special tool steel Application range: Audi A4, A6, Volkswagen Passat from 1997 onwards 700.1686 1 700.1687 2 Device with guide bolts for joint head fixing Clamp jaws for device 700.1688 1 Joint head fixing, long, Ø 12 mm 280 700.1689 1 Joint head fixing, short, Ø 12 mm 190 700.1695 1 Joint head fixing, Ø 10 mm 170 700.1696 1 222 700.1697 1 700.1698 1 Joint head fixing, Ø 17.5 mm Adaptor for device and joint head fixing Depth gauge for four-wheel drive axles (VAG) 325 182 261 Application range: Audi A4, A6, A8 and Volkswagen Passat as well as all Volkswagen group vehicles with multi-drive axles 4 203 5 Alignment tool set for passenger car vehicle 700.1694 Locking screw to the gear rack centring for VAG 20 Locking screw set for gear rack centring • Ideally suited to the correct gear rack centre positioning of the steering in order to also carry out the camber initial installation • Insert screws after ensuring floor consistency of the steering with the housing boreholes • Special tool steel Application range: Mercedes W107, W114, W115, W116 700.1690 3 pcs Locking screw set for gear rack centring • This was specially developed specifically for use on cars and vans with 4 or 5 hole pitch • Ideal for practical assistance with repairs and assembly of steering and chassis components for motor vehicles • Ideal for replacement work on shock absorbers, suspension springs and top mount • Also applicable for the exchanging of tie rod end, tie rod or axle joints • Easy installation and easy handling • Very short setup time - for universal use • Optimization of the repair process by eliminating a time consuming and costly alignment • Economical restoration • In durable plastic storage case Application range: Shock absorbers in vehicles with long hole reception for example Volkswagen Golf / Passat or track parts on adjustable vehicle rear axles for example Mercedes Please note: The use of the chassis adjuster is no replacement for an axle alignment In most cases, the adjustment with the chassis adjuster is however perfectly sufficiently in order to guarantee a flawless function of the axle after a repair has been completed. Method of operating: By means of both lasers points on a screen (e.g. wall, ground, wheel course etc.) a firm designation with adhesive tape mounted. This marks the exit condition before the repair and maesures in the case an intervention into the trace attitude (e.g. trace pole head change) on the driver and passenger side made. After the repair, the laser points, for example through the screwing in and/or turning off of the new trace pole head, are brought again exactly with the designations of the driver and passenger side simutianously At the same time the designation of the unrepaired side serves, for example in an intervention into the slump adjustment, again and again as a reference brand. 100 consists of: 700.1691 Locking screw 1 33 700.1692 Locking screw 2 33 700.1693 Locking screw 3 33 6 7 8 700.1630 13 pcs Multilink wheel alignment auxiliary bridge set for VAG 29,10 9 consists of: 700.1631 Axle gauge auxiliary bridge 10 24.20 700.1632 Adaptor set with thread, Audi A8, long, 2 pcs Adaptor set with thread, Audi A8, short, 700.1633 2 pcs Adaptor set without thread, Audi A8, long, 700.1634 2 pcs 700.1635 Adaptor set with thread, Audi A4, long, 2 pcs Adaptor set with thread, Audi A4, short, 700.1636 2 pcs Adaptor set without thread, Audi A4, short, 700.1637 2 pcs 1.35 0.22 11 0.75 1.02 0.82 12 0.49 13 Eccentric clamping and turning device • Universally applicable one sided opening • To remove and turning the tie rod joints (steering and wheel end) • Due to the knurled eccentric cam it allows from optimal grip even at the joints without drive (round) • Square drive 1/2” • For use on the workbench or directly on the vehicle • Special tool steel 14 15 16 Push rod gauge set 17 • Ideally suited to changing track rod heads • No further measurement of the axle required • Saves times and reduces costs • Special tool steel • In durable plastic storage case 18 150.1635 1-50 1-42 300 19 Eccentric clamping and turning device • For the removal and rotation of the round or hexagonal track rod joints (steering and wheel end) • Due to the knurled eccentric cam it allows from optimal grip even at the joints without drive (round) • For use on the workbench or directly on the vehicle • Additional stopper prevents slipping during the splitting process • Special tool steel 20 21 22 150.1800 15 pcs Alignment tool set for passenger car vehicle 2,80 23 consists of: 150.1803 Bolt, 4pcs, M12x1.5 700.1685 9 pcs Push rod gauge set 2,80 24 59 150.1804 Bolt, 4pcs, M14x1.5 59 150.1801 Base plates, 4 and 5 hole, 2pcs 598 150.1802 Laser unit, 2pcs 73 150.1805 Roll ‘FIXPOINT’ labels, 300pcs 45 150.1642 25-55 25-46 25 800 567 i
808 Pages | Valid until 07/2024 | Previous page | Next page
Choose your language
Legal issues
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Request form for special products
The ToolTeam® Procurement Service
Are you looking for products that are shown in the catalogue but cannot be purchased directly online?Our procurement service will be pleased to make you a non-binding and individual offer.