KS Tools special tools for cars and vans Page 415
Commercial customer offer**Products from catalog page
1 12V Battery-, Charging- and Starting System Analyzer • Suitable for 12 volt batteries (lead acid, gel, wet cell, MF, VRLA, calcium, AGM and deep cycle batteries) • Automatic control of the entire test procedure through menu navigation • For the quick and simple determination of battery efficiency while taking the temperature compensation into account • Checks the battery condition, charge status, internal resistance, cold start current value • With verification function for the starter battery, starter and load circuit measurement • The measurement results are shown via an accurate 5-digit LCD display • In addition, the measurement results are displayed via coloured symbols: OK, charge and poor • The connection to the battery takes place via two plastic-coated crocodile pole clamps • Avoidance of an overload of the battery through too long of a measurement time • Illuminated and very easy to read LCD display • 0,45 metre long cable allows for flexible work • Resistant rubber cup casing 12V Battery-, Charging- and Starting System Analyzer with integrated printer 12V / 24V Battery-, Charging- and Starting System Analyzer with integrated printer • Suitable for 12 volt batteries (lead acid, gel, wet cell, MF, VRLA, calcium, AGM and deep cycle batteries) • Menu-driven, intuitive operation • With integrated thermal printer • Automatic control of the entire test procedure through menu navigation • For the quick and simple determination of battery efficiency while taking the temperature compensation into account • Checks the battery condition, charge status, internal resistance, cold start current value • Battery selection takes place quickly and precisely via printing protocol • With verification function for the starter battery, starter and load circuit measurement • Printing protocol supports the argumentation for workshop customers • The connection to the battery takes place via two plastic-coated crocodile pole clamps • Avoidance of an overload of the battery through too long of a measurement time • Illuminated and very easy to read digital display • 0,43 metre long cable allows for flexible work • Includes thermal paper roll • Resistant rubber cup casing • suitable for 12 Volt batteries (lead acid, gel, wet cell, MF, VRLA, EFB, AGM flat, AGM spiral and deep cycle batteries) • Menu-driven, intuitive operation • With integrated thermal printer • Automatic control of the entire test procedure through menu navigation • For the quick and simple determination of battery efficiency while taking the temperature compensation into account • Checks the battery condition, charge status, internal resistance, cold start current value • Battery selection takes place quickly and precisely via printing protocol • With verification function for the starter battery, starter and load circuit measurement • Printing protocol supports the argumentation for workshop customers • The connection to the battery takes place via two plastic-coated crocodile pole clamps • Avoidance of an overload of the battery through too long of a measurement time • Illuminated and very easy to read digital display • 3 metre long cable allows for flexible work • including 3 thermal paper rolls, memory card and USB data cable • In a practical storage case 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 Technical data: Work area SAE: 50-800 CCA Work area IEC: 50-800 CCA Work area EN: 50-1.400 CCA Work area CCA: 50-1.400 CCA Voltage range: 1,5-17 V Operating temperature: -18°C up to 55°C Display accuracy: +/- 0,5 Megaohm Frequency range: 100 Hz 550.1646 18 50-1.400 CCA Work area DIN: 1,5-17 V 550.1647 19 20 1,50 21 Technical data: Work area SAE: 40-2.000 CCA Work area DIN: 40-2.000 CCA Work area SAE: 100-1.400 CCA Work area IEC: 40-2.000 CCA Work area DIN: 100-800 CCA Work area EN: 40-2.000 CCA Work area IEC: 100-800 CCA Work area CCA: 40-2.000 CCA Work area EN: 100-1.400 CCA Work area CA / MCA: 40-2.000 CCA Work area CCA: 100-1.400 CCA Work area JIS#: 40-2.000 CCA Voltage range: 7,6-17 V Voltage range: 9-36 V Operating temperature: -18°C up to 55°C Operating temperature: +0°C to +55°C Display accuracy: +/- 0,5 Megaohm Display accuracy: +/- 0,5 Megaohm Frequency range: 100 Frequency range: 100 Hz Technical data: 550.1645 7,6-17 V 1,00 550.1649 9-36 V 550.1647 22 23 24 25 750 415 i
808 Pages | Valid until 07/2024 | Previous page | Next page
Choose your language
Legal issues
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Request form for special products
The ToolTeam® Procurement Service
Are you looking for products that are shown in the catalogue but cannot be purchased directly online?Our procurement service will be pleased to make you a non-binding and individual offer.