KS Tools special tools for utility tools and transporters Page 502
Commercial customer offer**Products from catalog page
LUFREIN consists of: AIR PURIFIER Thermal imaging camera with UV light • Compact thermal imaging camera for applications in construction, electrical engineering, mechanical engineering, automotive industry, etc. • Reliably measure temperature and store images and data for reports • Accurate readings can be taken from safer distances • Colour display for the safe evaluation and analysis of temperature conditions • With a laser pointer for precise positioning • Three selectable colour palettes for image display: hot iron, rainbow and grey • Selectable measuring range between Celsius °C or Fahrenheit °F • Integrated LED lights support working in dark areas • The integrated UV lamps are ideal for the detection of leaks in cooling or air conditioning systems • Adjustable automatic switch-off • Date and time can be set for accurate data acquisition • Integrated micro USB interface • On and off switch is also used to protect the camera • Includes 3xAA batteries • In durable plastic storage case • for replacing the silent bearing from the longitudinal control arm and cross control arm on the front and rear axles 960.1191 Heat blow gun Plasma air-cleaner with ionisator technology • Eliminates odours and disinfects the interior of the vehicle • Compact, lightweight, and high ozone emission • For use in closed passenger compartments • In odour elimination mode, it switches off automatically after 60 minutes • In disinfection mode, it automatically switches off after 30 minutes and immediately switches to odour elimination mode for 30 minutes • Works without chemical additives , guaranteed to leave no residue • It leaves no traces, even on sensitive surfaces • Removes mould, bacteria, fungus and mites • Includes an active carbon HEPA technology replacement filter • Simple operation 670 960.1192 Broad blast pipe 75 mm 20 960.1193 Reflector blast pipe 20 960.1194 Restrictor 45mm 20 960.1195 Restrictor 14mm 50 Digital heat blow gun set • High-performance hot-air gun with two supply levels • Digital seamless temperature regulation • Includes jig for up-right assembly • 10 blower levels • Includes 4 different replacement nozzles • LCD display • Power: 2000W • Supply level 1: 200-300 l/min (max. 450°C) • Supply level 2: 350-500 l/min (max. 650°C) • Temperature settings: 1≈50°C/2≈100°C/3≈200°C/4≈350°C/ 5≈550°C/6≈650°C Application range: Removing paint, soldering pipes, shrinking PVS, welding and bending plastics, drying, thawing etc. Advantages: • Measure temperatures more accurately • Result report with integrated images • Quick fault diagnosis • Safety and greater distance for the employee Contents: • Basic unit • 2 GB micro SD memory cards • Batteries 3xAA Technical data: • Accuracy: ±1.5% or 1.5°C • Measurement range: -30°C to 650°C (-22°F to 1202°F) • Emissivity: 4 pre-set values, user adjustments between ε 0.10 and 1.00 are possible • Distance-to-spot ratio (D:S): 30:1 • Measurement value resolution: 0.1°C/°F • Response time: >125 ms • Spectral range: 8 to 14 µmv • Laser: a laser cross-hair encircles the area being measured • Detector: IR-EX™ technology (integrated IR array sensor with CMOS sensor) • Screen resolution (H x W): 16,384 pixels (128 x 128) • Field of view (H x W): 30.0° • Upper range: 650°C • Thermal sensitivity: 150 mK • Screen refresh rate: <9 Hz • Colour range: 3 (iron, rainbow and grey) • Picture storage format: image in bitmap format (BMP) with temperature and emissivity • Screen: 1.77” TFT colour screen (pixel resolution 128 x 160) • Battery: 3 x AA • Battery life with laser and light: 12 hours • Memory: 2 GB micro SD card • Working temperature: 0°C to 50°C (31°F to 122°F) Technical data: Dimensions: 173x122x49 mm Battery technologie: Lithium-ion Rechargeable battery: 850 mAh Operational voltage: DC 12-24V / AC 100-240V / 50/60 Hz Power consumption: 5W Ozone transformation: 5 mg/h Negative Ion concentration: 3000000 pcs/cm² Covering scope: 15m² 550.1183 550.1199 550.1189 360 HEILUGEBPI HEAT GUNS Heat blow gun set • High-performance hot-air gun with two supply levels • Seamless temperature regulation • Adjustment wheel with marking for 6 temperature settings • Stand for high up-right assembly • Includes 4 different replacement nozzles • Supply level 1: 200-300 l/min (max. 450°C) • Supply level 2: 350-500 l/min (max. 650°C) • Temperature settings: 1≈50°C/2≈100°C/3≈200°C/4≈350°C/ 5≈550°C/6≈650°C Application range: Removing paint, soldering pipes, shrinking PVS, welding and bending plastics, drying, thawing etc. 960.1175 5 pcs Digital heat blow gun set consists of: 960.1176 Heat blow gun, digital 150.3220 502 185,0 54,0 104,0 300 960.1190 5 pcs Heat blow gun set 1,11 850 740 960.1192 Broad blast pipe 75 mm 20 960.1193 Reflector blast pipe 20 960.1194 Restrictor 45mm 20 960.1195 Restrictor 14mm 50
528 Pages | Valid until 07/2024 | Previous page | Next page
Choose your language
Legal issues
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Request form for special products
The ToolTeam® Procurement Service
Are you looking for products that are shown in the catalogue but cannot be purchased directly online?Our procurement service will be pleased to make you a non-binding and individual offer.