KS Tools special tools for utility tools and transporters Page 321
Commercial customer offer**Products from catalog page
1 LENKEINWA STEERING WHEEL INSTALLATION BALANCE consists of: consists of: 2 X Steering Alignment evel with adjustable clamping function • For fast and accurate alignment of the steering wheel during the wheel alignment • For optimal use in the assembly and disassembly of steering wheels • Large clamping range • Clamping via spring pressure • Ideally suitable for passenger cars, vans and trucks • Aluminium 515.3184 155 - 255 + 255 - 355 370,0 265 Alignment tool set for light and heavy commercial vehicle • Universal application, independently of hole spacing and number of bolts • For repair work on steering and suspension components • Restoring of the original wheel adjustment parameters such as toe-in and track width after a repair • when replacing suspension parts, e.g.: Track rod end (ball joint) • Independent of mains power supply and measuring location • In durable plastic storage case Application range: Use of transporters, trucks, buses, trailers and semi-trailers 700.2356 Step pressure sleeve, internal Ø 14 mm, external Ø 24 mm 260 700.1550-80 1 700.2357 Step pressure sleeve, internal Ø 16 mm, external Ø 26 mm 280 700.1551 1 Pull sleeve,internal Ø 60mm,external Ø 70mm Pull sleeve,internal Ø 62mm,external Ø 72mm Pull sleeve,internal Ø 64mm,external Ø 74mm Pull sleeve,internal Ø 66mm,external Ø 76mm Pull sleeve,internal Ø 68mm,external Ø 78mm Pull sleeve,internal Ø 70mm,external Ø 80mm Pull sleeve,internal Ø 72mm,external Ø 82mm Pull sleeve,internal Ø 75mm,external Ø 85mm Pull sleeve,internal Ø 80mm,external Ø 90mm Spindle M10x1.5 700.2358 Step pressure sleeve, internal Ø 18 mm, external Ø 28 mm 300 700.1552 1 Spindle M12x2.0 200 700.2359 Step pressure sleeve, internal Ø 20 mm, external Ø 30 mm 320 700.1553 1 Spindle M14x2.0 350 700.2361 Step pressure sleeve, internal Ø 22 mm, external Ø 32 mm 360 700.1554 1 380 700.2362 Step pressure sleeve, internal Ø 24 mm, external Ø 34 mm 380 700.2363 Step pressure sleeve, internal Ø 26 mm, external Ø 36 mm 400 700.2364 Step pressure sleeve, internal Ø 28 mm, external Ø 38 mm 420 700.2365 Step pressure sleeve, internal Ø 30 mm, external Ø 40 mm 440 700.2366 Step pressure sleeve, internal Ø 32 mm, external Ø 42 mm 460 Spindle M16x2.5 Pressure adapter for step panel commercial vehicle Step panel adaptor with 3 holes, A+B side Pressure nut with lock function for spindle M10 x P1,5 Pressure nut with bearing for spindle M10xP1,5 Pressure nut with lock function for spindle M12 x P1,75 Pressure nut with bearing for spindle M12xP1,75 Pressure nut with lock function for spindle M14 x P2,0 Pressure nut with bearing for spindle M14xP2,0 Pressure nut with lock function for spindle M16 x P2,0 Pressure nut with bearing for spindle M16xP2,0 700.1701 Thrust bolt, M10 700.1702 Thrust bolt, M12 124 700.1706 Stepped plate, #1 350 700.1707 Stepped plate, #2 390 700.1708 Stepped plate, #3 420 700.1709 Stepped plate, #4 450 700.1710 Spindle, M10, 350 mm 170 700.1711 Spindle, M12, 350 mm 253 700.1800-10 Check nut M 10 125 350 700.1800-11 Check nut M 12 350 700.1800-17 Spindle TR 20, short 350 700.1800-19 Thrust bolt TR 20 with bearing 2 pcs 350 consists of: 150.1811 Universal scissors holder, pack of 2 59 150.1812 Laser unit incl. batteries, pack of 2 190 150.1813 Nut with reducing collar M18, pack of 2 160 150.1814 Nut with reducing collar M20, pack of 2 135 150.1815 Roll Fixpoint labels, 300 labels 52 150.1816 Washer with reducing collar M14, pack of 2 50 150.1817 Washer with reducing collar M16, pack of 2 46 1 700.1550-62 1 700.1550-64 1 700.1550-66 1 700.1550-68 1 700.1550-70 1 700.1550-72 1 700.1550-75 1 700.1555 1 700.1556 2 700.1551-01 1 700.1551-02 1 Press and pull sleeve kit 700.1552-01 1 • For the assembly and disassembly of bearings • Ideally for silent bearings, hydro bearings, bushings, ball bearings, simmer rings etc. • Universal use for passenger cars, trucks, communal, agricultural and forest vehicles • Outstanding to use also in connection with workshop press or hollow piston cylinder • According to use application the sheaths individually can be reworked • Pressure bearing protects against increased friction during the process • In durable plastic storage case 700.1552-02 1 700.1553-01 1 700.1553-02 1 700.1554-01 1 700.1554-02 1 Caution: The spindles must be greased before first use! Overloading leads to unwanted material stresses or breakage Always check the power settings on the drive with a torque wrench Not to be combined with other systems Alignment tool set for light and heavy 150.1810 21 pcs 2,82 commercial vehicle 700.1550-60 Maximum allowable torque moments: Spindle (ACME) M10 x P1.5 60 Nm Spindle (ACME) M12 x P2.0 120 Nm Spindle (ACME) M14 x P2.0 150 Nm Spindle (ACME) M16 x P2.5 250 Nm 420 430 3 440 460 470 4 480 490 5 500 520 170 6 350 7 350 140 160 8 120 160 120 9 140 100 140 10 Press and pull sleeve set • For the assembly and disassembly of bearings • Ideally for silent bearings, hydro bearings, bushings, ball bearings, simmer rings etc. • Universal use for passenger cars, trucks, communal, agricultural and forest vehicles • Outstanding to use also in connection with workshop press or hollow piston cylinder • According to use application the sheaths individually can be reworked • Pressure bearing protects against increased friction during the process • In durable plastic storage case Attention: the spindles need to be greased with a good lubricant for each application! Do not overload spindles, otherwise the thread lengthens and the pitch of the nut and spindle no longer match. The result: the nuts will seize up. Always check the applied force at the drive with a torque wrench! Maximum permitted torque: Spindle M10x1,5 60 Nm Spindle M12x1,5 100 Nm Spindle M14x1,5 180 Nm Spindle M16x1,5 250 Nm DRUZUHUSAETZ PRESS AND PULL SLEEVE SET 11 12 13 14 15 16 Press and pull sleeve set • For the assembly and disassembly of bearings • Ideally for silent bearings, hydro bearings, bushings, ball bearings, simmer rings etc. • Universal use for passenger cars, trucks, communal, agricultural and forest vehicles • Outstanding to use also in connection with workshop press or hollow piston cylinder • According to use application the sheaths individually can be reworked • Pressure bearing protects against increased friction during the process • In durable plastic storage case Attention: the spindles need to be greased with a good lubricant for each application! Do not overload spindles, otherwise the thread lengthens and the pitch of the nut and spindle no longer match. The result: the nuts will seize up. Always check the applied force at the drive with a torque wrench! Maximum permitted torque: Spindle M10x1,5 60 Nm Spindle M12x1,5 100 Nm 700.2355 22 pcs Press and pull sleeve set 8,74 17 700.1550 37 pcs Press and pull sleeve kit 17,00 18 consists of: X 700.1550-34 1 700.1550-36 1 700.1550-38 1 700.1550-40 1 700.1550-42 1 700.1550-44 1 700.1550-46 1 700.1550-48 1 700.1550-50 1 700.1550-52 1 700.1550-54 1 700.1550-56 1 700.1550-58 1 Pull sleeve,internal Ø 34mm,external Ø 44mm Pull sleeve,internal Ø 36mm,external Ø 46mm Pull sleeve,internal Ø 38mm,external Ø 48mm Pull sleeve,internal Ø 40mm,external Ø 50mm Pull sleeve,internal Ø 42mm,external Ø 52mm Pull sleeve,internal Ø 44mm,external Ø 54mm Pull sleeve,internal Ø 46mm,external Ø 56mm Pull sleeve,internal Ø 48mm,external Ø 58mm Pull sleeve,internal Ø 50mm,external Ø 60mm Pull sleeve,internal Ø 52mm,external Ø 62mm Pull sleeve,internal Ø 54mm,external Ø 64mm Pull sleeve,internal Ø 56mm,external Ø 66mm Pull sleeve,internal Ø 58mm,external Ø 68mm 250 19 260 280 290 20 300 320 330 21 340 350 22 360 380 390 23 410 700.1760 20 pcs Press and pull sleeve set 8,32 321 i
528 Pages | Valid until 07/2024 | Previous page | Next page
Choose your language
Legal issues
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Request form for special products
The ToolTeam® Procurement Service
Are you looking for products that are shown in the catalogue but cannot be purchased directly online?Our procurement service will be pleased to make you a non-binding and individual offer.