KS Tools special tools for utility tools and transporters Page 295
Commercial customer offer**Products from catalog page
1 Compression and Tension Sleeve Extension Set, Level 1 Spindle set for press and pull sleeve set • For the assembly and disassembly of bearings • Ideally for silent bearings, hydro bearings, bushings, ball bearings, simmer rings etc. • Universal use for construction machines, truck, municipally, country and forestery technology etc. • Outstanding to use also in connection with workshop press or hollow piston cylinder • According to use application the sheaths individually can be reworked • Pressure bearing protects against increased friction during the process • In durable plastic storage case • Supplement set for 700.1700 / 700.1735 • With 4 spindles for KS press and pull sleeve set • Thread lead: 1.5 • Pressure bearing protects against increased friction during the process • Incl. special thread grease • Chrome molybdenum Attention: the spindles need to be greased with a good lubricant for each application! Do not overload spindles, otherwise the thread lengthens and the pitch of the nut and spindle no longer match. The result: the nuts will seize up. Always check the applied force at the drive with a torque wrench! 2 3 Attention: the spindles need to be greased with a good lubricant for each application! Do not overload spindles, otherwise the thread lengthens and the pitch of the nut and spindle no longer match. The result: the nuts will seize up. Always check the applied force at the drive with a torque wrench! 4 5 Maximum permitted torque: Spindle M10x1,5 60 Nm Spindle M12x1,5 100 Nm Spindle M14x1,5 180 Nm Spindle M16x1,5 250 Nm 6 Maximum permitted torque: Spindle M10x1,5 60 Nm Spindle M12x1,5 100 Nm Spindle M14x1,5 180 Nm Spindle M16x1,5 250 Nm Spindle TR20x4 400 Nm 7 8 9 700.1735 13 pcs Spindle set for press and pull sleeve set 10 2,20 consists of: Compression and Tension Sleeve Extension Set, Level 2 X 700.1710 1 Spindle, M10, 350 mm 170 700.1711 1 Spindle, M12, 350 mm 253 700.1712 1 Spindle, M14, 350 mm 350 700.1713 1 Spindle, M16, 350 mm 473 700.1701 2 Thrust bolt, M10 125 700.1702 2 Thrust bolt, M12 124 700.1703 2 Thrust bolt, M14 130 700.1704 2 Thrust bolt, M16 130 980.1085 1 Special thread grease, gun 22 Mechanical spindle set • For the assembly and disassembly of bearings • Ideally for silent bearings, hydro bearings, bushings, ball bearings, simmer rings etc. • Universal use for construction machines, truck, municipally, country and forestery technology etc. • Outstanding to use also in connection with workshop press or hollow piston cylinder • According to use application the sheaths individually can be reworked • Pressure bearing protects against increased friction during the process • In durable plastic storage case • Supplement set for 700.1700 + 700.1800 / 700.1735 + 700.1800 • Universally usable pressure rod including collar nut and pressure piece • Extremely robust spindle with inductively hardened thread • Ideally suited to tool sets 440.0075, 440.0065, 440.0095, 440.0100, 440.0073 and 440.0105 • Special tool steel 11 12 13 14 15 Caution: The spindles must be greased before first use! 16 700.1800 22 pcs Compression and Tension Sleeve Extension Set, Level 1 17 16,60 18 consists of: 700.1800-01 Pressure sleeve, internal Ø 74 mm, external Ø 84 mm 240 440.0035 4 pcs Mechanical spindle set 1,11 700.1800-02 Pressure sleeve, internal Ø 76 mm, external Ø 86 mm 240 700.1800-03 Pressure sleeve, internal Ø 78 mm, external Ø 88 mm 240 700.1800-04 Pressure sleeve, internal Ø 80 mm, external Ø 90 mm 240 700.1805 14 pcs consists of: 700.1800-05 Pressure sleeve, internal Ø 82 mm, external Ø 92 mm 240 Compression and Tension Sleeve Extension Set, Level 2 consists of: 700.1800-06 Pressure sleeve, internal Ø 84 mm, external Ø 94 mm 240 440.0031 Pressure rod with collar nut, M18, 330 mm 700.1800-07 Pressure sleeve, internal Ø 86 mm, external Ø 96 mm 240 440.0032 Ring washer 60 700.1800-08 Pressure sleeve, internal Ø 88 mm, external Ø 98 mm 240 440.0033 Pressure disk, Ø 65 mm 310 700.1800-20 Thrust bolt big, M16 with bearing 700.1800-09 Impact adaptor for step discs 2 pcs 350 440.0007 Collar nut, M18 80 700.1800-21 Pressure sleeve, internal Ø 90 mm, external Ø 100 mm 0,90 700.1800-10 Check nut M 10 350 700.1800-22 Pressure sleeve, internal Ø 92 mm, external Ø 102 mm 0,92 700.1800-11 Check nut M 12 350 700.1800-23 Pressure sleeve, internal Ø 94 mm, external Ø 104 mm 0,94 700.1800-12 Check nut M 14 350 700.1800-24 Pressure sleeve, internal Ø 96 mm, external Ø 106 mm 0,96 700.1800-13 Stepped plate, #1 350 700.1800-25 Pressure sleeve, internal Ø 98 mm, external Ø 108 mm 0,98 700.1800-14 Stepped plate, #2 350 700.1800-26 Pressure sleeve, internal Ø 100 mm, external Ø 110 mm 0,99 700.1800-15 Stepped plate, #3 350 700.1800-27 Pressure sleeve, internal Ø 102 mm, external Ø 112 mm 1,00 700.1800-16 Stepped plate, #4 350 700.1800-28 Pressure sleeve, internal Ø 104 mm, external Ø 114 mm 1,03 700.1800-17 Spindle TR 20, short 350 700.1800-29 Pressure sleeve, internal Ø 106 mm, external Ø 116 mm 1,05 700.1800-18 Spindle TR 20, long 350 700.1800-30 Pressure sleeve, internal Ø 108 mm, external Ø 118 mm 1,06 700.1800-19 Thrust bolt TR 20 with bearing 2 pcs 350 700.1800-31 Pressure sleeve, internal Ø 110 mm, external Ø 120 mm 1,10 22 700.1800-32 Pressure sleeve, internal Ø 112 mm, external Ø 122 mm 1,10 980.1085 Special thread grease, gun 19 16,40 660 20 0,31 21 22 23 295 i
528 Pages | Valid until 07/2024 | Previous page | Next page
Choose your language
Legal issues
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Request form for special products
The ToolTeam® Procurement Service
Are you looking for products that are shown in the catalogue but cannot be purchased directly online?Our procurement service will be pleased to make you a non-binding and individual offer.