KS Tools special tools for utility tools and transporters Page 200
Commercial customer offer**Products from catalog page
SCHLTE consists of: KEY TESTER 12 V infrared and high frequency key tester • Easy, quick and professional testing of infrared and radio (418 + 433 MHz) keys • The keys should be checked at each inspection or servicing, because a new battery or a flashing LED is no guarantee for 100% functionality • Easy handling • The result is signalled via a light or sound • Applicable with 12 V • Includes 9V block battery • Sturdy ABS plastic Voltage test ball with protective insulation, double pole 50 - 1000 V 150.3076 Receiver 200 150.3077 Transmitter with crocodile clamps 200 SPANNPRU VOLTAGE TESTERS Test lamp 6 - 24 V • Tested and accredited in accordance with international standard • Insulated to IEC EN 61243-3 (DIN VDE 0682-401) • Corresponds to EMC requirements in accordance with DIN EN 61326 • DC and AC voltage shown by LED indicators • Rotating field and phase displayed via LEDs • With display of rotating field direction (clockwise and anticlockwise) • Deliberate tripping of a 30 mA ELCB • Test tip protected through a cap • Ideal for helping to locate short circuits and breaks • With shielded crocodile clamp • Stainless steel probe • Brass housing and cap Readout: LED/LCD Power requirement: 300 mA Allowable duty cycle: 30 s Frequency range: 0 - 100 Hz Protection class: IP65 Overvoltage category: CAT IV 600 V Test voltage: 6 kV AC voltage range alternating voltage: 120 - 200 - 300 - 350 - 400 - 450 - 500 - 550 - 600 - 650 - 700 - 750 - 800 850 - 900 - 950 - 1000 V 120 - 200 - 300 - 350 - 400 - 450 - 500 - 550 - 600 - 650 - 700 - 750 - 800 850 - 900 - 950 - 1000 V CAT III 1000 V DC voltage range direct voltage: 150.0999 12 V infrared and high frequency key tester 320 12-42 V detector for locating short circuits, cable breaks and leakage current • For the quick, easy and proper searching for short circuits, cable faults and leakage current without having to puncture wires • Saves a great deal of time, because removing interior lining, carpeting and trim on the vehicle can be reduced to the essentials • Short circuiting is eliminated • For tracking cable guides • For locating electrical components in the vehicle • For detecting broken circuits or cable breaks • For locating the cause of severe battery charge losses • For testing and detecting temporarily interrupted connections (“loose connections”) • The transmitter is connected to the circuit to be tested with the insulated crocodile clamps via the fuse box • The output signal is received by the receiver and indicated acoustically as well as through a directional LED • The error can be localised by following the line • If the receiver no longer receives a signal, the short circuit has been found • The transmitter can be optionally expanded to include headphones via the built-in port • Can be used for circuits from 12 V to 42 V • The detection sensitivity can be variably adjusted • Includes 2 x 9 V block battery • In plastic bag 550.1504 125,0 30 Polarity and voltage tester 3 - 48 V 117.4266 • Universal test device for the vehicle electrics and electronics to test the voltage and polarity • To troubleshoot electronic components and prevent damage caused by incorrectly coupled lines • Two light-emitting diodes indicate voltage as well as polarity • Test tip with push mechanics to tap into the cable • With shielded crocodile clamp • Test tip and reproducing stylus tip made of stainless steel 550.1503 140,0 70 Voltage test ball with protective insulation, double pole 50 - 1000 V 620 Electronic multifunctional tester 6 - 24 V with 5 metres of cable • Ideal standard lamp with many test functions • With replaceable probe for the optional expansion with commercially available inspection and test components • High speed functional testing without removal of components • Via toggle switches can be plus or minus given to the probe • Built in bi metal short circuit protection • No protection wear for troubleshooting • Version with replaceable probe and alligator clip • Immediate continuity test of switches, relays, diodes, fuses, wiring harnesses etc. • For the operation of electronic components, such as relays, fuel pumps, window motors, switches, lamps etc. • For determining poor ground connections • Immediate polarity determination via red/green LED display • Changing acoustic signals depending on the polarity • Power can be supplied immediately at the push of a button with the tester • Built-in bimetallic short circuit fuse (7.5 A), therefore no fuse wear during troubleshooting • Cable with shielded crocodile clamp and pole terminals • 5 metre cable length • Stainless steel probe Polarity and voltage tester with protective insulation 6 - 400 V • In accordance to DIN ISO 0680 • For the professional, multi-stage voltage and polarity test • Light-emitting diodes indicate voltage as well as polarity • For direct and alternating voltage • With rotating field and phase display • Shielded test tips • Stainless steel probe Technical data: Readout: light-emitting diodes/LE Power requirement: 140 mA Allowable duty cycle: 30 s Frequency range: 0 - 100 Hz Protection class: IP40 AC voltage range alternating voltage: 6 - 50 - 120 - 230 - 400 V DC voltage range direct voltage: 150.3075 2 pcs 200 12-42 V detector for locating short circuits, cable breaks and leakage current 400 550.1501 6 - 50 - 120 - 230 - 400 V 180 Technical data: Cable length: 5m Test probe diameter: 4 mm 150.1670 6 - 24 V DC 150.1671 500
528 Pages | Valid until 07/2024 | Previous page | Next page
Choose your language
Legal issues
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Request form for special products
The ToolTeam® Procurement Service
Are you looking for products that are shown in the catalogue but cannot be purchased directly online?Our procurement service will be pleased to make you a non-binding and individual offer.