GEDORE Automotive KLANN Main catalog General Repairs Page 273
Commercial customer offer**Products from catalog page
Injection System, Fiat KL-1683-10 K Injector Nozzle Puller Set, KL-1683-10 K Fiat/Opel/Vauxhall/Suzuki Suitable for use on Fiat, Opel/Vauxhall, Suzuki 1.3 Common Rail Diesel engines. (engine code: A13DTE, Z13 DT, etc.) This tool set enables the professional removal of very tight-fitting/seized injector nozzles without the need for removing the cylinder head from the vehicle. The removal of injector nozzles from this type of engines is particularly difficult due to the fact that always two injector nozzles are held by one retaining clip. This means, that when removing one of the injector nozzles, the second one needs to be pulled out at the same time. The injector nozzles can quickly and easily be removed using the special extraction bridge and the two pull spindles. Procedure for the removal of the injector nozzles: Unscrew injection nozzle heads with the special socket included in the set. Screw pull spindles into the injector nozzles, place pre-assembled extraction bridge onto the valve cover and screw on shoulder nuts. Pull out nozzles by evenly turning the shoulder nuts. By injecting compressed air into the combustion chamber impurities are prevented from entering the latter. Scope of Delivery: KL-1683-10 K Injector Nozzle Puller Set, Fiat/Opel/Vauxhall/Suzuki Part No. KL-1683-105 KL-0369-4505 A KL-0369-461 A KL-1383-118 KL-1683-103 KL-1683-1090 Description Extraction Bridge with Spindle Special Bit Insert, Size (waf)10mm Special Socket, Size (waf) 29mm, 1/2" drive Compressed Air Adaptor for Glow Plug Bore M8x1 Cleaning Tool for Injector Nozzle Seat Plastic Storage Case Qty 1 1 1 1 1 1 6 (Patented) KL-0186-110 Injector Nozzle Puller without Slide Hammer, for M14x1.5, VW / Fiat / IVECO KL-0186-110 Applicable to Fiat 2.8 JTD Diesel engines; e.g. Ducato, IVECO Daily and VW 2.0 TDI Common Rail engines (first and second generation) e.g. Golf 6, Tiguan, Touran (engine code CFFB) etc. This tool enables the professional removal of injection nozzles without having to open or dismantle them. The slide hammer KL-0369-4100 (1.5kg) or KL-0049-300 (4.8kg) is needed to operate the tool. An indispensable tool when changing a timing chain or removing the valve cover/ replacing the valve cover seal. The injector nozzle puller is fixed to the high-pressure fuel supply line bore (M14x1.5) on the injector with a special screw. Thanks to its particular design, the puller allows for optimum power transmission without the risk of damaging the valve cover or the injector nozzle. The stabilising screws enable the tool to be individually adjusted to the injector nozzle top part whilst, at the same time, ensuring the greatest possible stability of the injector nozzle puller. Scope of Delivery: KL-0186-110 Injector Nozzle Puller without Slide Hammer, for M14x1.5 Part No. KL-0186-1101 KL-0186-1102 Description Injector Nozzle Puller Base Body for M14x1.5 Special Screw, M14x1.5 Copyright GEDORE Automotive GmbH, Germany Qty 1 1 formerly (273) 6.4-28
580 Pages | Valid until 12/2025 | Previous page | Next page
Choose your language
Legal issues
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Request form for special products
The ToolTeam® Procurement Service
Are you looking for products that are shown in the catalogue but cannot be purchased directly online?Our procurement service will be pleased to make you a non-binding and individual offer.