GEDORE Automotive KLANN Main catalog General Repairs Page 120
Commercial customer offer**Products from catalog page
Axle Repairs Wheel Hubs KL-0045-7 Hydraulic Spindle (12t), M42x2 KL-0045-7 The KL-0045-7 is a hydraulic spindle with a maximum allowable force of 120kN (=12t) designed to fit a wide range of GEDORE Automotive tools. Scope of Delivery: KL-0045-7 Hydraulic Spindle (12t), M42x2 Part No. KL-0045-700 KL-0045-7009 KL-0045-7020 Description Hydraulic Spindle (12t, Base Tool), M42x2 Pressure Piece, short Pressure Piece, long Qty 1 1 1 3 KL-0040-2500 The base tool KL-0045-700 consist of a body made of high-grade steel, two internal pistons, cup seals and various screw joints. The spindle is operated via a pressure screw. If the hydraulic spindle KL-0045-7 is combined with tools of the KL-0174-Series, the adaptor KL-0174-552 (2¼"-14 UNS to M42x2) is additionally needed when the perforated puller plates size 2 and size 3 are used. Technical Data: Maximum admissible force: Maximum stroke: Thread of cylinder: Length without ‘T’ Handle: Weight: 120kN (12t) 16mm M42x2 240mm 2.3kg KL-0040-2500 Hydraulic Cylinder, 17t Thanks to its special design as a hollow piston cylinder, the KL-0040-2500 hydraulic cylinder (17t) can be used to perform pulling as well as pushing operations in conjunction with the corresponding spindles available as accessories. Technical Data: Range of Use: In conjunction with various GEDORE Automotive tools, the hydraulic cylinder (17t) KL-0040-2500 can be used for the removal and installation of drive shafts, wheel hubs, wheel bearings, silentblocs and suspension ball joints. Note: A hydraulic pump is needed to drive the hydraulic cylinder KL-0040-2500. For accessories such as coupling, hydraulic pump, pressure gauge etc., please refer to chapter 4 in this Catalogue). KL-0039-1930 Maximum admissible force: Maximum stroke: Maximum oil pressure: Maximum volume of oil: Piston area: Thread in hollow piston: Retaining thread (pushing side): Retaining thread (pulling side): Cylinder external diameter: Cylinder overall length (piston retracted): Cylinder overall length (piston extended): Hydraulic fluid connection thread: Weight: 170kN (17t) 45mm 700bar 122cm³ 27cm² M20 2¼“-14 UNS M42x2 80mm 202mm 247mm 3/8“ NPT 5.2kg KL-0039-1930 Pressure Spindle with O-Ring, M20x350 Technical Data: Pin Ø: Overall length: Maximum load capacity: KL-0039-1935 20mm 350mm 20t KL-0039-1935 Thrust Piece This tool is necessary for pressing out drive shafts. It is used in conjunction with the KL-0174-.. Puller Series, the KL-0040-2500 hydraulic cylinder and the KL-0039-1930 pressure spindle with pin Ø 20mm. KL-0174-856 KL-0174-856 Thrust Piece for Drive Shafts Designed to press out drive shafts. Used in conjunction with the tools of the KL-0174-.. Series and mechanical pressure spindles with a pin Ø of 14mm. 3.4-07 (120) Copyright GEDORE Automotive GmbH, Germany formerly
580 Pages | Valid until 12/2025 | Previous page | Next page
Choose your language
Legal issues
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Request form for special products
The ToolTeam® Procurement Service
Are you looking for products that are shown in the catalogue but cannot be purchased directly online?Our procurement service will be pleased to make you a non-binding and individual offer.