TOX product catalogue Page 83
Commercial customer offer**Top sellers from TOX-DÜBEL
Building materials & Holding values Liquix SOS C 20/25 Mz 12 HLz 12 Hbl 2 P2 ≥ 25 mm Wood 6/50 70 kg 60 kg - - 15 kg - - 8/50 80 kg 70 kg - - 30 kg - - 10/50 100 kg 90 kg 40 kg* 35 kg* 40 kg 35 kg* - The anchoring depth of the fastening must be observed Drilling method and drill hole cleaning must be adapted to the building material The recommended loads only apply to installation in the building material, not for installation in joints The specified curing time must be observed Approved wall plugs must be used for fixings where safety is of importance (see also www.tox.de/safety+loads) * with sieve sleeve Description & Area of Application Chemical / Heavy Duty For fixing light shelves, curtain rails, towel rails etc. For repairing torn-out hinges, holes drilled too large, wooden doors, etc. Fast reacting 2-component repair adhesive with very high strength Fast curing ensures rapid further processing (after 3-5 minutes) Suitable for indoor and outdoor use Processable from ≥ 10° C Processing & Installation For fastening: Clean drill hole 1. Clean drill hole 1. Torn out drill hole 2. Fill drill hole 2. Fill drill hole 3. Allow to cure 3. Allow to cure 4. Pre-drilling 4. Remove excess 4. Attach object 4. Attach object Always use a sieve sleeve for perforated and sheet building materials and cavity blocks Remove the sealing cap and put on the static mixer Discard the first 5 cm of the adhesive and do not use it for fastening Fill the drill hole completely with repair adhesive Approx. 5 minutes after filling the drill hole, screw the screw into the hardened compound. Pre-drill the core diameter of the screw for larger screw diameters Content of the cartridge (25 ml) is sufficient for min. 4 drill holes (at 10 mm diameter and 50 mm depth) Largely expansion pressure-free anchoring prevents damage to tiles and rendering When repairing: Torn out fittings, hinges or pieces of wood, - simply fill with Liquix SOS After curing, remove and grind off excess compound with a suitable tool (e.g. knife or drill) 83
216 Pages | Valid until 12/2023 | Previous page | Next page
Choose your language
Legal issues
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Request form for special products
The ToolTeam® Procurement Service
Are you looking for products that are shown in the catalogue but cannot be purchased directly online?Our procurement service will be pleased to make you a non-binding and individual offer.