TOX product catalogue Page 67
Commercial customer offer**Top sellers from TOX-DÜBEL
Building materials & Holding values To ETA-05/0139 Galvanised steel Stainless steel M6 x30 M8 x30 M10 x40 M12 x50 M16 x65 M6 x30 M8 x30 M10 x40 M12 x50 M16 x65 M20 x80 30 mm 30 mm 40 mm 50 mm 65 mm 30 mm 30 mm 40 mm 50 mm 65 mm 80 mm 330 kg 330 kg 510 kg 710 kg 1050 kg 390 kg 390 kg 610 kg 850 kg 1260 kg 1720 kg Screw 5.6 210 kg 390 kg 410 kg 900 kg 1680 kg Screw 5.8 290 kg 390 kg 410 kg 1210 kg 1800 kg Screw 8.8 290 kg 390 kg 410 kg 1230 kg 1800 kg 320 kg 460 kg 600 kg 1150 kg 1920 kg 3040 kg 160 mm Impact Effective anchoring depth Permissible tensile load Nzul (screw 5.6 to 8.8) uncracked concrete C20/25 Permissible shear load Vzul uncracked concrete C20/25 Screw stainless steel A4 minimum centre distance smin 55 mm 60 mm 100 mm 120 mm 150 mm 50 mm 80 mm 100 mm 120 mm 150 mm minimum edge distance cmin 95 mm 95 mm 135 mm 165 mm 200 mm 80 mm 95 mm 135 mm 165 mm 200 mm 260 mm Minimum component thickness hmin 100 mm 100 mm 120 mm 130 mm 160 mm 100 mm 100 mm 130 mm 140 mm 160 mm 250 mm Drill core diameter d0 8 mm 10 mm 12 mm 15 mm 20 mm 8 mm 10 mm 12 mm 15 mm 20 mm 25 mm Drill hole depth h1 ≥ 30 mm 30 mm 40 mm 50 mm 65 mm 30 mm 30 mm 40 mm 50 mm 65 mm 80 mm Through-hole in the attachment df ≤ 7 mm 9 mm 12 mm 14 mm 18 mm 7 mm 9 mm 12 mm 14 mm 18 mm 22 mm Torque when anchoring Tinst 4 Nm 8 Nm 15 Nm 35 Nm 60 Nm 4 Nm 8 Nm 15 Nm 35 Nm 60 Nm 120 Nm When sizing, the entire declarations of performance of the Impact must be observed The partial safety factors of the resistances and a partial safety factor of γF = 1.4 are to be considered Approved wall plugs must be used for fixings where safety is of importance (see also www.tox.de/safety+loads) Description & Area of Application Impact, galvanised: galvanised, internal thread with built-in expanding segment Impact, A4: stainless steel, internal thread with built-in expanding segment For flush fastenings All wall plugs can also be used with threaded rods From size ≥ M8 approved for sprinkler systems Impact Tool: Setting tool for professional, secure installation Processing & Installation The drill hole depth must be observed The screw length must be determined according to the minimum screw-in depth and the attachment thickness tfix 1. Drilling 4. Spread with setting tool 2. Clean drill hole 5. Screw in the screw The Impact is made of galvanised steel and must only be used in dry indoor areas The Impact A4 is made of stainless steel and may be used in dry indoor areas, wet areas, outdoor areas, including industrial atmospheres and close to the sea For use as multiple fixings of non-load-bearing systems in cracked and uncracked concrete For spacer installations in combination with threaded rods Pre-positioned installation 3. Drive in anchor The Impact Tool setting tool must be used for professional installation 67 Heavy Duty / Steel Component dimensions and installation characteristics
216 Pages | Valid until 12/2023 | Previous page | Next page
Choose your language
Legal issues
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Request form for special products
The ToolTeam® Procurement Service
Are you looking for products that are shown in the catalogue but cannot be purchased directly online?Our procurement service will be pleased to make you a non-binding and individual offer.