Ganter Norm Standard Parts - Catalogue Page 394
Commercial customer offer**Top sellers from Ganter Norm
GN 323.9 Disk Handwheels continued Installation sequence 1. Turn spindle into the starting position (0-position). 2. Set the length of the pallet pin and lock in place with hex nut. Make sure that the pin does not sit on the drill hole base after mounting the handwheel. 3. Turn the position indicator to the 0-position by turning the outer gear wheel to the 0-position. 4. Hold the (unmounted) handwheel such that the hole for the gear pinion is in the „12 o‘clock“ position and turn the crown wheel until the pallet pin is in the recess bore at the machine body. 5. Carefully insert the position indicator into the hand knob, making sure that the gear pinion engages in the crown wheel. The crown wheel may need to be readjusted slightly during this step. Secure the position indicator with the thumbscrew, avoiding excessive tightening torque to prevent the housing from deforming. 6. Place the handwheel onto the spindle and fix in place with the thumbscrew. 7. Check by turning the handwheel to ensure that the starting position of the spindle and the 0-position of both pointers coincide. If necessary, take out and readjust the position indicator. 1.4 Adjusting, Positioning, Locking with and without Position Indication | Page 393
2210 Pages | Valid until 12/2026 | Previous page | Next page
Choose your language
Legal issues
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Request form for special products
The ToolTeam® Procurement Service
Are you looking for products that are shown in the catalogue but cannot be purchased directly online?Our procurement service will be pleased to make you a non-binding and individual offer.