Ganter Norm Standard Parts - Catalogue Page 1622
Commercial customer offer**Top sellers from Ganter Norm
Function 3.1 GN 774 Breather Caps continued The overpressure inside the container ensures that the air volume flowing in or escaping owing to fluctuations of the oil level is kept to a minimum. This reduces filter fouling and substantially increases the useful filter life, especially in a dusty environment. Also, a container under pressure has a positive effect on the function of the pump and prevents foaming. 3.3 3.9 3.8 3.7 3.6 The valve seal ensures that no oil can spill to the outside, neither by excessive agitation in the tank nor during transport. 3.4 The air filter prevents the oil from being polluted from the outside (dust). The filter is made of PU foam with a filtration of 40 μm. 3.5 This is achieved by combining two valves (non-return / bypass valve). The inlet valve opens at a vacuum of 30 mbar or greater. The second valves opens at an overpressure > 350 / 700 mbar. 3.2 Breather caps GN 774 with double valve are normally used if the oil container is under pressure and if outside air has to flow back in to compensate for the vacuum caused by falling oil level. Pressure curve Δp [mbar] in the container as factor of the air flow rate [l/min.] at a valve opening pressure of 350 or 700 mbar. 3.5 Controlling, Venting, Sealing of Liquids and Gases | Page 1621
2210 Pages | Valid until 12/2026 | Previous page | Next page
Choose your language
Legal issues
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Request form for special products
The ToolTeam® Procurement Service
Are you looking for products that are shown in the catalogue but cannot be purchased directly online?Our procurement service will be pleased to make you a non-binding and individual offer.