Mahr - Product Catalog Page 310
Commercial customer offer**Products from catalog page
Millimar DP50 / DP20 Nozzle Through-Hole Pin FEATURES • Calibrated ID tooling for the Dimensionair® Air Gaging Systems • Tooling is interchangeable without adjusting system magnification. • Federal Air Plugs have large clearance (see table below), allowing easy entrance into the hole being measured and a greater measuring range. • Long life - wide clearance and hard chrome (optional) body extends life of the Air Plug. • Deep, recessed jets - Air jets are recessed into the plug body, protecting them from damage. • Large jet size eliminates clogging from dirt and oils. • Order information: Please always state when ordering: Transmission ratio of the display unit (e.g. 2500:1), the nominal size to be measured and the specified workpiece tolerance Application: Measurement of through holes TECHNICAL DATA Order no. Type Nominal value Model mm Nominal size in inches inch 2092945 DP50 2092946 Magnifica- Measuring Compatibility Clearance Minimum Including tion span bore length handle µm mm mm 3.124 – 3.553 .1230 – .1339” hardened steel 2500:1 25 Federal 0.015 4.75 DP50 3.556 – 4.696 .1400 – .1849” hardened steel 2500:1 38 Federal 0.027 4.75 2092947 DP50 4.699 – 6.312 .1850 – .2485” hardened steel 2500:1 51 Federal 0.03 4.75 2092948 DP50 6.314 – 9.484 .2486 – .3734” hardened steel 2500:1 76 Federal 0.045 6.35 2092949 DP50 9.487 – 12.494 .3735 – .4919” hardened steel 2500:1 76 Federal 0.045 6.35 2092950 DP50 12.497 – 13.688 .4920 – .5389” hardened steel 2500:1 76 Federal 0.045 6.35 2092951 DP50 13.691 – 14.933 .5390 – .5879 hardened steel 2500:1 76 Federal 0.045 6.35 2092952 DP50 14.935 – 20.978 .5880 – .8259” hardened steel 2500:1 76 Federal 0.045 6.35 2092953 DP50 20.980 – 28.699 .08260 – 1.1299” hardened steel 2500:1 76 Federal 0.045 6.35 2092954 DP50 28.702 – 37.691 1.1300 – 1.4839” hardened steel 2500:1 76 Federal 0.045 6.35 2092955 DP50 37.694 – 44.193 1.4840 – 1.7399 hardened steel 2500:1 76 Federal 0.045 6.35 2092956 DP50 44.196 – 63.751 1.7400 – 2.5099 hardened steel 2500:1 76 Federal 0.045 6.35 2092957 DP50 63.754 – 76.299 2.5100 – 3.0039” hardened steel 2500:1 76 Federal 0.045 6.35 2092958 DP50 76.302 – 89.151 3.0040 – 3.5099” hardened steel 2500:1 76 Federal 0.071 6.35 • 2092959 DP50 89.154 – 104.115 3.5100 – 4.0990” hardened steel 2500:1 76 Federal 0.071 6.35 • 104.117 – 114.300 4.0991 – 4.5000” • 2092960 DP50 hardened steel 2500:1 76 Federal 0.071 6.35 2092975 DP20 3.124 – 3.553 .1230 – .1339” hardened steel 5000:1 13 Federal 0.009 4.75 2092976 DP20 3.556 – 4.696 .1400 – .1849” hardened steel 5000:1 19 Federal 0.013 4.75 2092977 DP20 4.699 – 6.312 .1850 – .2485” hardened steel 5000:1 25 Federal 0.015 4.75 2092978 DP20 6.314 – 9.484 .2486 – .3734” hardened steel 5000:1 38 Federal 0.023 6.35 2092979 DP20 9.487 – 12.494 .3735 – .4919” hardened steel 5000:1 38 Federal 0.023 6.35 2092980 DP20 12.497 – 13.688 .4920 – .5389” hardened steel 5000:1 38 Federal 0.023 6.35 2092981 DP20 13.691 – 14.933 .5390 – .5879 hardened steel 5000:1 38 Federal 0.023 6.35 2092982 DP20 14.935 – 20.978 .5880 – .8259” hardened steel 5000:1 38 Federal 0.023 6.35 2092983 DP20 20.980 – 28.699 .08260 – 1.1299” hardened steel 5000:1 38 Federal 0.023 6.35 2092984 DP20 28.702 – 37.691 1.1300 – 1.4839” hardened steel 5000:1 38 Federal 0.023 6.35 2092985 DP20 37.694 – 44.193 1.4840 – 1.7399 hardened steel 5000:1 38 Federal 0.023 6.35 2092986 DP20 44.196 – 63.751 1.7400 – 2.5099 hardened steel 5000:1 38 Federal 0.023 6.35 2092987 DP20 63.754 – 76.299 2.5100 – 3.0039” hardened steel 5000:1 38 Federal 0.023 6.35 2092988 DP20 76.302 – 89.151 3.0040 – 3.5099” hardened steel 5000:1 38 Federal 0.071 6.35 • 2092989 DP20 89.154 – 104.115 3.5100 – 4.0990” hardened steel 5000:1 38 Federal 0.071 6.35 • 2092990 DP20 104.117 – 114.300 4.0991 – 4.5000” hardened steel 5000:1 38 Federal 0.071 6.35 • 306 Millimar | Electrical Length Measuring Instruments
708 Pages | Valid until 12/2023 | Previous page | Next page
Choose your language
Legal issues
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Request form for special products
The ToolTeam® Procurement Service
Are you looking for products that are shown in the catalogue but cannot be purchased directly online?Our procurement service will be pleased to make you a non-binding and individual offer.