HAAS - CATALOG 7.5 Page 364
Commercial customer offer**Top sellers from Otto Haas
SEALING MATERIAL "Pure graphite" with tanged sheet inlay Please note: • Only use new, undamaged and dry seals. • Carefully clean the sealing points without scratching them; dry the sealing points. • Centrally apply the seals, do not apply any greases, release agents or sealing compounds to seals or sealing points. • Do not use corroded screws, nuts or washers; calculated and actual surface pressure must be the same, so apply lubricants and nuts. • Install the second sealing point parallel to the plane and tighten the screws. • In order to achieve a uniform pressure distribution, the screwdriver can be "over cross" in at least 3 stages. For example: • All bolts must have the same required torque. • Each gasket will be sit down, especially in the case of a longer standing time; before initial start-up, retighten the screws to 100% of the torque. MEDIA RESISTANCE resistant Acetaldehyde Acetic acid 1st stage: 10% of required torque. 2nd stage: 50% of required torque. 3rd stage: 100% of required torque. Calcium hypochlorite, < 5%, boiling Diethylenglylol Acetylene Calcium hypochlorite, < 20%, Acetone Caprolactam Dimethylamine Acrolein Carbon disulphide Dimethylformamide Acrylic acid Carbon dioxide, Carbonic acid Dimethylsiloxane Adipic acid Carbon monoxide Engine oils Alcohols Carbon tetrachloride Epichlorhydrin Aldehydes Caustic potash solution Ester Air Caustic soda Ethane Amines Chloride Ethanol Ammonia, liquid Chromic acid, 50%, 23° C Ether Ammonia, gaseous Chlorine, liquid, dry Ethyl acetate Ammonia, aqueous solution Chloroform Ethyl alcohol Aniline Chlorinated paraffins Ethyl ether Animal fats and oils Chlorphenols Ethyl glycol Argon Chlorsilanes Ethylene, ethylene glycol Benzoic acid Cyanide Ethylene oxide Benzene Cyclohexane Exhaust air, exhaust Benzenesulfonic Cyclopentanol Fluorine Benzychlorid Color fleet alkaline Flue gas Bitumen Color fleet Formic acid 10% Blast furnace gas Color fleet sour Formaldehyde, aqueous solution Bleaching solution, < 5% boiling Condensate Freone, Frigene (FCKW, BrFCKW, FKW) Bleaching solution , < 20%, Cooking salt, aqueous solution Glycerin Boiler feed water Cooling water Glycols Brake fluids, glycol based Cresols Halons (FCKW, BrFCKW, FKW) Crude oil Halogenated hydrocarbons Butadiene Desalted water Heating oil Butane Dichlorbenzene Heat transfer oils Butanol Dichloroethane Hydraulic fluids, glycolbase Butyl acetate Dichloromethane Hydraulic fluids, mineral oil base Bromides, fluorides 23 °C up to non resistant Diesel fuel Butyric up to 100% conditionally resistant 23° C neutral Illustrations, dimensions and descriptions are not binding. We reserve the right to make technical changes! Diethyl ether solvent free Sealing material "Rein-Grafit" 14
373 Pages | Valid until 12/2024 | Previous page | Next page
Choose your language
Legal issues
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Request form for special products
The ToolTeam® Procurement Service
Are you looking for products that are shown in the catalogue but cannot be purchased directly online?Our procurement service will be pleased to make you a non-binding and individual offer.