ELMAG Discount News Page 92
Commercial customer offer**Top sellers from ELMAG
WELDING TECHNOLOGY TOUCH ME CPTX-I 400 2W & 500 2W – Water-cooled 16 1 2 15 14 10 11 8 9 6 7 12 5 3 4 13 CPTX-I 400 2W 1. Digital display and indicators: • Welding current A • Wire feed m / min • Time value sec 2. Digital display and indicators: • Welding voltage V • Correction value display +/• JOB no. 3. Parameter setting or display switching: A. m/min 4. Parameter setting or display switching: V, +/5. Display changeover (FUNCTION): IS (start current), IE (end crater current) or function menu button • F1-19 Selection of internal functions or fine settings such as: F1 Non-stick time, F2 Non-stick voltage, F3 Wire feed soft start, F6 Current rise time, F7 Current fall time, F10 Switching off the fan power saving function (fan run-on ~ 10 min, ON=fan continuous run), F11 JOB memory, F12 Soft arc mode (CO² SOLID), F13 Constant burn-in control, F15 Switch on start current INITIAL state (only in 4-cycle or 4-cycle repeat mode), F16 Gas pre-flow time, F17 Gas post-flow time, F18 Power saving time or pump run-on time (20-60 min.), F19 Switching off the pump power saving function (ON=pump continuous operation) 6. Shielding gas test button (GAS CHECK) 7. Wire insertion buttons (INCHING) 8. Welding process indicators: • CO² (100% CO²) • MAG (80% Ar / 20% CO²) • MIG (98% Ar / 2% O²) • DC STICK (MMA / Manual electronic) 9. Material indicators: • Solid steel wire (MILD STEEL SOLID) • Steel filler wire (MILD STEEL FLUX CORED) • Solid stainless steel wire (STAINLESS SOLID) • Stainless steel filler wire (STAINLESS CORED 10. Crater filling functions: • Crater filler / off (2-cycle) • Crater filler with start & end crater current (4-cycle)(start flow only if activated = F15) • Crater filler with end crater current repeat (4-cycle repeat) (start flow only if activated = F15) • Tacking function / spot welding function CPTX-I 400 2WCPTX-I 500 2W TECHNICAL INFO Remote control directly on the feeder for welding current (A) or JOBs (1-10) or welding voltage or voltage correction as well as wire feed 92 Liquid cooling hose pack A hose pack with liquid cooling provides optimum cooling of the welding torch even at maximum welding performance and duty cycle. Ideal for use in series production. 11. Wire thickness indicators: • 0.8 mm (CPTX-I 400 2W only) • 1.0 mm • 1.2 mm • 1.6 mm (CPTX-I 500 2W only) 12. Libo control (ARC CONTROL): • LIBO arc control hard -100 / +100 soft "Hard" LIBO for low current & for longer current feed- & returns and torch cables • "Soft" arc for high current 13. Synergy / Manual operation (SYN. / INDIV.): • If the SYNERG. LED is active – the welding voltage (V) is automatically adjusted to the set welding current (A, m / min.) • If the SYNERG. LED is inactive – the welding voltage (V) can be adjusted individually & independently of the welding current (A, m / min.) 14. ENTER: • Executes the administrative functions such as key lock, password & assignment of welding parameters to memory locations. Pressing more than 3 seconds activates the key lock to be adjusted 15. Save up to 30 JOBs (SAVE) 16. Loading JOBs (LOAD) Feed unit All CPTX-I models: > > > > Powerful wire feed motor Feed mechanism made of ALU Four drive rollers Two interchangeable feed rollers for different wire thicknesses CPTX-I 400 2W CPTX-I 500 2W Connections for hose pack with liquid cooling Coolant tank in the welding machine The currently valid prices can be found at www.elmag.eu/ordernumber
308 Pages | Valid until 12/2025 | Previous page | Next page
Choose your language
Legal issues
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Request form for special products
The ToolTeam® Procurement Service
Are you looking for products that are shown in the catalogue but cannot be purchased directly online?Our procurement service will be pleased to make you a non-binding and individual offer.