HEWI Catalog Sanitary Page 519
Commercial customer offer**Top sellers from HEWI
Niche, not right-angled niche width washbasin width W2 W1 minimum 3 minimum 3 hanger bolt fixing 140 140 340 / 475 ≠ 90° silicone joint minimum 3 mm 1. Measure the precise dimensions of the wall at the installation height of the washbasin after the wall surface has been finished. 2. Check the wall for unevenness. 3. If the niche angle is not 90°, line on site to form 90°. 4. Define the side washbasin projections W1 and W2 Attention: minimum dimension W1/W2 = 425 mm, maximum dimension W1/W2 = 1400 mm. Please note that a silicone joint of at least 3 mm will be required on each side. lining at site silicone joint minimum 3 mm lining at site Zeichnungsnr. HEWI Heinrich Wilke GmbH Prof.-Bier-Strasse 1-5 34454 Bad Arolsen Firma Telefon +49 5691 82 0 Telefax +49 5691 82 319 www.hewi.de Datum Name hanger bolt fixing 140 140 340 / 475 ≠ 90° minimum 3 W1 minimum 3 W2 washbasin width niche width Niche, not right-angled Datum HEWI Heinrich Wilke GmbH Prof.-Bier-Strasse 1-5 34454 Bad Arolsen niche width Telefon +49 5691 82 0 Telefax +49 5691 82 319 www.hewi.de washbasin width minimum 3 W1 minimum 3 W2 hanger bolt fixing 140 140 ≠ 90° 340 / 475 ≠ 90° 1. Measure the precise dimensions of the wall at the installation height of the washbasin and the installation depth (340 mm) after the wall surface has been finished. 2. Check the wall for unevenness. 3. If the niche angle is not 90°, line on site to form 90°. 4. Define the side washbasin projections W1 and W2 Attention: minimum dimension W1/W2 = 425 mm, maximum dimension W1/W2 = 1400 mm. Please note that a silicone joint of at least 3 mm will be required on each side. niche width lining at site Niche | Door lining Prof.-Bier-Strasse 1-5 34454 Bad Arolsen silicone joint minimum 3 mm +49 5691 82 0 +49 5691 82 319 lining at site hanger bolt fixing 140 340 / 475 140 minimum 3 W1 W2 washbasin width niche width minimum 3 1. Measure the precise dimensions of the wall at the installation height of the washbasin after the wall surface has been finished. 2. Check the wall for unevenness. 3. Check whether the niche angles are each 90°. If door lining cannot be removed for installation of the washbasin 4. Determine the niche width (taking into account doorframe) 5. Define the side washbasin projections W1 and W2 Attention: minimum dimension W1/W2 = 425 mm, maximum dimension W1/W2 = 1400 mm. Please note that a silicone joint of at least 3 mm will be required on each side. HEWI Sanitary | 515 Washbasins variable length | Washbasins
784 Pages | Valid until 12/2024 | Previous page | Next page
Choose your language
Legal issues
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Request form for special products
The ToolTeam® Procurement Service
Are you looking for products that are shown in the catalogue but cannot be purchased directly online?Our procurement service will be pleased to make you a non-binding and individual offer.