REMS main catalog tube processing Page 176
Commercial customer offer**Products from catalog page
REMS Curvo 22 V Cordless tube bender Universal, mobile cordless tool for cold bending of pipes up to 180°. Can be used anywhere, without vice. LiIon 22 V Technology. For battery and corded operation. Hard, halfhard, soft copper tubes also thinwall Ø 10 – 28 mm Ø ⅜ – 1⅛" Coated soft copper tubes, also thinwall Ø 10 – 18 mm Thickwalled copper pipes K65 for refrigeration and air conditioning technology EN 12735-1 Ø ⅜ – 1⅛" Pipes of press fitting systems made of stainless steel Ø 12 – 28 mm Carbon steel, also coated Ø 12 – 28 mm Soft precision steel tubes Ø 10 – 28 mm Steel pipes EN 10255 Ø ¼ – ¾" Electric conduit EN 50086 Ø 16 – 25 mm Multilayer composite tubes Ø 14 – 40 mm h 9,0 A 5,0 A REMS Curvo 22 V – wrinkle-free bending of pipes. Mobile, handy, light. Universal for many pipe types. Ready to use immediately without setting. Fast and creep speed with immediate stop for precise bending. Quick change of bending and back formers. Li-Ion 22 V, 5.0 Ah, 108 Wh battery, for approx. 90 pipe bends of the stainless steel Ø 22 mm press fitting systems with one battery charge*. Universal use h See page 172. System advantage See page 172. Cost advantage Bender cost recovered after a small number of bends. No costs for fittings, storage, procurement. Savings in soldering joints, pressing joints and working hours. Higher safety thanks to fewer pipe joints. German Quality Product Design Compact, mobile, handy cordless tool with integral absorbtion of torque during bending. Super light, drive machine with battery pack weights only 8.5 kg. Electronic charging status check with low discharge protection. Practical Dshaped handle with soft grip. Can be used anywhere, anytime. No setting. Simple, effortless, fast working, e.g. 90° bend Ø 22 mm only 6 s. Fast and creep speed with immediate stop for precise bending. Overbend, double bend, tier bend, reversed bend possible. Height adjustable machine support as accessory. Bending formers and back formers Form and pressure resistant, in highstrength, highslide, glassfibre reinforced polyamide. Optimum matching of bending former and back former guarantees materialcompatible gliding without cracks and creases. Angle scale 0 to 180° provided on each bending former and mark on the back former ensure precise bending. Rapid change of bending formers and back formers. Bending formers and back formers for different sizes, materials and bending radii (page 179). Drive Robust, maintenancefree gear. Final point safety in both directions through safety slipping clutch. Powerful battery motor 22 V, with large power reserve, 500 W output. Right and lefthand rotation. Stepless electronic safety switch for fast and creep speed, with immediate stop. Machine status check with overload protection of the drive unit against too high currents, with overheating protection by temperature monitoring, with electronic battery charging status check with charging level indication by a 2coloured green/red LED. Battery or mains operation REMS LiIon 22 V Technology, see page 20 – 25. Highly resistant LiIon 22 V battery with 4.4, 5.0 or 9.0 Ah capacity, for long service life. Light and powerful. LiIon 22 V, 4.4 Ah, 95 Wh battery, for approx. 79 pipe bends, 5.0 Ah, 108 Wh battery, for approx. 90 pipe bends, 9.0 Ah, 194 Wh for approx. 160 pipe bends of the stainless steel Ø 22 mm press fitting systems with one battery charge*. Graduated charging status check by coloured LEDs. Operating temperature range – 10 to + 60 °C. No memory effect for maximum battery power. Rapid charger 100 – 240 V, 90 W, 22 V or 290 W, 22 V, for shorter charging times, as accessory. Voltage supply 220 – 240 V, 22 V, 40 A output, for mains operation instead of LiIon battery 22 V, as accessory. Bending lubricant REMS bending spray ensures a permanent lubricating film for reducing energy expenditure and uniform bending. Highpressureproof, acidfree. CFCfree, so ozoneharmless. 176 Info
392 Pages | Valid until 12/2026 | Previous page | Next page
Choose your language
Legal issues
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Request form for special products
The ToolTeam® Procurement Service
Are you looking for products that are shown in the catalogue but cannot be purchased directly online?Our procurement service will be pleased to make you a non-binding and individual offer.