KIPP Clamping Tools Page 238
Commercial customer offer**Top sellers from KIPP
K1184 Collets for internal clamping Traction cone 1. Mounting collet: - Insert an O-ring into the groove on the top face of the clamp base. - Set a collet on the base making sure the locating pins fit into the locating holes on the undeside of the collet. Secure the collet using a tapered screw. Collet O-ring (included) Note: Before mounting the collet, ensure the cam cylinder is fully loosened by turning the tightening screw clockwise until it stops. locating pin Adaptor clamping screw 2. Machining collet: 2.1 Fully loosen the cam cylinder and measure the OD of the collet. Tighten the cam cylinder until the collet OD has expanded by 0.15 mm. max. machinable depth 2.2 Machine the contour of the part that is to be held into the collet. Performance curve workpiece K1184.2120 K1184.2160 10 Clamping force (kN) 3. Mounting workpiece: - Loosen the cam cylinder and remove the clamp ring. - Place the workpiece in the contour and re-tighten the cam cylinder. 8 K1184.2090 6 K1184.2065 4 2 0 5 10 15 20 25 30 35 40 Tightening torque (Nm) To avoid damaging the collet do not tighten the clamp without a workpiece or clamp ring. Observe the maximum tightening torque in the table. 239
466 Pages | Valid until 12/2022 | Previous page | Next page
Choose your language
Legal issues
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Request form for special products
The ToolTeam® Procurement Service
Are you looking for products that are shown in the catalogue but cannot be purchased directly online?Our procurement service will be pleased to make you a non-binding and individual offer.