FEIN Catalogue Power Tools Page 28
Commercial customer offer**Top sellers from Fein
1 coMPact KBc 36 MagForce (230 V) Extremely small and light single-speed compact magnetic core drill with minimum dimensions for use in tight spaces in the workshop and on the construction site. Input W 1 200 Output W 680 Speed, full load rpm 130 - 610 Speed, no load rpm 130 - 660 Carbide core drill bit max. Ø mm 36 HSS core drill max. Ø mm 36 Core drill, drilling depth max. mm 35 Twist drill max. Ø mm 16 SUPPlied Tapping 1 x 1/2" ratchet, 1 x 1/2" socket wrench extension, 1 x coolant pump, 1 lashing strap, 1 swarf hook, 1 x 82 mm centring pin, 1 contact guard, 1 additional handle, 1 x 5 mm hexagon socket wrench, 1 x 5 mm hexagon socket wrench with T-handle, 1 plastic tool case (L-BOXX 238) Countersinking max. Ø For accessories, see page 28 KBc 36 MagForce StrUctUral Steel-Set 3/4" Weldon / HSS noVa 25 M 12 mm Core drill holder 3/4" Weldon Width across corners mm 40 Height mm 169 Length mm 290 Stroke mm 46 Magnetic holding power N 10,000 Magnetic foot dimensions mm 175 x 80 Cable with plug m 3 Weight according to EPTA kg 8,50 Part number 7 273 23 62 00 0 EAN 4014586897356 1 magnetic core drill, 1 x 1/2" ratchet, 1 x 1/2" socket wrench extension, 1 x coolant pump, 1 lashing strap, 1 swarf hook, 1 x 82 mm centring pin, 1 contact guard, 1 additional handle, 1 x 5 mm hexagon socket wrench, 1 x 5 mm hexagon socket wrench with T-handle, 1 plastic tool case (L-BOXX 238), HSS twist drills, 35 mm cutting depth (3 each of diameter 10 mm and 12 mm), HSS NOVA 25 core drill bits, 25 mm cutting depth (3 each of diameter 14 / 16 / 18 / 20 / 22 mm), 2 x 82 mm centring pin, 1 cutting paste, 1 L-BOXX 136 for accessories For accessories, see page 28 26 + Extremely small and light for working in tight and difficult-to-reach spots – including vertically and overhead – thanks to height of 169 mm, a length of 290 mm and a weight of 8.5 kg. + Extremely low wear and long-life tool design with spindle sleeve feed without clearance for accurate drilling results in tough use in industry and manual trades. + Very powerful and maintenance-free brushless 1200 W high-power motor with high speed stability for continuously fast work progress as well as forward / reverse running and electronic speed setting for all drilling applications, such as core drilling, twist drilling and tapping and countersinking. + High gearbox positioning for optimum view of the drilling point. + Large installation space under the drill spindle with a stroke range of 46 mm. + Space-saving operation on both sides with ratchet. + Combined drive shaft, 1/2" square and 8 mm hexagon socket. + Intuitive operating concept avoids mix-ups and can be clearly seen by the user. + Convenient magnetic holding force display. + Tilt sensor stops the drill motor when the tool slips or tilts. + Integrated handle. + Speed saving “memory function”. + Slot for 5 mm hexagon socket wrench on the tool itself. + Internal cooling lubrication by means of hand pump. + Personal safety switch. + Ideally equipped for every job. Mobile working with the L-BOXX system. The smallest core drill in the world with forward and reverse running coupled with a large number of HSS NOVA 25 core drilling accessories. Perfect for steel and bridge construction. Input W 1 200 Output W 680 Speed, full load rpm 130 - 610 Speed, no load rpm 130 - 660 Carbide core drill bit max. Ø mm 36 HSS core drill max. Ø mm 36 Core drill, drilling depth max. mm 35 Twist drill max. Ø mm 16 Tapping SUPPlied 32 Fein BeneFitS Countersinking max. Ø M 12 mm Core drill holder 32 3/4" Weldon Width across corners mm 40 Height mm 169 Length mm 290 Stroke mm 46 Magnetic holding power N 10,000 Magnetic foot dimensions mm 175 x 80 Cable with plug m 3 Weight according to EPTA kg 8,50 Part number 7 273 23 64 00 0 EAN 4014586897462 Fein BeneFitS + Extremely small and light for working in tight and difficult-to-reach spots – including vertically and overhead – thanks to height of 169 mm, a length of 290 mm and a weight of 8.5 kg. + Extremely low wear and long-life tool design with spindle sleeve feed without clearance for accurate drilling results in tough use in industry and manual trades. + Very powerful and maintenance-free brushless 1200 W high-power motor with high speed stability for continuously fast work progress as well as forward / reverse running and electronic speed setting for all drilling applications, such as core drilling, twist drilling and tapping and countersinking. HSS noVa 25 core drill bit: Long service life and particularly resistant to shock and impact: thanks to its tough cutting edges and outstanding HSS steel with a hardness of 64 HRC, the core drill bit is perfectly designed for tough use in steel construction and installation work. l-BoXX system: Keep things stowed clearly, tidily and safely. Thanks to the tray for small parts, there is room for all accessories and the L-BOXXs can also be joined together and stacked with ease.
356 Pages | Valid until 12/2024 | Previous page | Next page
Choose your language
Legal issues
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Request form for special products
The ToolTeam® Procurement Service
Are you looking for products that are shown in the catalogue but cannot be purchased directly online?Our procurement service will be pleased to make you a non-binding and individual offer.