zoom_in
zoom_out
fullscreen
AMF pull-down clamping element No. 6489 13-60 375683
Sku: T-296574
Discontinued item
doneWeight (g): 2150g
doneC (mm): 10,5
doneC (mm): 10,5
doneD [mm]: 80
doned1 (mm): 100
doned1 (mm): 100
AMF - ANDREAS MAIER GmbH & Co. KG pull-down clamping element No.6489 13-60 375683
Product data
Manufacturer:
AMF - Andreas Maier GmbH & Co.KG Schloss- u. Werkzeugfabrik
Condition:
NEW
Sku:
T-296574
SKU manufacturer:
375683
GTIN Code (EAN):
4020772375683
Weight:
2,15 Kg
All information relating to products from AMF - Andreas Maier GmbH & Co.KG Schloss- u. Werkzeugfabrik. Technical and optical modifications of the manufacturer and errors reserved.
This page has been machine-translated, the original german version can be found here, please also note the Translation Disclaimer.
Product description
Mechanical pull-down clamping element, off-center, tempering steel, plasma nitrided.
- Application:
- Use on workpieces with existing or subsequently added holes.
- Once the clamping segments have engaged in the holes, safe 5-sided machining is possible without any problems.
- A hexagon socket wrench no. 916Q (SW 10) must be used to operate the element.
- The existing clamping edge is used to attach the pull-down clamping element to the machine table.
- There are two positioning holes on the underside for positioning on a device (pin ISO 8734 - 8 mm).
Note:
- Please consult us when clamping hardened workpieces or workpieces made of GG / GGG.
- The radial force must be observed!
- The lateral force when placing the workpiece must not exceed the lateral force value in the table.
- The clamping claws for machine vices (No. 6325 Order No.: 74682, 373878) can be used to clamp onto the machine table.
Advantage:
- All components are plasma nitrided and therefore have very good wear and corrosion resistance.
- Two-part clamping segments are externally toothed.
- Can be used flexibly due to easy handling and clamping onto the machine table.
On request:
Other sizes and special designs without pull-down and as support elements.
Additional information
Weight (g):
2150g
C (mm):
10,5
D [mm]:
80
d1 (mm):
100
d2 (mm):
12,6
K (mm):
12,9-13,8mm
Tensile force vertical (kN):
5kN
Tightening torque Md (Nm):
18Nm
Side balance per jaw (mm):
±0,25mm
Tensile edge thickness at Al-LEG. min. (mm):
9mm
Thrust force horizontal (kN):
3,0kN
Radial force Tension sleeve (kN):
27kN
Spread travel (mm):
1,5mm
Piston diameter (mm):
22mm
Lateral force unladen (N):
130N
Related results
4020772375683
power clamps
clamping irons
clamping pads
straightening and support elements
clamping bolts and floating clamps
clamping screws
nuts and washers
clamping sets and accessories
pull-down clamps
positioning elements
stops and precision T-nuts
eccentric and centering clamps
AMF
375683
AMF - ANDREAS MAIER GmbH & Co. KG
Complete catalogs
The offer is aimed exclusively at business customers, companies, public institutions, tradesmen and freelancers. All prices in catalogues are exclusive of VAT, shipping costs and surcharges if applicable.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Matching catalog
Commercial customer offer**
Product suggestions
-25%
Parallel support set No.6348S 125 Standard
371104
€566.13
€753.99 MSRP
-9%
Kugeldruckschraube 7600SE-22 M12 mit Außen 6kt. Ausführung: Vergütungsstahl, brüniert
571088
€21.81
-17%
Vertical clamp No.6804 size 3 horizontal foot
90431
€34.08
€41.22 MSRP
Verlängerungsmutter Nr. 6334 M10 SW 16mm AMF
82271
€3.07
-22%
6848HNIJ-3 Horizontal locking clamp with orange handle
557447
€72.48
€93.49 MSRP
-23%
Angled screwdriver 6KT SW2.5mm in burnished tone CV. Front edges chamfered
42374
€0.42
€0.55 MSRP
-11%
Fixing attachment No.6443 14mm
72751
€39.29
T-slot nut (DIN 508) Factory standard T-slot 22mm M16 AMF
155630
€11.60
-11%
TWINNUT nut No.6333S M12 without collar
381806
€55.21
-21%
7630T support element 3-stage 43 kN M16x18
559930
€273.53
€345.00 MSRP
-8%
6809H-4 handle
91363
€2.39
-19%
Crocodile clamp 6312VS-21 M20 complete with DIN6379 and 6312S
375832
€159.37
€197.48 MSRP
-5%
Horizontal clamp no. 6833 size 1 angled foot AMF
93179
€28.45
-19%
Deep clamping jaws 6490 for T-slot 14 Bulle
72967
€118.99
(€70.80 / Piece)
€147.48 MSRP
-16%
Hook wrench with nose for nuts 95-100mm in burnished tone L.280mm
54692
€16.85
No Review yet
Description: No Review yet
Written by: No Review
Rating: 5 out of 5
5 stars, based on 1
reviews
AMF pull-down clamping element No. 6489 13-60 375683
4020772375683
power clamps
clamping irons
clamping pads
straightening and support elements
clamping bolts and floating clamps
clamping screws
nuts and washers
clamping sets and accessories
pull-down clamps
positioning elements
stops and precision T-nuts
eccentric and centering clamps
AMF
375683
AMF - ANDREAS MAIER GmbH & Co. KG
Mechanical pull-down clamping element, off-center, tempering steel, plasma nitrided.
T-296574
375683
4020772375683
en
["de","en","it","nl","nl","fr","es","pl","pt","cs","da","sv"]
https://www.toolteam.com/en-GB/amf-pull-down-clamping-element-no-6489-13-60-375683-t-296574-4020772375683?dc=GB&cu=EUR
2026-09-25
1563.52
United Kingdom
GB
DE
14