Rothoblaas - X-RAD Seite 54
Gewerbekunden Angebot**Topseller von RothoBlaas Deutschland
zzgl. Versand
zzgl. Versand
zzgl. Versand
zzgl. Versand
zzgl. Versand
zzgl. Versand
zzgl. Versand
zzgl. Versand
zzgl. Versand
zzgl. Versand
zzgl. Versand
zzgl. Versand
zzgl. Versand
zzgl. Versand
zzgl. Versand
zzgl. Versand
zzgl. Versand
zzgl. Versand
zzgl. Versand
zzgl. Versand
zzgl. Versand
zzgl. Versand
zzgl. Versand
zzgl. Versand
zzgl. Versand
zzgl. Versand
zzgl. Versand
zzgl. Versand
zzgl. Versand
zzgl. Versand
zzgl. Versand
zzgl. Versand
zzgl. Versand
zzgl. Versand
zzgl. Versand
zzgl. Versand
X-ONE X-PLATE X-SEAL DESIGN RESISTANCES - X-ONE / X-PLATE GROUND ATTACHMENT FXPLATE α α = 0° α = 0° α FXONE X-PLATE BMINI / BMINIL / BMINIR STRESS F Rd XONE Rd,XONE [kN] 89.3 112.8 89.3 77.6 140.4 α [°] 0° 45° 90° 135° 180° Rd XPLATE BMINI UNCRACKED CONCRETE chemical anchor No. - Ø x L [mm] 6 - M20 x 250 cl. 8.8 hef = 200 mm Rd,XPLATE [kN] 132.4 140.8 131.1 109.1 142.5 Rd XPLATE BMINIL / BMINIR CRACKED CONCRETE chemical anchor No. - Ø x L [mm] 6 - M20 x 250 cl. 8.8 hef = 200 mm UNCRACKED CONCRETE Rd,XPLATE [kN] 132.4 116.0 114.0 109.1 142.5 chemical anchor No. - Ø x L [mm] 3 - M20 x 250 cl. 8.8 hef = 200 mm CRACKED CONCRETE Rd,XPLATE [kN] 123.0 65.8 51.5 62.9 116.0 chemical anchor No. - Ø x L [mm] 3 - M20 x 400 cl. 8.8 hef = 350 mm Rd,XPLATE [kN] 123.0 73.5 60.0 71.4 122,0 X-PLATE BMAXI / BMAXIL / BMAXIR STRESS F Rd XONE Rd,XONE [kN] 89.3 112.8 89.3 77.6 140.4 α [°] 0° 45° 90° 135° 180° Rd XPLATE BMAXI UNCRACKED CONCRETE chemical anchor No. - Ø x L [mm] 6 - M20 x 250 cl. 8.8 hef = 200 mm Rd,XPLATE [kN] 132.4 140.8 131.1 109.1 142.5 Rd XPLATE BMAXIL / BMAXIR CRACKED CONCRETE chemical anchor No. - Ø x L [mm] 6 - M20 x 250 cl. 8.8 hef = 200 mm UNCRACKED CONCRETE Rd,XPLATE [kN] 132.4 114.6 116.0 109.1 142.5 chemical anchor No. - Ø x L [mm] 3 - M20 x 250 cl. 8.8 hef = 200 mm CRACKED CONCRETE Rd,XPLATE [kN] 96.0 67.9 54.0 60.8 94.0 chemical anchor No. - Ø x L [mm] 3 - M20 x 400 cl. 8.8 hef = 350 mm Rd,XPLATE [kN] 96.0 75.2 59.0 65.1 96.0 ANCHOR INSTALLATION PARAMETERS Tinst hef L hmin ANCHOR TYPE type d x L [mm] vinyl ester chemical M20 x 250 code 521431 M20 x 400 rod code steel strength grade MGS12088 (1) 8.8 d0 [mm] 24 24 hef [mm] 200 350 hmin [mm] 250 400 Tinst [Nm] 120 120 resin quantity [ml/rod] 60 100 (1) Rods 1000 mm long to be cut to size and used with a MUT nut and ULS washer (page 43). d d0 GENERAL PRINCIPLES: • The design values are in compliance with EN 1995:2014 in compliance with ETA-15/0632, in compliance with EN1993-1-8 and in compliance with the product certificates. • The total resistance of the connection is obtained as follows: 52 X-PLATE • During calculation a C24 strength class for the CLT panel plates and a C25/30 strength class for the concrete were considered. There must be no annular space between the holes in the plate and the anchor (holes filled). • Dimensioning and verification of the wooden and concrete elements must be done separately. • Concrete strength values are valid for the calculation assumptions defined in the table; conditions with different contour conditions (e.g. minimum distances from the edges) must be checked.
84 Seiten | Gültig bis 04/2024 | Vorherige Seite | Nächste Seite
Sprache wählen
Rechtliches
Ausschließlich verantwortlich für Inhalt, Preis- und Artikelangaben der dargestellten Produkte und Angebote innerhalb der Kataloge ist der Hersteller. Technische und optische Änderungen des Herstellers und Irrtümer vorbehalten.
Anfrageformular für spezielle Produkte
Der ToolTeam® Beschaffungsservice
Sie suchen Produkte die im Katalog abgebildet, aber online nicht direkt kaufbar sind?Unser Beschaffungs-Service macht Ihnen gerne ein unverbindliches und individuelles Angebot.
