Rothoblaas - Plates and Connectors Seite 144
Gewerbekunden Angebot**Topseller von RothoBlaas Deutschland
zzgl. Versand
zzgl. Versand
zzgl. Versand
zzgl. Versand
zzgl. Versand
zzgl. Versand
zzgl. Versand
zzgl. Versand
zzgl. Versand
zzgl. Versand
zzgl. Versand
zzgl. Versand
zzgl. Versand
zzgl. Versand
zzgl. Versand
zzgl. Versand
zzgl. Versand
zzgl. Versand
zzgl. Versand
zzgl. Versand
zzgl. Versand
zzgl. Versand
zzgl. Versand
zzgl. Versand
zzgl. Versand
zzgl. Versand
zzgl. Versand
zzgl. Versand
zzgl. Versand
zzgl. Versand
zzgl. Versand
zzgl. Versand
zzgl. Versand
zzgl. Versand
zzgl. Versand
zzgl. Versand
DIFFUSE AND CONCENTRATED JOINTS FORCE TRANSFER MODE Joints with cylindrical shank connectors transmit the load through high and very localised shear forces: these are transmitted in the structural elements in an uneven manner, stressing a limited volume of timber (demonstrated by the blue areas in the adjacent diagram) . Joint with cylindrical shank connectors . XEPOX epoxy adhesive and SHARP METAL technology allow to spread the load over a very wide area compared to that involved by a cylindrical shank connector . This results in a more homogeneous and less severe stress on the wood component . Joint glued with XEPOX . Joint with SHARP METAL . SCALE FACTORS Cylindrical shank connections typically have diameters between 4 and 20 mm and are loaded with forces proportional to this dimension . Since the force is concentrated, when using these connectors it is necessary to respect the minimum distances and spacing, in order to avoid fragile failures along the stressed wood fibre . In addition, when using connectors with a large diameter, there is a considerable weakening of the net cross-section of the timber elements at the drill holes . The mechanical engagement of the SHARP METAL hooked surface and the pull-through into the timber structure of the XEPOX adhesive allow a load distribution over the whole connected timber area, avoiding splitting and weakening of the cross-section . 144 | DIFFUSE AND CONCENTRATED JOINTS | EPOXY ADHESIVES AND HOOKED PLATES
576 Seiten | Gültig bis 04/2024 | Vorherige Seite | Nächste Seite
Sprache wählen
Rechtliches
Ausschließlich verantwortlich für Inhalt, Preis- und Artikelangaben der dargestellten Produkte und Angebote innerhalb der Kataloge ist der Hersteller. Technische und optische Änderungen des Herstellers und Irrtümer vorbehalten.
Anfrageformular für spezielle Produkte
Der ToolTeam® Beschaffungsservice
Sie suchen Produkte die im Katalog abgebildet, aber online nicht direkt kaufbar sind?Unser Beschaffungs-Service macht Ihnen gerne ein unverbindliches und individuelles Angebot.
