Treston Hauptkatalog Seite 19
Gewerbekunden Angebot**Produkte der Katalogseite
zzgl. Versand
zzgl. Versand
zzgl. Versand
zzgl. Versand
zzgl. Versand
zzgl. Versand
zzgl. Versand
Unsere internen Standards entsprechen den strengsten Zertifizierungsnormen MANAGEMENT SYSTEM CERTIFICATE Certificate no.: C597451 Initial certification date: 15 November 2023 Valid: 15 November 2023 CERTIFICATE MANAGEMENT SYSTEM CERTIFICATE – 14 November 2026 Certificate no.: C597452 Initial certification date: 15 November 2023 Valid: 15 November 2023 replacing/ersetzt: GS/20/HEL/00587 GZ-CERT221003034-01 GZES221001911601 Issue date / ausgestellt: Invalid from / ungültig ab: 2022-11-22 2027-11-22 License Holder / Genehmigungsinhaber: Stera Technologies Oy Tierankatu 5 A, FI-20520, Turku, Finland Manufacturing Plant(s) / Fertigungsstätte(n): Stera Technologies Oy Tierankatu 5 A, FI-20520, Turku, Finland This is to certify that the management system of This is to certify that the management system of Treston Oy GS/22/HEL/01702 ZERTIFIKAT Order no. / Auftragsnr.: Test report ref. / Prüfbericht-Nr.: – 14 November 2026 Certified Product / Zertifiziertes Produkt: Sorakatu 1, 20730 Turku, Finland Treston Oy and the sites as mentioned in the appendix accompanying this certificate Sorakatu 1, 20730 Turku, Finland Product / Produkt: Wall- and Ceiling Lamp / Wand- und Deckenleuchte and the sites as mentioned in the appendix accompanying this certificate Type/Model No. / Typ/Modell-Nr.: TNL1200P, TNL1200, TNL900, TNL500W Trademarks / Markenzeichen: has been found to conform to the Quality Management System standard: ISO 9001:2015 has been found to conform to the Environmental Management System standard: Characteristics / Technische Daten: 220 V-240V; 50 Hz / 60 Hz; Class I / Schutzklasse I; IP20; ta 50 °C; TNL1200P, TNL1200: 56 W TNL900: 42 W TNL500W: 14 W Tested according to / Geprüft nach: EN IEC 60598-2-1:2021 EN IEC 60598-1:2021 AfPS GS 2019:01 PAK ISO 14001:2015 This certificate is valid for the following scope: Design, production, sales and marketing of workstations and material handling systems for industry and other technical environments and storage systems. This certificate is valid for the following scope: Design, production, sales and marketing of workstations and material handling systems for industry and other technical environments and storage systems. The product fulfils the requirements of the German Product Safety Act to ensure safety and health (§ 21 (1) ProdSG). The license holder is authorized to mark the described product with the GS mark as shown above. Marking requirements of § 6 (1) ProdSG have to be observed when making the certified products available on the market. Das Produkt entspricht den Anforderungen des Produktsicherheitsgesetzes hinsichtlich der Gewährleistung von Sicherheit und Gesundheit (§ 21 (1) ProdSG). Der Genehmigungsinhaber ist berechtigt, das beschriebene Produkt mit dem GS-Zeichen in der oben abgebildeten Form zu kennzeichnen. Bei Bereitstellung auf dem Markt sind die Kennzeichnungspflichten gemäss § 6 (1) ProdSG einzuhalten. Remarks / Bemerkungen: RG1; Non-user replaceable LEDs / nicht- Benutzer auswechselbare LED SGS Fimko Ltd Signature Peter Fagerstedt Certification Manager The test mark regulation is an integral part of this certificate. Die Zertifizierbestimmungen sind integraler Bestandteil des Zertifikates. Place and date: Espoo, 15 November 2023 For the issuing office: DNV - Business Assurance Keilaranta 1, 02150 Espoo, Finland Page 1 of 1 For the issuing office: DNV - Business Assurance Keilaranta 1, 02150 Espoo, Finland This document is issued by the Company under its General Conditions of Service accessible at http://www.sgs.com/terms_and_conditions.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Kimmo Haarala Management Representative Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Place and date: Espoo, 15 November 2023 Kimmo Haarala Management Representative Lack of fulfilment of conditions as set out in the Certification Agreement may render this Certificate invalid. Certification Body for products / Zertifizierstelle für Produkte ACCREDITED UNIT: DNV Business Assurance Finland Oy Ab, Keilaranta 1, 02150 Espoo, Finland - TEL: +358 10 292 4200. www.dnv.fi/assurance Lack of fulfilment of conditions as set out in the Certification Agreement may render this Certificate invalid. Qualitätszertifizierung Zertifizierung des Umweltmanagementsystems ISO 9001 : 2015 ISO 14001 : 2015 Certificate of Qualification Q514/2017 V1.1 1/1 Certificate of Qualification Q515-1/2017 V1.1 15.3.2017 15.3.2017 Certificate of Qualification Certificate of Qualification Cleanroom Suitability of Treston Concept and WB Workstations Cleanroom Suitability of Chair The cleanroom suitability of Treston Concept and WB workstations was assessed in the cleanroom of ISO 14644-1 class 7, February 2017. The requirements of ISO class 7 were met at rest and in operation. Summary of the qualification is shown in Table 1. Detailed information is presented in a technical report C514/2017. Certificate of Qualification Q518/2017 V1.0 1/1 Treston Oy, Sorakatu 1, 20730 Turku Kimmo Lehti, +358 50 395 8562, [email protected] Dates of Test February 9 – 16, 2017 Certificate of Qualification ESD control items – Workstations Treston Concept and WB Treston Ergo C20PU-ESD ESD-control characteristics of Treston Concept and WB workstations were assessed in accordance with IEC 61340-5-1 and IEC 61340-2-3. Summary of the qualification is shown in Table 1. Detailed information is presented in a technical report C518/2017. The cleanroom suitability of Treston Ergo C20PU-ESD chair was assessed in the cleanroom of ISO 14644-1 class 7, February 2017. The requirements of ISO class 7 were met at rest and in operation. Summary of the qualification is shown in Table 1. Detailed information is presented in a technical report C515/2017. Client Contact Table 1: General Information Client Contact March 12 - 17, 2017 ( C518/2017) Cascade Metrology, Electrostatics Laboratory, Hakulintie 32, 08500 Lohja GSM +358 4456 88 599 Conditioning 48 hours, RH = (12 ± 3) %, T = (23 ± 2) °C February 26 Cascade Metrology, Electrostatics Laboratory, Hakulintie 32, 08500 Lohja GSM +358 4456 88 599 Samples under Test Conditioning ISO Class 7, RH = (25 ± 5) %, T = (23 ± 3) °C Sample 1: Concept motorized ESD workstation 10349015P+TT10060-ESD with accessories, SN 5219, 01/2017 Sample 2: WB811 EL ESD motorized workstation with accessories SN 7154, 01/2017 Samples under Test Treston Ergo C20PU-ESD Chair, 20015654, 9651C, 2401978/002, 02.09.2016 Test Equipment BMM2000ESD Sn /1387, HM41 Sn M1850876, Cylindrical electrode Vermason 222008, Concentric ring electrode Vermason 222002 Test Equipment Particle counter Climet Cl 500 SN 956475, Temperature and humidity meter Vaisala HM 41 SN M1850876, Sensor Vaisala HMP 113 SN M1750872 Test Method(s) EN ISO 14644-1:2015 Cleanrooms and associated controlled environments - Part 1: Classification of air cleanliness by particle concentration IEC 61340-2-3:2016, Edition 2.0, Electrostatics – Part 2-3: Methods of test for determining resistance and resistivity of solid materials used to avoid electrostatic charge accumulation Assessment Criteria Assessment Criteria IEC 61340-5-1:2016, Edition 2.0, Electrostatics – Part 5-1: Protection of electronic devices from electrostatic phenomena Summary of Results Requirements of ISO class 7 were met at rest and in operation. The requirements of ISO class 6 were also met at rest with the large particle sizes > 0.5 µm. Summary of Results The samples met the requirements of working surfaces according to IEC 61340-5-1. Resistance to groundable point and point to point resistances were below 1 × 109 Ω. Results and observations are presented in a technical report C518/2017. Note This certificate may only be reproduced in full, except with the prior written permission by issuing laboratory. The results relate only to the tested items. ISO Class 7, RH = (25 ± 5) %, T = (23 ± 3) °C Samples under Test Sample 1: Concept motorized ESD workstation 10349015P+TT10060-ESD with accessories, SN 5219, 01/2017 Sample 2: WB811 EL ESD motorized workstation with accessories SN 7154, 01/2017 Test Equipment Particle counter Climet Cl 500 SN 956475, Temperature and humidity meter Vaisala HM 41 SN M1850876, Sensor Vaisala HMP 113 SN M1750872 Assessment Criteria EN ISO 14644-1:2015 Cleanrooms and associated controlled environments - Part 1: Classification of air cleanliness by particle concentration Summary of Results Requirements of ISO class 7 were met at rest and in operation. The requirements of ISO class 6 were also met at rest with the large particle sizes > 0.5 µm. This certificate may only be reproduced in full, except with the prior written permission by issuing laboratory. The results relate only to the tested items. Note Note Date and place – March 1 , 2017 This certificate may only be reproduced in full, except with the prior written permission by issuing laboratory. The results relate only to the tested items. Author Author Date and place Lohja 15.3.2017 Author Toni Viheriäkoski, CEO, Cascade Metrology, ESD Engineer Toni Viheriäkoski, CEO, Cascade Metrology, ESD Engineer Toni Viheriäkoski Cascade metrology Oy, Hakulintie 32, 08500 Lohja [email protected] Treston Oy, Sorakatu 1, 20730 Turku Kimmo Lehti, +358 50 395 8562, [email protected] Dates of Test Place of Test Dates of Test Cascade Metrology, Electrostatics Laboratory, Hakulintie 32, 08500 Lohja GSM +358 4456 88 599 Conditioning Lohja 15.3.2017 st Place of Test Place of Test Date and place Treston Oy, Sorakatu 1, 20730 Turku Kimmo Lehti, +358 50 395 8562, [email protected] th 1/1 18.3.2017 Table 1: General Information Client GS-Prüfzeichen für Beleuchtung ESD-Zulassung Unsere ESD-Produkte erfüllen die grundlegenden Anforderungen der Norm IEC61340-5-1. Table 1: General Information Contact Verpackungsentsorgung gemäß EU-Richtlinien Lohja 18.3.2017 Toni Viheriäkoski Cascade metrology Oy, Hakulintie 32, 08500 Lohja [email protected] Toni Viheriäkoski, CEO, Cascade Metrology, ESD Engineer Toni Viheriäkoski Cascade metrology Oy, Hakulintie 32, 08500 Lohja [email protected] Reinraumtauglichkeit Treston Concept- und WB-Arbeitstische motorisiert Reinraumtauglichkeit Treston Ergo Stuhl C20PU-ESD ISO 14644-1, Klasse 7 ISO 14644-1, Klasse 7 ESD-Zertifikat Treston Arbeitstische WB und Concept – Erfüllung der Basisanforderungen gemäß IEC 61330-5-1 Gern senden wir Ihnen das benötigte Zertifikat zu. Bitte wenden Sie sich an [email protected]. ! Die Garantiezeit für von TRESTON hergestellte Produkte beträgt 5 Jahre ab dem Datum der Lieferung. Davon ausgenommen sind Tischplatten, elektronische Bauteile, Sonderanfertigungen und normale Verschleißteile, für die eine Garantiezeit von 2 Jahren gilt. TRESTON - ERGONOMIE | ESD | LEAN 2 years GUARANTEE 5 years GUARANTEE 19
216 Seiten | Gültig bis 12/2024 | Vorherige Seite | Nächste Seite
Sprache wählen
Rechtliches
Ausschließlich verantwortlich für Inhalt, Preis- und Artikelangaben der dargestellten Produkte und Angebote innerhalb der Kataloge ist der Hersteller. Technische und optische Änderungen des Herstellers und Irrtümer vorbehalten.
Anfrageformular für spezielle Produkte
Der ToolTeam® Beschaffungsservice
Sie suchen Produkte die im Katalog abgebildet, aber online nicht direkt kaufbar sind?Unser Beschaffungs-Service macht Ihnen gerne ein unverbindliches und individuelles Angebot.