Högert Katalog Arbeitsschutzausrüstung Seite 169
Gewerbekunden Angebot**Topseller von Högert Technik
STANDARDS LIST OF STANDARDS EN 397 – Industrial protective helmets. The standard specifies design requirements and protective parameters, testing methods and requirements related to marking of protective helmets for industry. Mandatory and additional requirements related to protective parameters have been established. EN HEAD PROTECTION MANDATORY REQUIREMENTS Shock absorption capacity Shock energy transferred to the model of head cannot exceed 5 kN during the fall of a drop weight of 5 kg from a height of 1 m). Puncture resistance. A 3 kg striker with a height of 1 m cannot distort the helmet to touch the head mock-up. Resistance to flame The flame of the burner at an angle of 45 degrees from the vertical should be at a distance of 50 to 100 mm and contact the tip of the shell for 10 seconds. The shell of the helmet cannot burn and spread the flame longer than 5 seconds after it has been discontinued. EN 50365:2002 – Insulating helmets for use in low voltage installations where there is a possibility of high voltage electric contact (up to 1000 V or 1500 V DC). This standard exceeds the requirements of optional electrical tests resistance according to EN 397 and EN 812 and electrical requirements of EN 443. HEARING PROTECTION LIST OF STANDARDS EN 352-1 Ear-muffs – defines the requirements for the construction, design and technical characteristics, methods of research, labelling provisions and information intended for users. According to the guidelines, the rules are designed to provide information related to the soundproofing of measured hearing protectors in accordance with EN 24869-1. EN 352-2 Earplugs – Refers to the molded earplugs against noise and fixed inserts with tape specifying the requirements for construction, design, properties, testing methods, labelling rules and information intended for users. EN 352-3 Ear-muffs attached to industrial safety helmets – Specifies the requirements for construction, design, properties, test methods, and regulations for the marking of hearing protectors. It also provides Information for the user when these protectors are mounted on protective helmets (i.e. regarding the method of correct adjustment of the suppressing bowls). PARAMETERS OF EN352 the possibility of matching earmuffs to different sizes; the pressure of the rollbar is 14N (maximum); the pressure of the damping bowl is 4500 Pa (maximum); damage resistance checked by dropping the product from a height of 1,5 meters onto a steel plate; flammability is checked by touching the product for 5 seconds with a heated rod up to 650°C +/- 20°C. The surface can not ignite or glow after deducting the rod. REQUIREMENTS OF DIRECTIVE 2003/10 / EC Requirements for protection against noise exposure: EXPOSURE WITHIN 8 HOURS ON: 85 dB or more 80 dB or more More than 75 dB and less than 80 dB Mandatory protectors Protectors at the employee’s disposal Protectors recommended 167
212 Seiten | Gültig bis 06/2022 | Vorherige Seite | Nächste Seite
Sprache wählen
Rechtliches
Ausschließlich verantwortlich für Inhalt, Preis- und Artikelangaben der dargestellten Produkte und Angebote innerhalb der Kataloge ist der Hersteller. Technische und optische Änderungen des Herstellers und Irrtümer vorbehalten.
Anfrageformular für spezielle Produkte
Der ToolTeam® Beschaffungsservice
Sie suchen Produkte die im Katalog abgebildet, aber online nicht direkt kaufbar sind?Unser Beschaffungs-Service macht Ihnen gerne ein unverbindliches und individuelles Angebot.