zoom_in
zoom_out
fullscreen
-15%
Woelm KWS 6009 lock for door thicknesses of 65 - 70 mm 600907
Artikelnummer: T-686031
86,25 € (inkl. 19% skat, ekskl. forsendelsesomkostninger)
72,48 € (ekskl. moms, ekskl. forsendelsesomkostninger)
101,45 € MSRP
På lager,klar til forsendelse inden for 48 timer
Stk.
doneMade in Germany
Hot-dip galvanized malleable cast iron, with central axis made of steel, with locking catch, compression spring and felt seals, door operation in pairs, right/left information required
Indhold:
1 Stk.
Forsendelse:
The shipping costs for Danmark could not be calculated automatically.
Udbyder:
Salg og levering før ToolTeam®
Betalingsmetoder:
Returforsendelser:
Sikkerhed:
Produktdata
Fabrikant:
HELM - Woelm GmbH
Tilstand:
Ny
Artikelnummer:
T-686031
SKU producent:
600907
GTIN -kode (EAN):
2000000686031
Vægt:
0,00 Kg
Alle oplysninger vedrørende produkter fra HELM - Woelm GmbH. Der tages forbehold for tekniske og optiske ændringer og fejl fra producentens side.
This page has been machine-translated, the original german version can be found here, please also note the Oversættelse Ansvarsfraskrivelse.
Produktbeskrivelse
6009..
D = 65 - 70 mm
For two-sided door operation made of malleable cast iron with central axis made of steel, with locking catch, compression spring, felt seals
Door thicknesses >, 70 mm on request
Assembly
Drill a hole in the door for the axis according to the dimensions in the adjacent drawing, screw on the screw-on rosettes with felt seals underneath so that two screw holes are horizontal and two are horizontal .Align vertically with the central hole, push the pin part through and screw the hole part tight with a compression spring and a lock nut. Fasten the locking catch in the door frame at the appropriate point.
The operating range of the levers is 45º. The lock should be fitted so that the levers point upwards at an angle of 45º when in the open position.
Photo shows lock for left-hand door
Relaterede resultater
Komplette kataloger
Tilbuddet er udelukkende rettet mod erhvervskunder, virksomheder, offentlige institutioner, håndværkere og freelancere. Alle priser i kataloger er eksklusive moms, forsendelsesomkostninger og eventuelle tillæg.
Producenten er kun ansvarlig for indhold, pris og artikeldetaljer for produkterne og tilbuddene i katalogerne. Med forbehold for tekniske og optiske ændringer og fejl fra producentens side.
Producenten er kun ansvarlig for indhold, pris og artikeldetaljer for produkterne og tilbuddene i katalogerne. Med forbehold for tekniske og optiske ændringer og fejl fra producentens side.
Matchende katalog
Kommercielt kundetilbud **
Produktforslag
-7%
KWS 6029 lock on base plate, one-sided
602902
33,40 €
ekskl. forsendelsesomkostninger
35,95 € MSRP
ekskl. forsendelsesomkostninger
KWS 6029 lock on base plate, one-sided
602907
41,95 €
ekskl. forsendelsesomkostninger
ekskl. forsendelsesomkostninger
-9%
KWS 6101 lock for door thicknesses of 25 - 30 mm
610106
58,35 €
ekskl. forsendelsesomkostninger
64,29 € MSRP
ekskl. forsendelsesomkostninger
-14%
KWS 6101 lock for door thicknesses of 25 - 30 mm
610182
269,60 €
ekskl. forsendelsesomkostninger
312,75 € MSRP
ekskl. forsendelsesomkostninger
-18%
KWS 6101 lock for door thicknesses of 25 - 30 mm
610183
256,80 €
ekskl. forsendelsesomkostninger
312,75 € MSRP
ekskl. forsendelsesomkostninger
-15%
KWS 6109 lock for door thicknesses of 65 - 70 mm
610906
71,45 €
ekskl. forsendelsesomkostninger
84,05 € MSRP
ekskl. forsendelsesomkostninger
-19%
KWS 6109 lock for door thicknesses of 65 - 70 mm
610982
284,35 €
ekskl. forsendelsesomkostninger
352,49 € MSRP
ekskl. forsendelsesomkostninger
-19%
KWS 6109 lock for door thicknesses of 65 - 70 mm
610983
284,35 €
ekskl. forsendelsesomkostninger
352,49 € MSRP
ekskl. forsendelsesomkostninger
-7%
KWS 6128 locking plate e.g. Weld on, left/right
612806
35,20 €
ekskl. forsendelsesomkostninger
37,89 € MSRP
ekskl. forsendelsesomkostninger
-18%
KWS 6128 locking plate e.g. Weld on, left/right
612882
173,65 €
ekskl. forsendelsesomkostninger
211,45 € MSRP
ekskl. forsendelsesomkostninger
-18%
KWS 6128 locking plate e.g. Weld on, left/right
612883
173,65 €
ekskl. forsendelsesomkostninger
211,45 € MSRP
ekskl. forsendelsesomkostninger
KWS 6533 locking catch for lock 6029..
653302
5,75 €
ekskl. forsendelsesomkostninger
ekskl. forsendelsesomkostninger
KWS 6533 locking catch for lock 6029..
653307
6,00 €
ekskl. forsendelsesomkostninger
ekskl. forsendelsesomkostninger
KWS 6536 locking catch for lock 6001..-6009..
653602
3,95 €
ekskl. forsendelsesomkostninger
ekskl. forsendelsesomkostninger
KWS 6536 locking catch for lock 6001..-6009..
653607
4,25 €
ekskl. forsendelsesomkostninger
ekskl. forsendelsesomkostninger
No Review yet
Description: No Review yet
Written by: No Review
Rating: 5 out of 5
5 stars, based on 1
reviews
Woelm KWS 6009 lock for door thicknesses of 65 - 70 mm 600907
on both sides
pressure spring
hot-dip galvanised
felt seal
lever
lever lock
Made in Germany
in pairs
locking catch
lock
two-sided
6009..
D = 65 - 70 mm
For two-sided door operation made of malleable cast iron with central axis made of steel, with locking catch, compression spring, felt seals
Door thicknesses >, 70 mm on request
Assembly
Drill a hole in the door for the axis according to the dimensions in the adjacent drawing, screw on the screw-on rosettes with felt seals underneath so that two screw holes are horizontal and two are horizontal .Align vertically with the central hole, push the pin part through and screw the hole part tight with a compression spring and a lock nut. Fasten the locking catch in the door frame at the appropriate point.
The operating range of the levers is 45º. The lock should be fitted so that the levers point upwards at an angle of 45º when in the open position.
Photo shows lock for left-hand door T-686031 600907 2000000686031 da ["de","en","it","nl","nl","fr","es","pl","pt","cs","da","sv"] https://www.toolteam.com/da-DK/woelm-kws-6009-lock-for-door-thicknesses-of-65-70-mm-600907-t-686031-2000000686031?dc=DK&cu=EUR 2026-09-04 86.25 Danmark DK DE 14
6009..
D = 65 - 70 mm
For two-sided door operation made of malleable cast iron with central axis made of steel, with locking catch, compression spring, felt seals
Door thicknesses >, 70 mm on request
Assembly
Drill a hole in the door for the axis according to the dimensions in the adjacent drawing, screw on the screw-on rosettes with felt seals underneath so that two screw holes are horizontal and two are horizontal .Align vertically with the central hole, push the pin part through and screw the hole part tight with a compression spring and a lock nut. Fasten the locking catch in the door frame at the appropriate point.
The operating range of the levers is 45º. The lock should be fitted so that the levers point upwards at an angle of 45º when in the open position.
Photo shows lock for left-hand door T-686031 600907 2000000686031 da ["de","en","it","nl","nl","fr","es","pl","pt","cs","da","sv"] https://www.toolteam.com/da-DK/woelm-kws-6009-lock-for-door-thicknesses-of-65-70-mm-600907-t-686031-2000000686031?dc=DK&cu=EUR 2026-09-04 86.25 Danmark DK DE 14