home
Mærker
MUNK GmbH
Alle kategorier af MUNK GmbH
MUNK Multiple-flight vertical ladder with back protection (machinery) bright aluminium 12.12m 510231

MUNK Multiple-flight vertical ladder with back protection (machinery) bright aluminium 12.12m 510231 Thumbnail

MUNK Multiple-flight vertical ladder with back protection (machinery) bright aluminium 12.12m 510231

Artikelnummer: T-842291

På lager,
klar til forsendelse inden for 5 - 6 hverdage

Stk.

Made in Germany

Multi-section ladder with back protection (machines) made of bright aluminum

Indhold:

1 Stk.

Forsendelse:

The shipping costs for Danmark could not be calculated automatically.

Udbyder:

Salg og levering før ToolTeam Köln

Betalingsmetoder:

PayPal, Betal med faktura, Kreditkort, Forudbetaling med bank, Bankdebet

Returforsendelser:

Kunden kan returnere varen efter de angivne betingelser: Flere detaljer

Sikkerhed:

Beskyttet gennem ToolTeam -køberbeskyttelsen: Flere detaljer

Produktdata

Fabrikant:

MUNK GmbH

Tilstand:

Artikelnummer:

T-842291

SKU producent:

510231

GTIN -kode (EAN):

4031405943544

Vægt:

81,10 Kg

Alle oplysninger vedrørende produkter fra MUNK GmbH. Der tages forbehold for tekniske og optiske ændringer og fejl fra producentens side. This page has been machine-translated, the original german version can be found here, please also note the Oversættelse Ansvarsfraskrivelse.

Produktbeskrivelse

Range of application
Access to machinery and mechanical systems.
Irrespective of the climbing height:
As a safety railing, back protection is preferable to fall protection (combination is not permitted as the rescue of persons is hindered by the back protection).
The need for an occupational medical examination for suitability for working at height (e.g. G 41) depends on the risk assessment (e.g. total climbing height, type of safety railing) of the respective vertical ladder systems
Proof of the load capacity of the underlying surface must be checked and approved for each construction project by a cognizant stability expert
Barrier (safety door) is always required
If required by the access situation, vertical ladders with fall protection must be fitted with suitable protective devices (e.g. steel lockable door) to prevent unauthorised use.
For lateral bridging steps, the ladder sections must run at a higher level
The overlap of the back protection must be at least 2,000 mm for multiple-flight ladders.
At unsecured exit points, railings attached to both sides of the vertical ladder or led into the exit level are required
Gap at exit step must not be larger than 60 – 75 mm
Step-on dimension: Distance from entry level to the first rung 100–400 mm. The top edge of the uppermost rung must be at the same height as the walking surface of the exit point.
The clearances between the vertical ladder system and the railing must not exceed 120 mm
The connection to the fall protection must be established and released from a secured standing position. A secured standing position is, for example, a platform with railing and a secured access
A safety door, order no. 063502, is required for the exit. This is not included in the scope of delivery of the complete set and must be ordered separately
The maximum height of the individual ladder sections is 6.0 m

12,12m

Relaterede resultater

MUNK Günzburger Steigtechnik MUNK climbing technology Günzburg step ladders rung ladders platform ladders platform ladders steps platforms floorboards stairs oversteps catwalks scaffolding fixed ladders shaft ladders material handling small work platforms lifts rescue technology fire brigade ladders DIN EN 1147 Fire brigade ladders ÖNORM F 4047 rescue platforms tool boxes / boxes tool shed equipment other equipment vehicle installations vehicle attachments roll containers eRC

Komplette kataloger

Tilbuddet er udelukkende rettet mod erhvervskunder, virksomheder, offentlige institutioner, håndværkere og freelancere. Alle priser i kataloger er eksklusive moms, forsendelsesomkostninger og eventuelle tillæg.
Producenten er kun ansvarlig for indhold, pris og artikeldetaljer for produkterne og tilbuddene i katalogerne. Med forbehold for tekniske og optiske ændringer og fejl fra producentens side.

MUNK - Access Solutions 2023

404 Sider (PDF)
Kommercielt kundetilbud **

Produktforslag

Platform stairs 45° movable step width 1,000 mm 8 steps Grooved aluminium

600808

3.200,70 €
ekskl. forsendelsesomkostninger

5.378,80 € MSRP

Fruit tree poles suitable for straight ladders 10014 and push-up extension ladders 20214

19946

252,60 €
ekskl. forsendelsesomkostninger

420,05 € MSRP

2 Variants

Folding scaffolding SG 1.35 x 1.80 m with outrigger Platform height 9.89 m

115294

9.612,05 €
ekskl. forsendelsesomkostninger

16.153,00 € MSRP

Information sticker for double-sided ladders 250 kg with double-sided access Sticker 19046

19151

7,55 €
ekskl. forsendelsesomkostninger

(0,38 € / Stk.)

11,90 € MSRP

18 Variants

Railing filling piece

984016

11,20 €
ekskl. forsendelsesomkostninger

17,85 € MSRP

Protective cage with retractable toe board

301312

1.097,59 €
ekskl. forsendelsesomkostninger

1.844,50 € MSRP

Mobile scaffolding, 1.35 נ3.0 m, with chassis bar and double platform. Platform height 5.45 m

175535

5.078,65 €
ekskl. forsendelsesomkostninger

8.534,69 € MSRP

Platform stairs 60° movable step width 600 mm 7 steps

600707

2.702,20 €
ekskl. forsendelsesomkostninger

4.541,05 € MSRP

Wall anchor adjustable single-rail ladder

77538

53,45 €
ekskl. forsendelsesomkostninger

86,85 € MSRP

Railing holder

984015

17,05 €
ekskl. forsendelsesomkostninger

27,35 € MSRP

Folding scaffolding for narrow passages Platform height 0.99 m

115301

726,55 €
ekskl. forsendelsesomkostninger

1.220,95 € MSRP

Mobile scaffolding SG 1.35 נ2.45 m with double platform platform height 3.07 m

174337

3.037,15 €
ekskl. forsendelsesomkostninger

5.103,90 € MSRP

Bumper strip for face-sided platform

301314

104,19 €
ekskl. forsendelsesomkostninger

171,35 € MSRP

Mobile scaffolding SG 1.35 נ3 m with outrigger & double platform platform height 10.35 m

169039

10.759,20 €
ekskl. forsendelsesomkostninger

18.080,80 € MSRP

Ladder section anodised aluminium 7 rungs Anodised aluminium

61264

142,55 €
ekskl. forsendelsesomkostninger

236,80 € MSRP

No Review yet

Description: No Review yet Written by: No Review Rating: 5 out of 5 5 stars, based on 1 reviews MUNK Multiple-flight vertical ladder with back protection (machinery) bright aluminium 12.12m 510231 MUNK Günzburger Steigtechnik MUNK climbing technology Günzburg step ladders rung ladders platform ladders platform ladders steps platforms floorboards stairs oversteps catwalks scaffolding fixed ladders shaft ladders material handling small work platforms lifts rescue technology fire brigade ladders DIN EN 1147 Fire brigade ladders ÖNORM F 4047 rescue platforms tool boxes / boxes tool shed equipment other equipment vehicle installations vehicle attachments roll containers eRC

Range of application
Access to machinery and mechanical systems.
Irrespective of the climbing height:
As a safety railing, back protection is preferable to fall protection (combination is not permitted as the rescue of persons is hindered by the back protection).
The need for an occupational medical examination for suitability for working at height (e.g. G 41) depends on the risk assessment (e.g. total climbing height, type of safety railing) of the respective vertical ladder systems
Proof of the load capacity of the underlying surface must be checked and approved for each construction project by a cognizant stability expert
Barrier (safety door) is always required
If required by the access situation, vertical ladders with fall protection must be fitted with suitable protective devices (e.g. steel lockable door) to prevent unauthorised use.
For lateral bridging steps, the ladder sections must run at a higher level
The overlap of the back protection must be at least 2,000 mm for multiple-flight ladders.
At unsecured exit points, railings attached to both sides of the vertical ladder or led into the exit level are required
Gap at exit step must not be larger than 60 – 75 mm
Step-on dimension: Distance from entry level to the first rung 100–400 mm. The top edge of the uppermost rung must be at the same height as the walking surface of the exit point.
The clearances between the vertical ladder system and the railing must not exceed 120 mm
The connection to the fall protection must be established and released from a secured standing position. A secured standing position is, for example, a platform with railing and a secured access
A safety door, order no. 063502, is required for the exit. This is not included in the scope of delivery of the complete set and must be ordered separately
The maximum height of the individual ladder sections is 6.0 m

T-842291 510231 4031405943544 da ["de","en","it","nl","nl","fr","es","pl","pt","cs","da","sv"] https://www.toolteam.com/da-DK/munk-multiple-flight-vertical-ladder-with-back-protection-machinery-bright-aluminium-12-12m-510231-t-842291-4031405943544?dc=DK&cu=EUR 2026-08-03 0 Danmark DK DE 14

Last searches

Frequent searches

Alle kategorier