ZARGES Main Catalog packaging and transportation Side 210
Kommercielt kundetilbud **Top-sælgere fra Zarges
SHAFT EQUIPMENT Quality with depth. 1 Going down safely 5 with the fall arrester system for double-stile ladders; single-stile ladders are also available for situations where space is limited. simplify installation. 6 2 Wide variety of wall brackets A wide range of ladder materials: Steel, stainless steel or GRP. Safe entry into a shaft by means of rotatable access aid. 7 3 Safely anchored with twelve ladder lengths (from 4 to 15 rungs) and two ladder widths (300 or 400 mm). by the safety slide mechanism. 4 More flexibility Flush-fitting covers 8 with cover plate or customisable surface. Available in three different materials (aluminium, steel and stainless steel) and a wide range of sizes. Reliable well covers available in many designs (round or rectangular, with or without vents) for drinking water supply. The maximum distance between wall brackets must be < 1.68 m, meaning ■ 2 sets are required for 4–9 rungs ■ 3 sets are required for 10–15 rungs ■ 5 sets are required for 16–24 rungs Shaft depth D The length of the ladder depends on the shaft depth. As seen in the example on the right, the ladder should always be shorter than the shaft (e.g. shaft 2.50 m, ladder 2.24 m; shaft 2.00 m, ladder 1.68 m). Shaft depth D How many wall brackets are needed? Ladder length L How long should the ladder be? Ladder length L Important information on the selection of material, ladder length and wall-mounting hardware. When do I use which material? Steel: most economical variant, not suitable for aggressive substances, e.g. chlorine, wastewater. GRP: in the electronics sector (prevents sparks), certain resistance (corrosion, acid, water). Stainless steel: in the drinking water sector, sewage treatment plant and seawater (only to a limited extent, not for continuous use). How wide should a ladder be ideally? It depends on the shaft's size – the wider the ladder, the more comfortable it is to use. What hardware is required for mounting a ladder? Rigid wall brackets are used (for rectangular shafts) in 90% of the cases. Adjustable variants are used when there are bends in a shaft. Floor mounting is not mandatory. 210 Shaft ladders, shaft equipment
340 Sider | Gyldig indtil 12/2026 | Previous page | Næste side
Vælg dit sprog
Juridiske oplysninger
Producenten er kun ansvarlig for indhold, pris og artikeldetaljer for produkterne og tilbuddene i katalogerne. Med forbehold for tekniske og optiske ændringer og fejl fra producentens side.
Anmodningsskema til specialprodukter
ToolTeam® indkøbsservice
Leder du efter produkter, der er vist i kataloget, men ikke kan købes direkte online?Vores indkøbstjeneste vil med glæde give dig et uforpligtende og individuelt tilbud.