Metabo - Accessories Side 71
Kommercielt kundetilbud **Produkter fra katalogside
ekskl. forsendelsesomkostninger
ekskl. forsendelsesomkostninger
ekskl. forsendelsesomkostninger
ekskl. forsendelsesomkostninger
ekskl. forsendelsesomkostninger
ekskl. forsendelsesomkostninger
ekskl. forsendelsesomkostninger
ekskl. forsendelsesomkostninger
ekskl. forsendelsesomkostninger
ekskl. forsendelsesomkostninger
ekskl. forsendelsesomkostninger
ekskl. forsendelsesomkostninger
ekskl. forsendelsesomkostninger
ekskl. forsendelsesomkostninger
ekskl. forsendelsesomkostninger
ekskl. forsendelsesomkostninger
ekskl. forsendelsesomkostninger
ekskl. forsendelsesomkostninger
ekskl. forsendelsesomkostninger
ekskl. forsendelsesomkostninger
ekskl. forsendelsesomkostninger
ekskl. forsendelsesomkostninger
Drills and hole saws Drills and hole saws Steel-wire brushes Drill stand Clamping shaft Ø mm Drill stand Drill stand 890 Outer Ø mm Version Steel-wire wheel brush, stainless steel crimped Order no. For light surface processing and deburring work in all metal processing 600890000 For processing profiles, weld seams, cutting edges, gear wheels, grooves, narrow surfaces The design of the feed mechanism enables the maximum drilling depth of 65 mm to be achieved Order no. Edging type: crimped stainless steel wire with a swivelling motion Asymmetrical arrangement of the column in relation to the base plate enables the processing of larger workpieces Unlimited access to the controls of drill and drill stand by angled cantilever Adjustable depth guide 6 75 Crimped 630550000* 6 100 Crimped 630551000* Steel-wire cup brushes, crimped steel 02 For light surface processing and deburring work in all metal processing Inner throat: 165 mm Working stroke: 65 mm Height of column: 500 mm Column Ø: 40 mm Aperture: 43 mm Base plate: 220 x 213 mm Weight: 5.5 kg 01 For processing larger areas, weld seams, metal plates 03 6 50 Crimped 626790000* 6 75 Crimped 630552000* 04 Steel-wire Busby-end brush, crimped steel For light surface processing and deburring work in all metal processing Magnetic drill stands For processing hard to reach spots and inner surfaces Order no. Magnetic drill stand M 100 05 627100000 Magnet base with high holding power for safe operation 6 25 Crimped 630554000* Also suitable, when used in conjunction with the safety chain supplied, for working on vertical, sloping, 06 or overhead surfaces Vertical feed driven by rack and pinion Accessories for dust extraction In order to position the tip of the drill bit that is fitted in the drill exactly over the punch mark on the material to be drilled, the upper part of the magnetic drill stand can be swivelled and moved sideways Order no. Power socket on the drill stand for connecting the drill directly Adjustable support to back up the stand against the high reacting forces that arise when drilling Vacuum cleaner adapter DDE 14 Vacuum cleaner adapter for extracting drilling dust at the hole entry point Graduated collar indicating the depth to which the hole is drilled Safe and dust-free drilling in walls and ceilings Can be complemented with the drill B 32/3 to a magnetic drill unit with max. drill diameter 100 mm By virtue of the 2-chamber system and the foam rubber gasket it stays attached to almost all (even uneven) (with core hole drill). 630829000* 07 08 surfaces, such as plaster, natural stone and woodchip wallpaper. Minimal drill dust residue at walls and wallpapers. Aperture: 65 mm Depth of feed: 260 mm Maximum height: 650 mm Magnetic force (maximum): 18,000 N Dimensions magnetic base: 110 x 220 mm Weight: 22 kg Scope of delivery: Safety chain, fastening screw G 3/4", offset screwdriver SW5 and SW8, sheet steel carry case. The adapter is put on the existing suction hose. The negative pressure of the vacuum cleaner keeps the 09 adapter to the respective subsurface. Drill Ø: 4 - 14 mm Vacuum cleaner adapter DDE 72 631343000* Vacuum cleaner adapter for extracting drilling dust at the hole entry point 10 Safe and dust-free drilling in walls and ceilings By virtue of the 2-chamber system and the foam rubber gasket it stays attached to almost all (even uneven) surfaces, such as plaster, natural stone and woodchip wallpaper. Minimal drill dust residue at walls and wallpapers. Machine vices 11 The adapter is put on the existing suction hose. The negative pressure of the vacuum cleaner keeps the Jaw dimensions mm Clamping width mm Order no. 80 x 45 86 612003000 adapter to the respective subsurface. Drill Ø: 72 mm 12 Other accessories for drills and impact drills 100 x 58 100 Order no. 612001000 Accessories for Sanding/Grinding and Polishing Order no. Rubber backing pad For clamping grinding media Ø 125 mm (e.g. fibre sanding discs) Dimensions: Ø 125 mm Clamping shaft Ø: 8 mm Sales unit: 1 623259000* Side handle Standard version Diameter of aperture: 43 mm 631052000* Side handle, long Long version, especially suitable for working with tools with high torque; with locking screw to prevent slipping off the tool collar Diameter of aperture: 43 mm 631074000* Reducing bush 1/2"-3/8" 630704000 14 15 for drills and impact drills 16 *Self-service packaging | 140 13 141 |
157 Sider | Gyldig indtil 04/2023 | Previous page | Næste side
Vælg dit sprog
Juridiske oplysninger
Producenten er kun ansvarlig for indhold, pris og artikeldetaljer for produkterne og tilbuddene i katalogerne. Med forbehold for tekniske og optiske ændringer og fejl fra producentens side.
Anmodningsskema til specialprodukter
ToolTeam® indkøbsservice
Leder du efter produkter, der er vist i kataloget, men ikke kan købes direkte online?Vores indkøbstjeneste vil med glæde give dig et uforpligtende og individuelt tilbud.