KIPP Clamping Tools Side 325
Kommercielt kundetilbud **Top-sælgere fra KIPP
K0863 Threaded bushings for grid systems Material: Carbon steel. 0,05 A D D2 Version: Tempered to 1100-1300 N/mm². Sample order: K0863.01508305003 A Note: Assembly instructions for changing threaded bushing. L D1 Assembly instructions for locating and threaded bushes L locating bush Inserting the locating and threaded bushing 1. Remove grease from the locating and threaded bushing. 2. Apply adhesive (Loctite 638) in the hole. 3. Apply adhesive (Loctite 638) on the threaded bushing and screw in. 4. Apply adhesive (Loctite 638) to the locating bushing and insert it. If the locating bushing cannot be inserted by hand, please use an assembly tool as shown application example:. 5. Remove any adhesive pressed out by insertion of the locating and threaded bushing before it hardens. D2 threaded bush D1 ±0,01 L locating bush 0,5 assembly tool threaded bush tooling plate tooling plate D2 KIPP Threaded bushings for grid systems Order No. D D2 L K0863.01508305003 M8 M12x1,75 12 K0863.01012304003 M12 M16x1,5 15 K0863.01016405003 M16 M20x1,5 18 326
466 Sider | Gyldig indtil 12/2022 | Previous page | Næste side
Vælg dit sprog
Juridiske oplysninger
Producenten er kun ansvarlig for indhold, pris og artikeldetaljer for produkterne og tilbuddene i katalogerne. Med forbehold for tekniske og optiske ændringer og fejl fra producentens side.
Anmodningsskema til specialprodukter
ToolTeam® indkøbsservice
Leder du efter produkter, der er vist i kataloget, men ikke kan købes direkte online?Vores indkøbstjeneste vil med glæde give dig et uforpligtende og individuelt tilbud.