fischer ETICS-Fixings EWI catalogue Side 21
Kommercielt kundetilbud **Top-sælgere fra Fischer
ekskl. forsendelsesomkostninger
ekskl. forsendelsesomkostninger
ekskl. forsendelsesomkostninger
ekskl. forsendelsesomkostninger
ekskl. forsendelsesomkostninger
ekskl. forsendelsesomkostninger
ekskl. forsendelsesomkostninger
ekskl. forsendelsesomkostninger
ekskl. forsendelsesomkostninger
ekskl. forsendelsesomkostninger
ekskl. forsendelsesomkostninger
ekskl. forsendelsesomkostninger
ekskl. forsendelsesomkostninger
ekskl. forsendelsesomkostninger
ekskl. forsendelsesomkostninger
ekskl. forsendelsesomkostninger
ekskl. forsendelsesomkostninger
ekskl. forsendelsesomkostninger
ekskl. forsendelsesomkostninger
ekskl. forsendelsesomkostninger
ekskl. forsendelsesomkostninger
ekskl. forsendelsesomkostninger
ekskl. forsendelsesomkostninger
ekskl. forsendelsesomkostninger
ekskl. forsendelsesomkostninger
ekskl. forsendelsesomkostninger
ekskl. forsendelsesomkostninger
ekskl. forsendelsesomkostninger
ekskl. forsendelsesomkostninger
ekskl. forsendelsesomkostninger
ekskl. forsendelsesomkostninger
ekskl. forsendelsesomkostninger
ekskl. forsendelsesomkostninger
ekskl. forsendelsesomkostninger
ekskl. forsendelsesomkostninger
ekskl. forsendelsesomkostninger
ekskl. forsendelsesomkostninger
ekskl. forsendelsesomkostninger
ekskl. forsendelsesomkostninger
ekskl. forsendelsesomkostninger
Screw fixings termoz CS 8 The economic screw fixing for all ETICS insulation materials Countersunk installation Polystyrene rigid foam boards O35 on perforated sand-lime brick BUILDING MATERIALS APPROVALS ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ 3 18 Building material classes A, B, C, D, E Concrete Concrete (weather shell) Building brick Solid sand-lime brick Hollow blocks made from lightweight concrete Vertically perforated brick Perforated sand-lime brick Lightweight aggregate concrete Aerated concrete ADVANTAGES APPLICATIONS FUNCTIONING ▪ Compound screw minimises the thermal bridge, thus there are no fixing marks on the façade. ▪ Recessed installation with round cap provides a smooth surface for thinner render layer. ▪ Less drill wear and drill time due to minimum installation depth of 35 mm in the substrate. ▪ With flush installation, the disc tapers to a very thin edge, thus providing for optimal retaining of the insulation panel and for application of thin render. ▪ While flush installation the anchor washer can be combined with larger insulation disc DT 90, DT 110 and DT 140 for very soft insolation materials. ▪ For insulation material thicknesses up to 340 mm. ▪ Standard embedment depth for all building materials. ▪ Attachment of ETICS insulating boards on concrete and masonry ▪ Flush installation in all conventional insulation materials ▪ Flush installation of insulation materials such as polystyrene rigid foam panels and dense mineral wool panels ▪ The fixing is pushed through the insulation into the drilled hole and is screwed tight. ▪ For recessed installation, you require the installation tool termoz CS. ▪ Optionally, the installation tool termoz CS can also be used for flush installation by turning the disc. ▪ For recessed installation, the insulation disc is to be covered with a round plug. ▪ When using the installation tool, the installation is completed when the stop disc is flush with the insulation panel. ▪ For lengths from 250 mm the optional supplied bits T 25 are required.
71 Sider | Gyldig indtil 12/2025 | Previous page | Næste side
Vælg dit sprog
Juridiske oplysninger
Producenten er kun ansvarlig for indhold, pris og artikeldetaljer for produkterne og tilbuddene i katalogerne. Med forbehold for tekniske og optiske ændringer og fejl fra producentens side.
Anmodningsskema til specialprodukter
ToolTeam® indkøbsservice
Leder du efter produkter, der er vist i kataloget, men ikke kan købes direkte online?Vores indkøbstjeneste vil med glæde give dig et uforpligtende og individuelt tilbud.
