Eurotec catalogue wood construction screws Side 6
Kommercielt kundetilbud **Top-sælgere fra Eurotec
Wood construction screws MATERIAL AND COATING Eurotec wood construction screws are long tried and tested and used worldwide. A variety of different specifications such as the friction shaft and cutting ribs make them easier to screw in. These are available in different quality classes and dimensions, offering the best possible fastening alternatives for the construction projects at hand. The additional different thread types and screw tips offer the best solution for any application. MATERIAL AND COATING OVERVIEW Hardened carbon steel + special coating 1000 · Can be used in service classes 1 and 2 according to DIN EN 1995 (Eurocode 5) · Can withstand up to 1000 hours of salt spray testing under DIN EN ISO 9227 NSS · Corrosiveness category C4 long/ C5-M long under DIN EN ISO 12944-6 · Good resistance to mechanical stresses · Not suitable for wood containing tannins Hardened carbon steel + blue/yellow electrogalvanised · Resistant to corrosion · Can be used in service classes 1 and 2 according to DIN EN 1995 (Eurocode 5) · Good resistance to mechanical stresses · Not suitable for wood containing tannins Hardened stainless steel · Stainless steel according to DIN EN 10088 (magnetizable) · Acid-resistant to a limited extent · 10 years of experience without corrosion problems in suitable woods · 50% higher breaking strength than A2 and A4 · Can be used in service classes 1, 2 and 3 · Not suitable for woods containing a large amount of tannins such as cumarú, oak, merbau, robinia, etc. · Not suitable for saliferous or chlorinated atmospheres A2 stainless steel · Suitable for saliferous atmospheres to a limited extent · Acid-resistant to a limited extent · Not suitable for chlorinated atmospheres · Can be used in service classes 1, 2 and 3 · Only suitable for wood containing tannins to a limited extent A4 stainless steel · Suitable for wood containing tannins · Suitable for saliferous atmospheres · Acid-resistant to a limited extent · Can be used in service classes 1, 2 and 3 · Not suitable for chlorinated atmospheres 6
16 Sider | Gyldig indtil 08/2025 | Previous page | Næste side
Vælg dit sprog
Juridiske oplysninger
Producenten er kun ansvarlig for indhold, pris og artikeldetaljer for produkterne og tilbuddene i katalogerne. Med forbehold for tekniske og optiske ændringer og fejl fra producentens side.
Anmodningsskema til specialprodukter
ToolTeam® indkøbsservice
Leder du efter produkter, der er vist i kataloget, men ikke kan købes direkte online?Vores indkøbstjeneste vil med glæde give dig et uforpligtende og individuelt tilbud.