ERCOLINA bending technology catalog Side 96
Kommercielt kundetilbud **Produkter fra katalogside
TOOLING FOR ERCOPRESS For EP45 and EP25 TOOLING FOR BAR FOLDING Art. EP2MS4V EP2MS85-80 EP2MS80-140 EP25-0008-00 EP45PC EPL60R5 Description 4 V prism (16 - 22 - 35 - 50 mm width) height 200 mm. Max capacity flat bar 200 x 6 mm at 90° 80 mm V prism, height 200 mm. Max capacity flat bar 200 x 10 mm at 90° 140 mm V prism, height 200 mm. Max capacity flat bar 200 x 15 mm (for EP25) and 200 x 20 mm (for EP45) at 90° EP2MS85-80 EP2MS80-140 EP25-0008-00 EP45PC Bending insert holder height 200 mm, including radius 3 mm insert for bending flat bar max capacity 200 x 6 mm (for EP25) Bending insert holder height 200 mm, including radius 3 mm insert for bending flat bar max capacity 200 x 10 mm (for EP45) Insert radius 5 mm height 200 mm. Max capacity flat bar 200 x 10 mm (for EP25) EP4CR5 Insert radius 10 mm height 200 mm. Max capacity flat bar 200 x 15 mm (for EP25) Insert radius 5 mm height 200 mm. Max capacity flat bar 200 x 12 mm (for EP45) EP4CR10 Insert radius 10 mm height 200 mm. Max capacity flat bar 200 x 15 mm (for EP45) EP4CR15 Insert radius 15 mm height 200 mm. Max capacity flat bar 200 x 20 mm (for EP45) EPL60R10 EP2MS4V EPL60R10 EP4CR5 For dimensions in inches, see conversion table on page 97. TOOLING FOR TUBE EXPANSION / REDUCTION Art. EP250-G1 EP250-G2 EP250-E1* EP250-E2* EP250-R1* EP250-R2* EP250-F1 EP250-F2 EP250-C1 EP250-C2 Description Tube holding jaws (set of 2) Ø from 10 to 48 mm. Specify exact Ø Tube holding jaws (set of 2) Ø from 49 to 76 mm. Specify exact Ø Tube expansion punch Ø from 10 to 48 mm. Specify exact Ø and wall thickness Tube expansion punch Ø from 49 to 76 mm. Specify exact Ø and wall thickness Tube reduction punch Ø from 10 to 48 mm. Specify exact Ø and wall thickness Tube reduction punch Ø from 49 to 76 mm. Specify exact Ø and wall thickness Flat flanging punch Ø from 10 to 48 mm. Specify exact Ø and wall thickness Flat flanging punch Ø from 49 to 76 mm. Specify exact Ø and wall thickness 45° conical flanging punch Ø from 10 to 48 mm. Specify exact Ø and wall thickness 45° conical flanging punch Ø from 49 to 76 mm. Specify exact Ø and wall thickness EP250-G1/G2 EP250-E1/E2 EP250-R1/R2 EP250-F1/F2 EP250-C1/C2 * Max work length of tube = 2 x Ø. For higher lengths contact the Manufacturer for feasability study. For dimensions in inches, see conversion table on page 97. 94 MW / E / A
104 Sider | Gyldig indtil 12/2023 | Previous page | Næste side
Vælg dit sprog
Juridiske oplysninger
Producenten er kun ansvarlig for indhold, pris og artikeldetaljer for produkterne og tilbuddene i katalogerne. Med forbehold for tekniske og optiske ændringer og fejl fra producentens side.
Anmodningsskema til specialprodukter
ToolTeam® indkøbsservice
Leder du efter produkter, der er vist i kataloget, men ikke kan købes direkte online?Vores indkøbstjeneste vil med glæde give dig et uforpligtende og individuelt tilbud.