ENERPAC - Industrial Tools Side 289
Kommercielt kundetilbud **Produkter fra katalogside
ekskl. forsendelsesomkostninger
ekskl. forsendelsesomkostninger
ekskl. forsendelsesomkostninger
ekskl. forsendelsesomkostninger
ekskl. forsendelsesomkostninger
ekskl. forsendelsesomkostninger
ekskl. forsendelsesomkostninger
ekskl. forsendelsesomkostninger
ekskl. forsendelsesomkostninger
ekskl. forsendelsesomkostninger
Pneumatic Torque Wrenches PTW-Series Pneumatic Torque Wrenches Enerpac PTW-Series Pneumatic Torque Wrenches are designed for applications that require speed and control. The standard package includes a Torque Wrench with a calibration certificate, an FRL (Filter/Regulator/ Lubricator), and a 10 ft. (3 m) long, ½" (13 mm) diameter air hose, which connects the FRL to the wrench. Once the air hoses are connected, the operator simply adjusts the air pressure on the FRL to achieve the desired torque using the calibration certificate. After this, the tool is ready to go to work!* The air source used with the PTW system must be regulated and/ or limited to 120 psi (8.3 bar), and must be capable of providing a volume of at least 50 CFM (85 CMH) at 100 psi (6.9 bar). A separate ½" (13 mm) hose (not included) must be used to connect the FRL to the air supply. PTW Series Nominal Output Torque: 6000 Ft.lbs Square Drive Range: ¾ - 1 - 1½ inches *See instruction manual for comprehensive instructions Accessories Enerpac offers a full line of accessories including a range of reaction arms and drives. 288 Page: BSH-Series Sockets ① PTW Torque Wrench Heavy-Duty Impact Sockets for power driven torquing equipment. ② Standard Reaction Arm ③ FRL120C Filter-Regulator-Lubricator with 10-foot air hose 244 Page: Back-Up Spanner A B Hands free tool to be used to stop back nut from turning during make up or break out. Two hex sizes in one tool. 11.02 9.69 11.77 C D 245 Page: ® ▼ SELECTION CHART Minimum Torque (Ft.lbs) (Nm) 300 300 500 900 1300 407 407 678 1220 1763 All tools are shipped complete with standard reaction arm and FRL*. Nominal Torque (Ft.lbs) (Nm) 1000 1000 2000 3000 6000 1356 1356 2712 4067 8135 Square Drive (in) ¾ 1 1 1 1½ Model Number* PTW1000-75C PTW1000C PTW2000C PTW3000C PTW6000C 12.6 12.6 8.0 3.1 2.5 Weight** Dimensions (in) RPM A B C D (lbs) 10.70 10.70 11.26 13.50 14.40 3.27 3.27 3.27 3.27 4.49 2.83 2.83 3.11 3.74 5.00 5.12 5.12 5.24 5.24 7.00 17.4 18 19.5 23 39 * To order without FRL and hose, remove “C” suffix from model number (e.g. PTW3000). ** Weight does not include reaction arm. Reaction arm weight for PTW1000, PTW2000, PTW3000 is 2.9 lbs. and for the PTW6000 is 7.75 lbs. 287
424 Sider | Gyldig indtil 12/2023 | Previous page | Næste side
Vælg dit sprog
Juridiske oplysninger
Producenten er kun ansvarlig for indhold, pris og artikeldetaljer for produkterne og tilbuddene i katalogerne. Med forbehold for tekniske og optiske ændringer og fejl fra producentens side.
Anmodningsskema til specialprodukter
ToolTeam® indkøbsservice
Leder du efter produkter, der er vist i kataloget, men ikke kan købes direkte online?Vores indkøbstjeneste vil med glæde give dig et uforpligtende og individuelt tilbud.