ENERPAC - Industrial Tools Side 116
Kommercielt kundetilbud **Produkter fra katalogside
ekskl. forsendelsesomkostninger
ekskl. forsendelsesomkostninger
ekskl. forsendelsesomkostninger
ekskl. forsendelsesomkostninger
ekskl. forsendelsesomkostninger
ekskl. forsendelsesomkostninger
ekskl. forsendelsesomkostninger
ekskl. forsendelsesomkostninger
ekskl. forsendelsesomkostninger
ZE-Series Ordering Guide ▼ ZE-SERIES PUMP MODELS ▼ STEP 1: Select a Pump from the Pump Ordering Matrix. The functionality of the pump can be determined by the model number. Utilize the guide below to select the best pump for the application from the pump matrix. No Valve with coverplate, no electric box 1 2 3 4 Product Type Motor Type Flow Group Valve Type 5 1 Product Type Z = Pump Class 2 Motor Type E 6 = Induction Electric Motor 3 Flow Group 3 = 40 in3/min @ 10,000 psi 4 = 60 in3/min @ 10,000 psi 5 = 120 in3/min @ 10,000 psi 6 = 200 in3/min @ 10,000 psi 4 Valve Types 0 1 2 = No valve w/cover plate = Dump (VE32D) = 3-way/2-position manual (VM32) 3 = 3-way/3-position manual or electric (VM33 or VE33) 4 = 4-way/3-position manual or electric (VM43 or VE43) 6 = 3-way/3-position locking manual w/po check (VM33L) 7 = 3-way/2-position manual (VM22) 8 = 4-way/3-position locking manual w/po check (VM43L) 10 = 3-way/3-position manual, Venturi-Valve (VM33VAC) 6) 11 = 3-way/3-position electric, Venturi-Valve (VE33VAC) 6) 8 7 Reservoir Valve Voltage Capacity Operation Factory Installed Accessories 5 Reservoir Capacity 04 = 1.2 gallon * 08 = 1.8 gallon * 10 = 2.6 gallon 20 = 5.2 gallon 40 = 10.3 gallon * not available on ZE5 or ZE6 D L M N S = Dump valve (w/ pendant and LCD) = Manual valve (w/o pendant, w/ LCD) = Manual valve 3) (w/o pendant or LCD) = No valve 3) (no electrical box) = Solenoid valve (w/ pendant and LCD) 7 Voltage Single Phase (not on ZE5 or ZE6) B E I = 115V 1 ph 50-60Hz 1) = 208-240V 1 ph 50-60 Hz European Plug = 208-240V 1 ph 50-60 Hz USA Plug Three Phase 3) G J W = 208-240V 3ph 50-60Hz = 460-480V 3ph 50-60Hz = 380-415V 3ph 50-60Hz Select factory installed accessories and add to the pump model number after the hyphen. The example above shows that a Return Line Filter (F) and Heat Exchanger (H) have been added to the pump. 8 Factory installed accessories include the following: = = = = Return Line Filter 0-15,000 psi gauge (2 1/2") 4) Heat exchanger 2) Skid bar (1.2 and 1.8 gal. reservoirs only) L = Level/temperature switch 2) • Ideal choice for most applications • Manual valve control, for both single-acting or doubleacting applications • Venturi Valve Technology (VM33VAC) for faster retract of single-acting cylinders • Manual motor control • On/off switch on 1-phase electric motor 6 Valve Operation ▼ STEP 2: Factory Installed Accessories F G H K Manual Valve without electric box or LCD N = No reservoir handles (includes lifting eyes) 7) R = Roll cage S = Single stage 5) T = Pressure transducer 2) 4) U = Foot switch 2) Solenoid Dump Valve with electric box and LCD • Ideal for punching, crimping and cutting • For use when load holding is not required • Push-button control pendant with 10-ft. cord controls the valve and motor Solenoid 3-position Valve with Electric Box • Ideal for production and lifting applications • All valves are 3-position for Advance-Hold-Retract • Venturi Valve Technology (VE33VAC) for faster retract of single-acting cylinders • Push-button control pendant with 10-ft. cord controls the valve and motor 1) 115-volt pumps are supplied with 15-amp plug for intermittent use. 20-amp circuit recommended for frequent full pressure use. 2) These accessories require LCD electrical package. Pressure switch option only available on manual valves without locking valve. The LCD electrical package can accept either a pressure switch or pressure transducer, but not both. 3) Standard Electric models with 3-phase motors without electric boxes are shipped without cord, motor starter or overload protection. 4) Pressure gauge not available on pump models with pressure transducer. Pressure transducer provides digital pressure readout on LCD display. 5) Not available on Valve Types 10, 11 6) Not available on ZE3 7) Lifting eyes (N) not available on reservoir capacities 04 or 08. 114 www.enerpac.com
424 Sider | Gyldig indtil 12/2023 | Previous page | Næste side
Vælg dit sprog
Juridiske oplysninger
Producenten er kun ansvarlig for indhold, pris og artikeldetaljer for produkterne og tilbuddene i katalogerne. Med forbehold for tekniske og optiske ændringer og fejl fra producentens side.
Anmodningsskema til specialprodukter
ToolTeam® indkøbsservice
Leder du efter produkter, der er vist i kataloget, men ikke kan købes direkte online?Vores indkøbstjeneste vil med glæde give dig et uforpligtende og individuelt tilbud.