KAPPES Heavy-duty enclosure Empty enclosure/Mod 40 1950 x 1000 x 600 mm RAL 7035 Without centre partition Inside door: ®RasterPlan slotted panel. 1462.00.4013

Heavy-duty enclosure empty enclosure/Mod 40, 1950 x 1000 x 600 mm, RAL 7035, without centre partition, inside of door: ®RasterPlan slotted panel. An enclosure for really heavy loads. All models in our heavy-duty enclosure series have one thing in common: a load capacity of up to 1.65 tonnes. The base alone can carry up to 400 kg g.v.L.! This makes the heavy-duty cabinets particularly suitable for storing the heaviest tools, such as embossing and punching moulds, etc. Wall or floor anchoring is recommended. Load capacity up to 1.65 t without centre partition. Extremely stable, welded steel construction with hard-soldered corners. Impact and scratch-resistant plastic coating, light grey body. Smooth fronts due to pre-installed doors, opening angle over 200°. Continuous rod guidance. Double-walled reinforced doors, perforated and slotted panel doors, window doors. Telescopic drawers with full-extension runners, drawer load 110 kg g.v.L.! 3 drawer heights, can also be retrofitted on request. Galvanised shelves, load capacity 160 or optionally 200 kg g.f.l. ! Adjustable in 25 mm increments. Three-bolt security cylinder lock. Additional group or master keys available on request.