zoom_in
zoom_out
fullscreen
-9%
Woelm KWS 1311 Screw-on gate holder, floor mounting 131103
SKU: T-681942
53,25 € (vč. 19% daň, Bez dopravy)
44,75 € (bez DPH, Bez dopravy)
58,60 € Výrobcem doporučená malobchodní cena.
Skladem,připraveno k odeslání do 48h
Kus
doneMade in Germany
Black stove-enamelled steel
Obsah:
1 Kus
Doprava:
The shipping costs for Česká republika could not be calculated automatically.
Poskytovatel:
Prodej a dodání do ToolTeam®
Platební metody:
Vratka:
Bezpečnost:
Údaje o výrobku
Výrobce:
HELM - Woelm GmbH
Stav:
Nový
SKU:
T-681942
SKU výrobce:
131103
GTIN kód (EAN):
4041518135897
Hmotnost:
0,00 Kg
Všechny informace týkající se produktů od HELM - Woelm GmbH. Technické a optické úpravy výrobce a chyby vyhrazeny.
This page has been machine-translated, the original german version can be found here, please also note the Zřeknutí se odpovědnosti za překlad.
Popis výrobku
1311..
For gates up to 100 kg
For screwing onto the floor
Function
The gate will go through Automatically locked when pressed against the locking device. A slight pressure on the catch hook releases the gate again.
Assembly
The gate holder is screwed to the floor at the desired locking point, which should be as far as possible from the gate hinge, using screws and dowels. At the appropriate point, the bracket is attached to the gate with three screws. The holder can be converted from floor to wall mounting by unscrewing the axle and moving the catch hook.
Související výsledky
Kompletní katalóg
Nabídka je zaměřena výhradně na firemní zákazníky, společnosti, veřejné instituce a živnostníky. Všechny ceny v katalozích jsou bez DPH, poštovného a příplatků, pokud li existují.
Výrobce je výhradně zodpovědný za obsah, cenu a detaily produktů a nabídek uvedených v katalozích. Technické a optické změny výrobce a chyby jsou vyhrazeny.
Výrobce je výhradně zodpovědný za obsah, cenu a detaily produktů a nabídek uvedených v katalozích. Technické a optické změny výrobce a chyby jsou vyhrazeny.
Odpovídající katalog
Nabídka komerčních zákazníků **
Návrhy produktů
-15%
KWS 1315 gate holder for walling in, floor mounting
131507
115,70 €
Bez dopravy
136,10 € Výrobcem doporučená malobchodní cena.
Bez dopravy
-15%
KWS 1315 gate holder for walling in, floor mounting
131503
115,70 €
Bez dopravy
136,10 € Výrobcem doporučená malobchodní cena.
Bez dopravy
-9%
KWS 1311 Screw-on gate holder, floor mounting
131102
53,25 €
Bez dopravy
58,60 € Výrobcem doporučená malobchodní cena.
Bez dopravy
-15%
KWS 1311 Screw-on gate holder, floor mounting
131182
88,19 €
Bez dopravy
103,75 € Výrobcem doporučená malobchodní cena.
Bez dopravy
-9%
HELM 981 S Galvanized steel roller, yellow, up to 250 kg
098111
42,70 €
Bez dopravy
47,05 € Výrobcem doporučená malobchodní cena.
Bez dopravy
-18%
KWS 7301 pipe bend 90° double bend, with side holes
730183
136,85 €
Bez dopravy
166,65 € Výrobcem doporučená malobchodní cena.
Bez dopravy
-9%
KWS 8640 profile support 135 x 150 x 25 mm, angled support
864070
41,29 €
Bez dopravy
45,45 € Výrobcem doporučená malobchodní cena.
Bez dopravy
KWS 2003 door buffer floor mounting, screwable, with pin
200333
17,15 €
Bez dopravy
Bez dopravy
-9%
KWS 2093 door buffer Ø 50 mm, black rubber ring
209382
37,95 €
Bez dopravy
41,75 € Výrobcem doporučená malobchodní cena.
Bez dopravy
-19%
KWS 2024 screw-on door stop, spring-loaded
202482
271,69 €
Bez dopravy
336,80 € Výrobcem doporučená malobchodní cena.
Bez dopravy
-18%
KWS 3F13 change set handle with button 3G10, round rosette
3F1383
192,15 €
Bez dopravy
234,05 € Výrobcem doporučená malobchodní cena.
Bez dopravy
-18%
KWS 7273 pipe bend 180°, r=200 mm, with internal bores
727382
205,45 €
Bez dopravy
250,20 € Výrobcem doporučená malobchodní cena.
Bez dopravy
-9%
KWS 4264 partition wall support 150 mm high, 30 mm support
426432
38,30 €
Bez dopravy
42,19 € Výrobcem doporučená malobchodní cena.
Bez dopravy
-15%
KWS 5160 shell handle 145 x 165 mm, 8 mm hole part, snap ring
516002
89,95 €
Bez dopravy
105,80 € Výrobcem doporučená malobchodní cena.
Bez dopravy
-19%
HELM GT-L 80 set stainless steel effect, damper, 2500 mm, ceiling
0057682
507,95 €
Bez dopravy
629,70 € Výrobcem doporučená malobchodní cena.
Bez dopravy
No Review yet
Description: No Review yet
Written by: No Review
Rating: 5 out of 5
5 stars, based on 1
reviews
Woelm KWS 1311 Screw-on gate holder, floor mounting 131103
Screw on
up to 100 kg
floor mounting
stove-enamelled
catch hook
Made in Germany
black
steel
gate holder
1311..
For gates up to 100 kg
For screwing onto the floor
Function
The gate will go through Automatically locked when pressed against the locking device. A slight pressure on the catch hook releases the gate again.
Assembly
The gate holder is screwed to the floor at the desired locking point, which should be as far as possible from the gate hinge, using screws and dowels. At the appropriate point, the bracket is attached to the gate with three screws. The holder can be converted from floor to wall mounting by unscrewing the axle and moving the catch hook. T-681942 131103 4041518135897 cs ["de","en","it","nl","nl","fr","es","pl","pt","cs","da","sv"] https://www.toolteam.com/cs-CZ/woelm-kws-1311-screw-on-gate-holder-floor-mounting-131103-t-681942-4041518135897?dc=CZ&cu=EUR 2026-09-04 53.25 Česká republika CZ DE 14
1311..
For gates up to 100 kg
For screwing onto the floor
Function
The gate will go through Automatically locked when pressed against the locking device. A slight pressure on the catch hook releases the gate again.
Assembly
The gate holder is screwed to the floor at the desired locking point, which should be as far as possible from the gate hinge, using screws and dowels. At the appropriate point, the bracket is attached to the gate with three screws. The holder can be converted from floor to wall mounting by unscrewing the axle and moving the catch hook. T-681942 131103 4041518135897 cs ["de","en","it","nl","nl","fr","es","pl","pt","cs","da","sv"] https://www.toolteam.com/cs-CZ/woelm-kws-1311-screw-on-gate-holder-floor-mounting-131103-t-681942-4041518135897?dc=CZ&cu=EUR 2026-09-04 53.25 Česká republika CZ DE 14