zoom_in
zoom_out
fullscreen
-9%
Woelm KWS 1307 gate holder for screwing on, floor mounting 130703
SKU: T-73664
42,40 € (vč. 19% daň, Bez dopravy)
35,63 € (bez DPH, Bez dopravy)
46,70 € Výrobcem doporučená malobchodní cena.
Skladem,připraveno k odeslání za 5 - 6 pracovních dnů
Kus
doneVyzařování: 106mm
doneModel: 1307.03
doneModel: 1307.03
doneMade in Germany
Malleable cast iron, black stove-enamelled, steel mounting bracket
Obsah:
1 Kus
Doprava:
The shipping costs for Česká republika could not be calculated automatically.
Poskytovatel:
Prodej a dodání do ToolTeam®
Platební metody:
Vratka:
Bezpečnost:
Údaje o výrobku
Výrobce:
HELM - Woelm GmbH
Stav:
Nový
SKU:
T-73664
SKU výrobce:
130703
GTIN kód (EAN):
4041518135842
Hmotnost:
0,00 Kg
Všechny informace týkající se produktů od HELM - Woelm GmbH. Technické a optické úpravy výrobce a chyby vyhrazeny.
This page has been machine-translated, the original german version can be found here, please also note the Zřeknutí se odpovědnosti za překlad.
Popis výrobku
1307..
For gates up to 100 kg
For screwing onto the floor
Function
The gate goes through Automatically locked when pressed against the locking device. A slight pressure on the catch hook releases the gate again.
Assembly
The gate holder is screwed to the floor at the desired locking point, which should have the greatest possible distance to the gate hinge. At the appropriate point, the bracket is fastened to the gate with a 4 mm height clearance to the stop plate of the holder so that the screw holes are under the catch hole. When locking the gate, the bracket also serves as a stop surface.
Dodatečné informace
Vyzařování:
106mm
Model:
1307.03
Související výsledky
Kompletní katalóg
Nabídka je zaměřena výhradně na firemní zákazníky, společnosti, veřejné instituce a živnostníky. Všechny ceny v katalozích jsou bez DPH, poštovného a příplatků, pokud li existují.
Výrobce je výhradně zodpovědný za obsah, cenu a detaily produktů a nabídek uvedených v katalozích. Technické a optické změny výrobce a chyby jsou vyhrazeny.
Výrobce je výhradně zodpovědný za obsah, cenu a detaily produktů a nabídek uvedených v katalozích. Technické a optické změny výrobce a chyby jsou vyhrazeny.
Odpovídající katalog
Nabídka komerčních zákazníků **
Návrhy produktů
-9%
KWS 1308 gate holder for screwing on, wall mounting
130803
42,40 €
Bez dopravy
46,70 € Výrobcem doporučená malobchodní cena.
Bez dopravy
-9%
KWS 1308 gate holder for screwing on, wall mounting
130807
42,40 €
Bez dopravy
46,70 € Výrobcem doporučená malobchodní cena.
Bez dopravy
-9%
KWS 1307 gate holder for screwing on, floor mounting
130707
42,40 €
Bez dopravy
46,70 € Výrobcem doporučená malobchodní cena.
Bez dopravy
HELM 340 U-rail EV1 anodised, length per meter
034044
21,30 €
Bez dopravy
Bez dopravy
-9%
KWS 2074 door buffer 60 mm wall clearance, Ø 30 mm, with rosette
207462
38,19 €
Bez dopravy
42,05 € Výrobcem doporučená malobchodní cena.
Bez dopravy
-9%
KWS 8216 door handle 150 x 150 x 18 mm handle plate, grained
821648
45,20 €
Bez dopravy
49,75 € Výrobcem doporučená malobchodní cena.
Bez dopravy
KWS 8604 profile support 110 x 90 x 50 mm, sloping support
860422
18,79 €
Bez dopravy
Bez dopravy
-18%
KWS 7274 pipe bend 180°, r=200 mm, with inside/outside bores
727483
205,45 €
Bez dopravy
250,20 € Výrobcem doporučená malobchodní cena.
Bez dopravy
-9%
KWS 4014 partition wall support 150 mm high, angled support
401432
52,55 €
Bez dopravy
57,85 € Výrobcem doporučená malobchodní cena.
Bez dopravy
-9%
KWS 4221 partition wall support 100 mm, 19 mm U-support, floor rosette
422182
58,65 €
Bez dopravy
64,59 € Výrobcem doporučená malobchodní cena.
Bez dopravy
-18%
KWS 3F13 change set handle with button 3G10, round rosette
3F1383
192,15 €
Bez dopravy
234,05 € Výrobcem doporučená malobchodní cena.
Bez dopravy
-15%
KWS 8042 center support Ø 42.4 x 2 mm tube, cranked, WS series
804282
109,15 €
Bez dopravy
128,40 € Výrobcem doporučená malobchodní cena.
Bez dopravy
-19%
KWS 8221 door handle Ø 30 mm, GL 200 - 1600 mm
822161
364,25 €
Bez dopravy
451,55 € Výrobcem doporučená malobchodní cena.
Bez dopravy
-7%
KWS 5316 handle 160 mm, cranked at the side, edged
531633
34,60 €
Bez dopravy
37,20 € Výrobcem doporučená malobchodní cena.
Bez dopravy
-15%
KWS 5160 shell handle 145 x 165 mm, 8 mm hole part, snap ring
516002
89,95 €
Bez dopravy
105,80 € Výrobcem doporučená malobchodní cena.
Bez dopravy
No Review yet
Description: No Review yet
Written by: No Review
Rating: 5 out of 5
5 stars, based on 1
reviews
Woelm KWS 1307 gate holder for screwing on, floor mounting 130703
Screw on
up to 100 kg
floor mounting
stove-enamelled
catch hook
bracket
Made in Germany
black
steel
stone oarlock
malleable iron
gate holder
1307..
For gates up to 100 kg
For screwing onto the floor
Function
The gate goes through Automatically locked when pressed against the locking device. A slight pressure on the catch hook releases the gate again.
Assembly
The gate holder is screwed to the floor at the desired locking point, which should have the greatest possible distance to the gate hinge. At the appropriate point, the bracket is fastened to the gate with a 4 mm height clearance to the stop plate of the holder so that the screw holes are under the catch hole. When locking the gate, the bracket also serves as a stop surface. T-73664 130703 4041518135842 cs ["de","en","it","nl","nl","fr","es","pl","pt","cs","da","sv"] https://www.toolteam.com/cs-CZ/woelm-kws-1307-gate-holder-for-screwing-on-floor-mounting-130703-t-73664-4041518135842?dc=CZ&cu=EUR 2026-07-13 42.4 Česká republika CZ DE 14
1307..
For gates up to 100 kg
For screwing onto the floor
Function
The gate goes through Automatically locked when pressed against the locking device. A slight pressure on the catch hook releases the gate again.
Assembly
The gate holder is screwed to the floor at the desired locking point, which should have the greatest possible distance to the gate hinge. At the appropriate point, the bracket is fastened to the gate with a 4 mm height clearance to the stop plate of the holder so that the screw holes are under the catch hole. When locking the gate, the bracket also serves as a stop surface. T-73664 130703 4041518135842 cs ["de","en","it","nl","nl","fr","es","pl","pt","cs","da","sv"] https://www.toolteam.com/cs-CZ/woelm-kws-1307-gate-holder-for-screwing-on-floor-mounting-130703-t-73664-4041518135842?dc=CZ&cu=EUR 2026-07-13 42.4 Česká republika CZ DE 14