Tyrolit - Precision Catalog Strana 183
Nabídka komerčních zákazníků **Nejlépe prodávané z Tyrolit – Schleifmittelwerke
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
SAFETY CUTTING AND GRINDING 181 Do’s & don’ts Handle and store grinding tools carefully; use the oldest tools first. Prior to mounting or use, grinding wheels must be cleaned and undergo a visual check for cracks or possible damage. Do not use abrasives that are exposed to particularly humid/wet conditions or high temperatures prior to mounting. Never use abrasives that have been dropped, damaged or that look like they would not be fit the purpose. Ceramic bonded grinding tools must undergo a sound check before mounting. Never exceed the specified maximum permissible operating speed. Make sure that the speed of the machine (RPM) does not exceed the maximum operating speed specified on the packaging or on the grinding tool. Do not use wheel flanges with surfaces that are not free of foreign bodies (e. g. grinding swarf), flat or burrfree. Ensure that the bore of the grinding tool – with or without thread – fits the shaft of the machine perfectly; and that the wheel flanges are clean, flat, the same size and suitable for the grinding tool to be clamped. Do not tighten the clamping device or wheel flange too much. Do not use recessed wheel flanges or flanges with recesses for grinding discs or cones. As intended or supplied, use the intermediate layers between the grinding wheel and wheel flanges. Never use force when clamping and do not make any changes to the grinding tool. Only use machines with protective covers and ensure their proper condition and fixture before the machine is switched on. Only use one-way adapters (hubs) once. After each mounting, carry out a test run for at least one minute at the operating speed and ensure the protective cover is mounted correctly. In doing so, ensure that any fragments would not be able to hit you or someone else in the event of a possible breakage. Eye protection is always recommended for all grinding processes. For off-hand grinding, protective goggles or a safety mask are recommended. When working with cut-off or rough-grinding wheels, ensure that the air supply and protective measures sufficiently correspond with the material to be processed. Suitable extraction systems should be fitted for all dry grinding processes. Only use machines that are also suitable for grinding tools with hub. Before stopping the machine, cut off the supply of cooling lubricant and remove the excess cooling lubricant from the grinding wheel. Only switch on the machine when the protection cover is correctly and securely fixed (machine guards or covers should be set in such a way that they divert sparks and grinding particles away from the body). Only start the machine if there is no contact between the workpiece and the grinding tool. Never work with grinding tools without sufficient air supply (never without breathing apparatus and ear protection, particularly in enclosed spaces) and without personal safety equipment (see pictogram). Use a suitable grinding tool – an unsuitable product can create excessive grinding particles and dust. Avoid mechanical damage to the grinding wheel as a result of force effects, jolting or heating. Never use grinding machines in an improper condition or which contain faulty components. Do not use cut-off wheels for grinding work (do not exert a lateral load on any cut-off wheels of shape 41 or 42). Never mount more than one grinding tool on one shaft. Never use grinding tools after the indicated expiry date. This is expressed as a month and year (e.g. 04/2016) and is usually located on the metal ring around the bore on cut-off or rough-grinding wheels. On other tool types (e.g. cup wheels), the expiry date may also be located on the label.
188 Stránky | Platí do 06/2026 | Previous page | Další stránka
Vyberte si jazyk
Legální problémy
Výrobce je výhradně zodpovědný za obsah, cenu a detaily produktů a nabídek uvedených v katalozích. Technické a optické změny výrobce a chyby jsou vyhrazeny.
Formulář žádosti o speciální produkty
Služba nákupu ToolTeam®
Hledáte produkty, které jsou uvedeny v katalogu, ale nelze je zakoupit přímo online?Naše služba nákupu vám ráda zpracuje nezávaznou a individuální nabídku.