TOX product catalogue Strana 83
Nabídka komerčních zákazníků **Nejlépe prodávané z TOX-DÜBEL
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Building materials & Holding values Liquix SOS C 20/25 Mz 12 HLz 12 Hbl 2 P2 ≥ 25 mm Wood 6/50 70 kg 60 kg - - 15 kg - - 8/50 80 kg 70 kg - - 30 kg - - 10/50 100 kg 90 kg 40 kg* 35 kg* 40 kg 35 kg* - The anchoring depth of the fastening must be observed Drilling method and drill hole cleaning must be adapted to the building material The recommended loads only apply to installation in the building material, not for installation in joints The specified curing time must be observed Approved wall plugs must be used for fixings where safety is of importance (see also www.tox.de/safety+loads) * with sieve sleeve Description & Area of Application Chemical / Heavy Duty For fixing light shelves, curtain rails, towel rails etc. For repairing torn-out hinges, holes drilled too large, wooden doors, etc. Fast reacting 2-component repair adhesive with very high strength Fast curing ensures rapid further processing (after 3-5 minutes) Suitable for indoor and outdoor use Processable from ≥ 10° C Processing & Installation For fastening: Clean drill hole 1. Clean drill hole 1. Torn out drill hole 2. Fill drill hole 2. Fill drill hole 3. Allow to cure 3. Allow to cure 4. Pre-drilling 4. Remove excess 4. Attach object 4. Attach object Always use a sieve sleeve for perforated and sheet building materials and cavity blocks Remove the sealing cap and put on the static mixer Discard the first 5 cm of the adhesive and do not use it for fastening Fill the drill hole completely with repair adhesive Approx. 5 minutes after filling the drill hole, screw the screw into the hardened compound. Pre-drill the core diameter of the screw for larger screw diameters Content of the cartridge (25 ml) is sufficient for min. 4 drill holes (at 10 mm diameter and 50 mm depth) Largely expansion pressure-free anchoring prevents damage to tiles and rendering When repairing: Torn out fittings, hinges or pieces of wood, - simply fill with Liquix SOS After curing, remove and grind off excess compound with a suitable tool (e.g. knife or drill) 83
216 Stránky | Platí do 12/2023 | Previous page | Další stránka
Vyberte si jazyk
Legální problémy
Výrobce je výhradně zodpovědný za obsah, cenu a detaily produktů a nabídek uvedených v katalozích. Technické a optické změny výrobce a chyby jsou vyhrazeny.
Formulář žádosti o speciální produkty
Služba nákupu ToolTeam®
Hledáte produkty, které jsou uvedeny v katalogu, ale nelze je zakoupit přímo online?Naše služba nákupu vám ráda zpracuje nezávaznou a individuální nabídku.