Rothoblaas - Wood screws and connectors Strana 33
Nabídka komerčních zákazníků **Nejlépe prodávané z RothoBlaas Deutschland
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
STATIC VALUES CHARACTERISTIC VALUES EN 1995:2014 SHEAR geometry timber-to-timber TENSION timber-to-timber thin steel-timber thick steel-timber with washer plate(2) plate(3) thread withdrawal(4) head head pull-through pull-through (5) with washer (5) A L b d1 b A RV,k RV,k RV,k RV,k Rax,k Rhead,k Rhead,k [mm] 80 80 80 80 80 120 120 120 120 120 120 120 120 [mm] 40 80 120 160 200 200 240 280 320 360 400 440 480 [kN] 4,87 6,00 6,00 6,00 6,00 6,00 6,00 6,00 6,00 6,00 6,00 6,00 6,00 [kN] 6,68 7,81 7,81 7,81 7,81 8,66 8,66 8,66 8,66 8,66 8,66 8,66 8,66 [kN] [kN] 9,79 9,79 9,79 9,79 9,79 11,30 11,30 11,30 11,30 11,30 11,30 11,30 11,30 [kN] 12,12 12,12 12,12 12,12 12,12 18,18 18,18 18,18 18,18 18,18 18,18 18,18 18,18 [kN] 4,88 4,88 4,88 4,88 4,88 4,88 4,88 4,88 4,88 4,88 4,88 4,88 4,88 [kN] 15,51 15,51 15,51 15,51 15,51 15,51 15,51 15,51 15,51 15,51 15,51 15,51 15,51 7,81 7,81 7,81 7,81 7,81 9,32 9,32 9,32 9,32 9,32 9,32 9,32 9,32 SPLATE = 12 mm L SPLATE = 6 mm d1 [mm] [mm] 120 160 200 240 280 320 360 12 400 440 480 520 560 600 NOTES: GENERAL PRINCIPLES: (1) The characteristic shear resistances are calculated considering an OSB3 or • Characteristic values comply with the EN 1995:2014 standard in accordance with ETA-11/0030. OSB4 panel, as per EN 300, or a particle board panel, as per EN 312, with thickness SPAN. (2) The shear resistance characteristics are calculated considering the case of a thin plate (SPLATE ≤ 0,5 d1). (3) The shear resistance characteristics are calculated considering the case of a thick plate (SPLATE ≥ d1). (4) The axial thread withdrawal resistance was calculated considering a 90° angle between the grain and the connector and for a fixing length of b. (5) The axial resistance to head pull-through, with and without a washer, was calculated using timber elements. In the case of steel-to-timber connections, generally the steel tensile strength is binding with respect to head separation or pull-through. • Design values can be obtained from characteristic values as follows: Rd = Rk kmod γM The coefficients γM and kmod should be taken according to the current regulations used for the calculation. • For the mechanical resistance values and the geometry of the screws, reference was made to ETA-11/0030. • For the calculation process a timber characteristic density ρk = 385 kg/m3 has been considered. • Values were calculated considering the threaded part as being completely inserted into the wood. • Sizing and verification of the timber elements, panels and steel plates must be done separately. • The characteristic shear resistances are calculated for screws inserted without pre-drilling hole. In the case of screws inserted with pre-drilling hole, greater resistance values can be obtained. • For different calculation configurations, the MyProject software is available (www.rothoblaas.com). CARPENTRY | HBS | 33
369 Stránky | Platí do 04/2024 | Previous page | Další stránka
Vyberte si jazyk
Legální problémy
Výrobce je výhradně zodpovědný za obsah, cenu a detaily produktů a nabídek uvedených v katalozích. Technické a optické změny výrobce a chyby jsou vyhrazeny.
Formulář žádosti o speciální produkty
Služba nákupu ToolTeam®
Hledáte produkty, které jsou uvedeny v katalogu, ale nelze je zakoupit přímo online?Naše služba nákupu vám ráda zpracuje nezávaznou a individuální nabídku.