Röhm Main Catalogue Clamping Technology Strana 649
Nabídka komerčních zákazníků **Nejlépe prodávané z RÖHM
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Technical data Quick-action clamping device change system For mandrels Type KFS 254-00 Typ KFS 254-00 Typ KFRKFS 256-00 256-00 Type For fa face drivers Typ 681-85 Type 681-85 For power chucks with direct mounting DIN 55026 Technical features: Exact take-up and positioning of the clamping device using short taper mount Change precision within 0.005 mm Change time approx. 30 seconds Easy handling of the change operation Locking the clamping device with 3 bayonet nuts and a collet chuck as intermediate piece for draw connection Rotary lock of bayonet nut High clamping precision Clamping cylinders without additional devices Stroke control on clamping cylinder Central lubrication and/or air sensing possible The manual quick-action clamping device change systems RMS, in combination with the RÖHM safety cylinders SZS, OVS, LHS-L, LVS, EHS and EVS, meet the guidelines of the Employer‘s Liability Insurance Association Function: A basic adapter is fastened to a turning spindle, in which a collet chuck is integrated for force transfer. The actual clamping device is adjusted on this basic adapter with quick-action clamping screws by a half turn of the wrench and then tightened. The collet chuck and clamping device are actuated via a safety clamping cylinder mounted to the end of the spindle without additional devices. Function description: The basic adapter with built-in collet chuck and draw piece with draw tube connection is screwed onto the spindle with 3 fastening screws. Through the positioning of the adapter of the respective clamping device (e.g. clamping mandrel, face driver, power chuck), the collet chuck is closed, thereby establishing the connection between the draw bar and actuating element (e.g. piston). The clamping device is fastened manually via 3 quick-action clamping screws by turning the wrench 1/2 turn each. The rotary lock of the bayonet nut is secured by a cylinder pin system. This guarantees equivalent fastening as compared to conventional fastening types. The clamping device is dismounted in the opposite order. www.eshop.roehm.biz 6135 Quick-action clamping device change system with centre DIN 6353
892 Stránky | Platí do 12/2024 | Previous page | Další stránka
Vyberte si jazyk
Legální problémy
Výrobce je výhradně zodpovědný za obsah, cenu a detaily produktů a nabídek uvedených v katalozích. Technické a optické změny výrobce a chyby jsou vyhrazeny.
Formulář žádosti o speciální produkty
Služba nákupu ToolTeam®
Hledáte produkty, které jsou uvedeny v katalogu, ale nelze je zakoupit přímo online?Naše služba nákupu vám ráda zpracuje nezávaznou a individuální nabídku.
