REMS main catalog tube processing Strana 289
Nabídka komerčních zákazníků **Produkty z katalogové stránky
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Confirmation of suitability The suitability of crimping tools is determined basically by the manufacturer of crimping tools. Moreover the suitability of REMS crimping tools has been confirmed by the system manufacturer/supplier himself or approved through independent testing institutes. Confirmation of suitability through the system manufacturer/supplier More than 90 % of the manufacturers/suppliers of the pressfitting systems listed herein have tested REMS pressing tongs and confirmed the suitability for their pressfitting system. Confirmation of suitability through independent testing institutes The suitability of REMS pressing tongs for additional pressfitting systems have been confirmed through independent technical institutes: TÜV-Certificates Exist for Geberit Mepla, Geberit Mapress CSTAHL, Geberit Mapress EDELSTAHL, Geberit Mapress Kupfer, Nussbaum Cupress, Nussbaum Optipress, Uponor Unipipe, Viega’profipress’, Viega’profipress G’, Viega’sanfix P’, Viega’sanpress’, Viega’Viegatherm P’, Wavin Tigris. The TÜVcertificates confirm that REMS crimping tools are suitable for producing perfect and systemconformity pressing joints corresponding to these systems. Suitability test according to DVGW W 534 (potable water) Pressing joints produced with REMS pressing tools were tested by the state operated material testing institute in Darmstadt/Germany or the material testing institute of the Land of NorthRhineWestphalia, Germany according to DVGW work sheet W 534. These material testing institutes are certified by the DVGW for making these tests. A representative crosssection of press joints of pressfitting systems Geberit Mapress Edelstahl, Raccorderie Metalliche inoxPRES, Raccord erie Metalliche steelPRES, Uponor Unipipe, Viega Megapress, Viega Profipress and Viega Raxofix. was tested. The tests led to the result that all REMS pressing tools are suitable for producing perfect and system conformity pressing joints in accordance with these systems. Info Suitability test according to DVGW G 5614 / VP 625 or prEN 1254-7 (gas) Pressing joints made with REMS pressing tools have been tested by the TÜV or by the Land Material Testing Institute NordrheinWestfalen or the DVGW Research Institute Karlsruhe according to DVGW Regulations G 5614 / VP 625 or by the BSI (UK) according to prEN 12547. A representative crosssection of pressing joints of the pressfitting systems Geberit Mapress Edelstahl Gas, Geberit Mapress Kupfer Gas, Henco Gas, IBP >B
392 Stránky | Platí do 12/2026 | Previous page | Další stránka
Vyberte si jazyk
Legální problémy
Výrobce je výhradně zodpovědný za obsah, cenu a detaily produktů a nabídek uvedených v katalozích. Technické a optické změny výrobce a chyby jsou vyhrazeny.
Formulář žádosti o speciální produkty
Služba nákupu ToolTeam®
Hledáte produkty, které jsou uvedeny v katalogu, ale nelze je zakoupit přímo online?Naše služba nákupu vám ráda zpracuje nezávaznou a individuální nabídku.