Remko Stationary Hot Air Heating Systems Strana 5
Nabídka komerčních zákazníků **Nejlépe prodávané z Remko
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
STATIONARY HOT AIR HEATING SYSTEMS Rapid heat, adapted to your needs Tailored heating of halls Adaptable and expandable Stationary hot air heaters are mainly used in industrial halls for continuous operation. They are installed to walls, ceilings or floors and can be adapted to the specific circumstances of the installation site according to the modular principle. Hot air heaters, however, can also be connected to an existing hot air heating plant. The heat can be directed wherever needed in a targeted manner using air control fins. Due to the easy assembly of the units, the required heating capacity can be adapted and expanded as needed at any time. An extensive heating pipe system does not have to be laid first as the oil- or gas-operated heaters operate without a transfer medium. The heat is dissipated immediately to the ambient air. This saves energy, providing pleasant temperatures immediately. Fresh-air operation Mixed-air operation The air to be heated is taken directly from the outside. In case of corresponding outside conditions, this method guarantees clean, unused air. Fresh air is brought into the room from outside (only ventilation, no heating) during fresh-air operation in the summer. According to the setting, more or less fresh air is suctioned in together with the room air. This method reduces heating costs because previously heated air from the heated room is used on the one hand and covers the necessary fresh-air requirement on the other. Recirculation air operation The air is taken from the room being heated and blown into the same room again after heating. This method cases the lowest operating costs because only the previously heated room air is reheated and circulated. 5
44 Stránky | Platí do 12/2024 | Previous page | Další stránka
Vyberte si jazyk
Legální problémy
Výrobce je výhradně zodpovědný za obsah, cenu a detaily produktů a nabídek uvedených v katalozích. Technické a optické změny výrobce a chyby jsou vyhrazeny.
Formulář žádosti o speciální produkty
Služba nákupu ToolTeam®
Hledáte produkty, které jsou uvedeny v katalogu, ale nelze je zakoupit přímo online?Naše služba nákupu vám ráda zpracuje nezávaznou a individuální nabídku.
