Pneumax - Process Automation Strana 73
Nabídka komerčních zákazníků **Nejlépe prodávané z Pneumax GmbH
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
S.V. 1/4” NPT - For safe area with IP66 stainless steel housing Series Steel line Process automation technology Catalogue Solenoid valves 1/4” NPT series Steel line - For safe area with IP66 stainless steel housing Stainless steel solenoid valves, complete with IP66 rated solenoid coil in a stainless steel housing and marked have been engineered and developed to meet process automation and Oil & Gas severe service requirements, where material performances, product reliability and health and safety issues are critical elements. As a result, Pneumax products are perfectly suitable to work with sweet gas media and corrosive / aggressive gases. The range includes solenoid valves with 3 and 5 ways functions, complete with self feeding solenoids, designed according to the following configuration: solenoid-spring valve, solenoid-solenoid valve, solenoid valve with self-locking manual reset, solenoid valve with self-locking manual reset inverted. Pneumax solenoid valves have 1/4” NPT connections with 1000Nl/min maximum flow rate. Pneumax solenoid valve utmost adaptability represent one of the main features to provide customized solution and module assembly solution, since both single mounting and integrated module design are available; thanks to distinctive Pneumax valve body design. Construction characteristics Body AISI 316L stainless steel Operators AISI 316L stainless steel Spool AISI 316L stainless steel Spring AISI 316 stainless steel Screws AISI 316 stainless steel (A4-70 stainless steel) Seals NBR for low temperatures FPM (Fluoroelastomer) (available on request) Operating range Fluid Filtered air. No lubrication needed, if applied it shall be continuous. Inert Gas. Sweet gas (natural). Operating temperature -20°C ... +70°C Note: The suitable operating temperature is limited by the most restrictive component, which is the pilot, regardless of the type of seals used in the valve spool. 10 bar Maximum operating pressure Electrical (Electropilot) construction characteristics Housing 304 stainless steel with epoxy paint Armour / Cores Ferromagnetic stainless steel Springs Stainless steel Seals FPM (Fluoroelastomer) Incorporation PBT 30% glass load Wire insulation H Nominal voltage 24 V DC 24, 110, 220 V AC Power consumption DC 2,4W Power consumption AC 10VA (Inrush), 5VA (Running) Connection for cable entry M20x1.5 (1/2” NPT available on request) Electrical connection Screw terminals 2 Poles 2.5 mm IP Rating IP66 Tolerance on voltage supply ±10% ED continuous service 100% Certifications available: Non ATEX marked product Suitable up to SIL 3 Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice 71 PROCESS AUTOMATION TECHNOLOGY All external and internal parts are AISI 316L stainless steel material in compliance with NACE standard MR0175/ISO 15156-1.
164 Stránky | Platí do 06/2025 | Previous page | Další stránka
Vyberte si jazyk
Legální problémy
Výrobce je výhradně zodpovědný za obsah, cenu a detaily produktů a nabídek uvedených v katalozích. Technické a optické změny výrobce a chyby jsou vyhrazeny.
Formulář žádosti o speciální produkty
Služba nákupu ToolTeam®
Hledáte produkty, které jsou uvedeny v katalogu, ale nelze je zakoupit přímo online?Naše služba nákupu vám ráda zpracuje nezávaznou a individuální nabídku.