Pneumax - Hauptkatalog Strana 923
Nabídka komerčních zákazníků **Nejlépe prodávané z Pneumax GmbH
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Compact cylinders Series 1500 - Short stroke cylinders Series 1500 - Short stroke compact cylinders General Profiled tube has three "T" slots on the three sides hosting sensors 1500._, RS._, HS._. without adaptors and with adaptor code 1380.01F codes 1580._, MRS._, MHS._. A complete range of clamps makes them easy to install under any conditions. It is interesting to note that as these cylinders (from Ø 32 to Ø 100) have anchoring holes with the same lead and thread as those of series 1320 ISO 6431, they accept all mountings except for the intermediate trunnion. Construction characteristics Body anodised aluminium Rod C43 chromed steel (stainless steel for magnetic cylinder Ø20 and Ø25) Piston aluminium Rod bushing anodised aluminium End cap anodised aluminium Seals Standard: NBR oil resistant rubber, PUR piston rod seals 3 (HNBR or FPM seals available upon request) Fluid Filtered air. No lubrication needed, if applied it shall be continuous. Max. pressure 10 bar Working temperature -5°C - +70°C with standard seals magnetic or non magnetic piston -5°C - +80°C with FPM seals magnetic piston -5°C - +80°C with HNBR seals magnetic piston -5°C - +120°C with HNBR seals non magnetic piston -5°C - +150°C with FPM seals non magnetic piston Please follow the suggestions below to ensure a long life for these cylinders: •use clean and lubricated air •correct alignment during assembly with regard to the applied load so as to avoid radial components or bending the rod. •avoid high speeds together with long strokes and heavy loads: this would produce kinetic energy which the cylinder cannot absorb, especially if used as a limit stop (in this case use mechanical stop device) •evaluate the environmental characteristics of cylinder used (high temperature, hard atmosphere, dust, humidity etc.) Please note: air must be dried for applications with lower temperature. Use hydraulic oils H class (ISO VG32) for correct continued lubrication. Our Technical Department will be glad to help. Standard strokes Double acting version Series 1501, 1504, 1511, 1514, 1515, 1516, 1517 and 1518 for all bores from 5 to 50 mm every 5 mm. On request are available strokes as follow: Ø 20 and Ø25 up to stroke 250 mm Ø 32 e Ø 40 up to stroke 300 mm Ø 50 e Ø 63 up to stroke 350 mm Ø 80 e Ø 100 up to stroke 400 mm Single acting version Series 1502, 1503, 1512 and 1513: For all bores from 5 to 10 mm. On request are available strokes up to 50 mm Type with non-rotating device: Ø 20 and Ø 25 from 5 to 40 mm every 5 mm. Ø 32 and Ø 40 from 5 to 50 mm every 5 mm. Ø 50 and Ø 63 from 5 to 60 mm every 5 mm. Ø 80 and Ø 100 from 5 to 80 mm every 5 mm. Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice 3 | 127 Pneumatic actuatiOn Operational characteristics
1106 Stránky | Platí do 06/2025 | Previous page | Další stránka
Vyberte si jazyk
Legální problémy
Výrobce je výhradně zodpovědný za obsah, cenu a detaily produktů a nabídek uvedených v katalozích. Technické a optické změny výrobce a chyby jsou vyhrazeny.
Formulář žádosti o speciální produkty
Služba nákupu ToolTeam®
Hledáte produkty, které jsou uvedeny v katalogu, ale nelze je zakoupit přímo online?Naše služba nákupu vám ráda zpracuje nezávaznou a individuální nabídku.